Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 00324da7 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Boris Brezillon
Browse files

mtd: rawnand: remove bf5xx_nand driver 



The blackfin architecture is getting removed, so this driver has
become obsolete.

Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@bootlin.com>
parent a722932a

drivers/mtd/nand/raw/Kconfig

+0 −32
Original line number Original line Diff line number Diff line
@@ -116,38 +116,6 @@ config MTD_NAND_AU1550 
	  This enables the driver for the NAND flash controller on the

	  This enables the driver for the NAND flash controller on the

	  AMD/Alchemy 1550 SOC.

	  AMD/Alchemy 1550 SOC.





config MTD_NAND_BF5XX

	tristate "Blackfin on-chip NAND Flash Controller driver"

	depends on BF54x || BF52x

	help

	  This enables the Blackfin on-chip NAND flash controller



	  No board specific support is done by this driver, each board

	  must advertise a platform_device for the driver to attach.



	  This driver can also be built as a module. If so, the module

	  will be called bf5xx-nand.



config MTD_NAND_BF5XX_HWECC

	bool "BF5XX NAND Hardware ECC"

	default y

	depends on MTD_NAND_BF5XX

	help

	  Enable the use of the BF5XX's internal ECC generator when

	  using NAND.



config MTD_NAND_BF5XX_BOOTROM_ECC

	bool "Use Blackfin BootROM ECC Layout"

	default n

	depends on MTD_NAND_BF5XX_HWECC

	help

	  If you wish to modify NAND pages and allow the Blackfin on-chip

	  BootROM to boot from them, say Y here.  This is only necessary

	  if you are booting U-Boot out of NAND and you wish to update

	  U-Boot from Linux' userspace.  Otherwise, you should say N here.



	  If unsure, say N.



config MTD_NAND_S3C2410

config MTD_NAND_S3C2410

	tristate "NAND Flash support for Samsung S3C SoCs"

	tristate "NAND Flash support for Samsung S3C SoCs"

	depends on ARCH_S3C24XX || ARCH_S3C64XX

	depends on ARCH_S3C24XX || ARCH_S3C64XX

drivers/mtd/nand/raw/Makefile

+0 −1
Original line number Original line Diff line number Diff line
@@ -11,7 +11,6 @@ obj-$(CONFIG_MTD_NAND_DENALI) += denali.o 
obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o

obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o

obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o

obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o

obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o

obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o

obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o

obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o

obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o

obj-$(CONFIG_MTD_NAND_TANGO)		+= tango_nand.o

obj-$(CONFIG_MTD_NAND_TANGO)		+= tango_nand.o

obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o

obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o

drivers/mtd/nand/raw/bf5xx_nand.c

deleted100644 → 0
+0 −861

File deleted.

Preview size limit exceeded, changes collapsed.