Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit fcb90ba7 authored by Mike Frysinger's avatar Mike Frysinger Committed by David Woodhouse
Browse files

[MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses 



Signed-off-by: default avatarMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: default avatarBryan Wu <cooloney@kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent cf840392

drivers/mtd/nand/Kconfig

+12 −0
Original line number Diff line number Diff line
@@ -109,6 +109,18 @@ config MTD_NAND_BF5XX_HWECC 
	  Enable the use of the BF5XX's internal ECC generator when

	  using NAND.



config MTD_NAND_BF5XX_BOOTROM_ECC

	bool "Use Blackfin BootROM ECC Layout"

	default n

	depends on MTD_NAND_BF5XX_HWECC

	help

	  If you wish to modify NAND pages and allow the Blackfin on-chip

	  BootROM to boot from them, say Y here.  This is only necessary

	  if you are booting U-Boot out of NAND and you wish to update

	  U-Boot from Linux' userspace.  Otherwise, you should say N here.



	  If unsure, say N.



config MTD_NAND_RTC_FROM4

	tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"

	depends on SH_SOLUTION_ENGINE

drivers/mtd/nand/bf5xx_nand.c

+40 −0
Original line number Diff line number Diff line
@@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] = 
	 P_NAND_ALE,

	 0};



#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC

static uint8_t bbt_pattern[] = { 0xff };



static struct nand_bbt_descr bootrom_bbt = {

	.options = 0,

	.offs = 63,

	.len = 1,

	.pattern = bbt_pattern,

};



static struct nand_ecclayout bootrom_ecclayout = {

	.eccbytes = 24,

	.eccpos = {

		0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,

		0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,

		0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,

		0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,

		0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,

		0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,

		0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,

		0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2

	},

	.oobfree = {

		{ 0x8 * 0 + 3, 5 },

		{ 0x8 * 1 + 3, 5 },

		{ 0x8 * 2 + 3, 5 },

		{ 0x8 * 3 + 3, 5 },

		{ 0x8 * 4 + 3, 5 },

		{ 0x8 * 5 + 3, 5 },

		{ 0x8 * 6 + 3, 5 },

		{ 0x8 * 7 + 3, 5 },

	}

};

#endif



/*

 * Data structures for bf5xx nand flash controller driver

 */
@@ -712,6 +747,11 @@ static int bf5xx_nand_probe(struct platform_device *pdev) 


	/* setup hardware ECC data struct */

	if (hardware_ecc) {

#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC

		chip->badblock_pattern = &bootrom_bbt;

		chip->ecc.layout = &bootrom_ecclayout;

#endif



		if (plat->page_size == NFC_PG_SIZE_256) {

			chip->ecc.bytes = 3;

			chip->ecc.size = 256;