Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit fb78f1f1 authored by Linux Build Service Account's avatar Linux Build Service Account Committed by Gerrit - the friendly Code Review server
Browse files

Merge "ARM: dts: msm: add PM660, PM660a and PM660l PMIC peripheral devices"

parents 6db5d8f2 8f14a6a8

arch/arm64/boot/dts/qcom/pm660.dtsi

0 → 100644
+631 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include <dt-bindings/spmi/spmi.h>

#include <dt-bindings/interrupt-controller/irq.h>



&spmi_bus {

	qcom,pm660@0 {

		compatible ="qcom,spmi-pmic";

		reg = <0x0 SPMI_USID>;

		#address-cells = <2>;

		#size-cells = <0>;



		pm660_revid: qcom,revid@100 {

			compatible = "qcom,qpnp-revid";

			reg = <0x100 0x100>;

			qcom,fab-id-valid;

		};



		pm660_misc: qcom,misc@900 {

			compatible = "qcom,qpnp-misc";

			reg = <0x900 0x100>;

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800 0x100>;

			interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,

				     <0x0 0x8 0x1 IRQ_TYPE_NONE>,

				     <0x0 0x8 0x4 IRQ_TYPE_NONE>,

				     <0x0 0x8 0x5 IRQ_TYPE_NONE>;

			interrupt-names = "kpdpwr", "resin",

					"resin-bark", "kpdpwr-resin-bark";

			qcom,pon-dbc-delay = <15625>;

			qcom,kpdpwr-sw-debounce;

			qcom,system-reset;

			qcom,store-hard-reset-reason;



			qcom,pon_1 {

				qcom,pon-type = <0>;

				qcom,pull-up = <1>;

				linux,code = <116>;

			};



			qcom,pon_2 {

				qcom,pon-type = <1>;

				qcom,pull-up = <1>;

				linux,code = <114>;

			};

		};



		qcom,temp-alarm@2400 {

			compatible = "qcom,qpnp-temp-alarm";

			reg = <0x2400 0x100>;

			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;

			label = "pm660_tz";

			qcom,channel-num = <6>;

			qcom,temp_alarm-vadc = <&pm660_vadc>;

		};



		pm660_gpios: gpios {

			compatible = "qcom,qpnp-pin";

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pm660-gpio";



			gpio@c000 {

				reg = <0xc000 0x100>;

				qcom,pin-num = <1>;

				status = "disabled";

			};



			gpio@c100 {

				reg = <0xc100 0x100>;

				qcom,pin-num = <2>;

				status = "disabled";

			};



			gpio@c200 {

				reg = <0xc200 0x100>;

				qcom,pin-num = <3>;

				status = "disabled";

			};



			gpio@c300 {

				reg = <0xc300 0x100>;

				qcom,pin-num = <4>;

				status = "disabled";

			};



			gpio@c400 {

				reg = <0xc400 0x100>;

				qcom,pin-num = <5>;

				status = "disabled";

			};



			gpio@c500 {

				reg = <0xc500 0x100>;

				qcom,pin-num = <6>;

				status = "disabled";

			};



			gpio@c600 {

				reg = <0xc600 0x100>;

				qcom,pin-num = <7>;

				status = "disabled";

			};



			gpio@c700 {

				reg = <0xc700 0x100>;

				qcom,pin-num = <8>;

				status = "disabled";

			};



			gpio@c800 {

				reg = <0xc800 0x100>;

				qcom,pin-num = <9>;

				status = "disabled";

			};



			gpio@c900 {

				reg = <0xc900 0x100>;

				qcom,pin-num = <10>;

				status = "disabled";

			};



			gpio@ca00 {

				reg = <0xca00 0x100>;

				qcom,pin-num = <11>;

				status = "disabled";

			};



			gpio@cb00 {

				reg = <0xcb00 0x100>;

				qcom,pin-num = <12>;

				status = "disabled";

			};



			gpio@cc00 {

				reg = <0xcc00 0x100>;

				qcom,pin-num = <13>;

				status = "disabled";

			};

		};



		pm660_coincell: qcom,coincell@2800 {

			compatible = "qcom,qpnp-coincell";

			reg = <0x2800 0x100>;

		};



		pm660_rtc: qcom,pm660_rtc {

			compatible = "qcom,qpnp-rtc";

			#address-cells = <1>;

			#size-cells = <1>;

			qcom,qpnp-rtc-write = <0>;

			qcom,qpnp-rtc-alarm-pwrup = <0>;



			qcom,pm660_rtc_rw@6000 {

				reg = <0x6000 0x100>;

			};

			qcom,pm660_rtc_alarm@6100 {

				reg = <0x6100 0x100>;

				interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;

			};

		};



		pm660_vadc: vadc@3100 {

			compatible = "qcom,qpnp-vadc-hc";

			reg = <0x3100 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1875>;



			chan@6 {

				label = "die_temp";

				reg = <6>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <3>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

				qcom,cal-val = <0>;

			};



			chan@0 {

				label = "ref_gnd";

				reg = <0>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

				qcom,cal-val = <0>;

			};



			chan@1 {

				label = "ref_1250v";

				reg = <1>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

				qcom,cal-val = <0>;

			};



			chan@83 {

				label = "vph_pwr";

				reg = <0x83>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@85 {

				label = "vcoin";

				reg = <0x85>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@4c {

				label = "xo_therm";

				reg = <0x4c>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <4>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

			};



			chan@4d {

				label = "msm_therm";

				reg = <0x4d>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

			};



			chan@51 {

				label = "quiet_therm";

				reg = <0x51>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

			};



			chan@4e {

				label = "emmc_therm";

				reg = <0x4e>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

				qcom,vadc-thermal-node;

			};



			chan@4f {

				label = "pa_therm0";

				reg = <0x4f>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

				qcom,vadc-thermal-node;

			};



			chan@1d {

				label = "drax_temp";

				reg = <0x1d>;

				qcom,decimation = <2>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <3>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

				qcom,cal-val = <0>;

			};

		};



		pm660_charger: qcom,qpnp-smb2 {

			compatible = "qcom,qpnp-smb2";

			#address-cells = <1>;

			#size-cells = <1>;



			qcom,pmic-revid = <&pm660_revid>;



			io-channels = <&pm660_rradc 8>,

				      <&pm660_rradc 10>,

				      <&pm660_rradc 3>,

				      <&pm660_rradc 4>;

			io-channel-names = "charger_temp",

					   "charger_temp_max",

					   "usbin_i",

					   "usbin_v";



			qcom,wipower-max-uw = <5000000>;

			dpdm-supply = <&qusb_phy0>;



			qcom,thermal-mitigation

					= <3000000 2500000 2000000 1500000

						1000000 500000>;



			qcom,chgr@1000 {

				reg = <0x1000 0x100>;

				interrupts =

					<0x0 0x10 0x0 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x10 0x1 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x10 0x2 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x10 0x3 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x10 0x4 IRQ_TYPE_EDGE_RISING>;



				interrupt-names = "chg-error",

						  "chg-state-change",

						  "step-chg-state-change",

						  "step-chg-soc-update-fail",

						  "step-chg-soc-update-request";

			};



			qcom,otg@1100 {

				reg = <0x1100 0x100>;

				interrupts = <0x0 0x11 0x0 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x11 0x1 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x11 0x2 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x11 0x3 IRQ_TYPE_EDGE_BOTH>;



				interrupt-names = "otg-fail",

						  "otg-overcurrent",

						  "otg-oc-dis-sw-sts",

						  "testmode-change-detect";

			};



			qcom,bat-if@1200 {

				reg = <0x1200 0x100>;

				interrupts =

					<0x0 0x12 0x0 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x12 0x1 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x12 0x3 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x12 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x12 0x5 IRQ_TYPE_EDGE_BOTH>;



				interrupt-names = "bat-temp",

						  "bat-ocp",

						  "bat-ov",

						  "bat-low",

						  "bat-therm-or-id-missing",

						  "bat-terminal-missing";

			};



			qcom,usb-chgpth@1300 {

				reg = <0x1300 0x100>;

				interrupts =

					<0x0 0x13 0x0 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x13 0x1 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x13 0x2 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x13 0x3 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x13 0x5 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x13 0x7 IRQ_TYPE_EDGE_RISING>;



				interrupt-names = "usbin-collapse",

						  "usbin-lt-3p6v",

						  "usbin-uv",

						  "usbin-ov",

						  "usbin-plugin",

						  "usbin-src-change",

						  "usbin-icl-change",

						  "type-c-change";

			};



			qcom,dc-chgpth@1400 {

				reg = <0x1400 0x100>;

				interrupts =

					<0x0 0x14 0x0 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x14 0x1 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x14 0x2 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x14 0x3 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x14 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x14 0x5 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x14 0x6 IRQ_TYPE_EDGE_RISING>;



				interrupt-names = "dcin-collapse",

						  "dcin-lt-3p6v",

						  "dcin-uv",

						  "dcin-ov",

						  "dcin-plugin",

						  "div2-en-dg",

						  "dcin-icl-change";

			};



			qcom,chgr-misc@1600 {

				reg = <0x1600 0x100>;

				interrupts =

					<0x0 0x16 0x0 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>,

					<0x0 0x16 0x2 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x16 0x3 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x16 0x4 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x16 0x5 IRQ_TYPE_EDGE_BOTH>,

					<0x0 0x16 0x6 IRQ_TYPE_EDGE_FALLING>,

					<0x0 0x16 0x7 IRQ_TYPE_EDGE_BOTH>;



				interrupt-names = "wdog-snarl",

						  "wdog-bark",

						  "aicl-fail",

						  "aicl-done",

						  "high-duty-cycle",

						  "input-current-limiting",

						  "temperature-change",

						  "switcher-power-ok";

			};

		};



		pm660_pdphy: qcom,usb-pdphy@1700 {

			compatible = "qcom,qpnp-pdphy";

			reg = <0x1700 0x100>;

			vdd-pdphy-supply = <&pm660l_l7>;

			vbus-supply = <&smb2_vbus>;

			vconn-supply = <&smb2_vconn>;

			interrupts = <0x0 0x17 0x0 IRQ_TYPE_EDGE_RISING>,

				     <0x0 0x17 0x1 IRQ_TYPE_EDGE_RISING>,

				     <0x0 0x17 0x2 IRQ_TYPE_EDGE_RISING>,

				     <0x0 0x17 0x3 IRQ_TYPE_EDGE_RISING>,

				     <0x0 0x17 0x4 IRQ_TYPE_EDGE_RISING>,

				     <0x0 0x17 0x5 IRQ_TYPE_EDGE_RISING>,

				     <0x0 0x17 0x6 IRQ_TYPE_EDGE_RISING>;



			interrupt-names = "sig-tx",

					  "sig-rx",

					  "msg-tx",

					  "msg-rx",

					  "msg-tx-failed",

					  "msg-tx-discarded",

					  "msg-rx-discarded";



			qcom,default-sink-caps = <5000 3000>, /* 5V @ 3A */

						 <9000 3000>; /* 9V @ 3A */

		};



		pm660_adc_tm: vadc@3400 {

			compatible = "qcom,qpnp-adc-tm-hc";

			reg = <0x3400 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1875>;

			qcom,adc_tm-vadc = <&pm660_vadc>;

			qcom,decimation = <0>;

			qcom,fast-avg-setup = <0>;



			chan@83 {

				label = "vph_pwr";

				reg = <0x83>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,btm-channel-number = <0x60>;

			};



			chan@4d {

				label = "msm_therm";

				reg = <0x4d>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,btm-channel-number = <0x68>;

				qcom,thermal-node;

			};



			chan@51 {

				label = "quiet_therm";

				reg = <0x51>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,btm-channel-number = <0x70>;

				qcom,thermal-node;

			};



			chan@4c {

				label = "xo_therm";

				reg = <0x4c>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <4>;

				qcom,hw-settle-time = <2>;

				qcom,btm-channel-number = <0x78>;

				qcom,thermal-node;

			};

		};



		pm660_rradc: rradc@4500 {

			compatible = "qcom,rradc";

			reg = <0x4500 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			#io-channel-cells = <1>;

			qcom,pmic-revid = <&pm660_revid>;

		};



		pm660_fg: qpnp,fg {

			compatible = "qcom,fg-gen3";

			#address-cells = <1>;

			#size-cells = <1>;

			qcom,pmic-revid = <&pm660_revid>;

			io-channels = <&pm660_rradc 0>,

				      <&pm660_rradc 7>;

			io-channel-names = "rradc_batt_id",

					   "rradc_die_temp";

			qcom,rradc-base = <0x4500>;

			qcom,fg-esr-timer-awake = <96 96>;

			qcom,fg-esr-timer-asleep = <256 256>;

			qcom,fg-esr-timer-charging = <0 96>;

			qcom,cycle-counter-en;

			status = "okay";



			qcom,fg-batt-soc@4000 {

				status = "okay";

				reg = <0x4000 0x100>;

				interrupts = <0x0 0x40 0x0 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x40 0x1 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x40 0x2

							IRQ_TYPE_EDGE_RISING>,

					     <0x0 0x40 0x3

							IRQ_TYPE_EDGE_RISING>,

					     <0x0 0x40 0x4 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x40 0x5

							IRQ_TYPE_EDGE_RISING>,

					     <0x0 0x40 0x6 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x40 0x7 IRQ_TYPE_EDGE_BOTH>;

				interrupt-names = "soc-update",

						  "soc-ready",

						  "bsoc-delta",

						  "msoc-delta",

						  "msoc-low",

						  "msoc-empty",

						  "msoc-high",

						  "msoc-full";

			};



			qcom,fg-batt-info@4100 {

				status = "okay";

				reg = <0x4100 0x100>;

				interrupts = <0x0 0x41 0x0 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x41 0x1 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x41 0x2 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x41 0x3 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x41 0x6 IRQ_TYPE_EDGE_BOTH>;

				interrupt-names = "vbatt-pred-delta",

						  "vbatt-low",

						  "esr-delta",

						  "batt-missing",

						  "batt-temp-delta";

			};



			qcom,fg-memif@4400 {

				status = "okay";

				reg = <0x4400 0x100>;

				interrupts = <0x0 0x44 0x0 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x44 0x1 IRQ_TYPE_EDGE_BOTH>,

					     <0x0 0x44 0x2 IRQ_TYPE_EDGE_BOTH>;

				interrupt-names = "ima-rdy",

						  "mem-xcp",

						  "dma-grant";

			};

		};



		bcl@4200 {

			compatible = "qcom,msm-bcl-lmh";

			reg = <0x4200 0xff>,

				<0x4300 0xff>;

			reg-names = "fg_user_adc",

					"fg_lmh";

			interrupts = <0x0 0x42 0x0 IRQ_TYPE_NONE>,

					<0x0 0x42 0x2 IRQ_TYPE_NONE>;

			interrupt-names = "bcl-high-ibat-int",

					"bcl-low-vbat-int";

			qcom,vbat-polling-delay-ms = <100>;

			qcom,ibat-polling-delay-ms = <100>;

		};

	};



	qcom,pm660@1 {

		compatible ="qcom,spmi-pmic";

		reg = <0x1 SPMI_USID>;

		#address-cells = <2>;

		#size-cells = <0>;

	};

};

arch/arm64/boot/dts/qcom/pm660a.dtsi

0 → 100644
+29 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/* Disable WLED */

&pm660l_wled {

	status = "disabled";

};



/* disable LCDB */

&pm660l_lcdb {

	status = "disabled";

};



&pm660a_oledb {

	status = "okay";

};



&pm660a_labibb {

	status = "okay";

};

arch/arm64/boot/dts/qcom/pm660l.dtsi

0 → 100644
+470 −0

File added.

Preview size limit exceeded, changes collapsed.