Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit f20941f3 authored by Alan Cox's avatar Alan Cox Committed by Jeff Garzik
Browse files

pata_sis: Implement MWDMA for the UDMA 133 capable chips 



Bartlomiej pointed out that while this got fixed in the old driver whoever
did it didn't port it across.

Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 10734fc8

drivers/ata/pata_sis.c

+69 −22
Original line number Diff line number Diff line
@@ -252,24 +252,25 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) 
}



/**

 *	sis_133_set_piomode - Initialize host controller PATA PIO timings

 *	sis_133_do_piomode - Initialize host controller PATA PIO/DMA timings

 *	@ap: Port whose timings we are configuring

 *	@adev: Device we are configuring for.

 *

 *	Set PIO mode for device, in host controller PCI config space. This

 *	function handles PIO set up for the later ATA133 devices.

 *	function handles PIO set up for the later ATA133 devices. The same

 *	timings are used for MWDMA.

 *

 *	LOCKING:

 *	None (inherited from caller).

 */



static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)

static void sis_133_do_piomode(struct ata_port *ap, struct ata_device *adev,

					int speed)

{

	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);

	int port = 0x40;

	u32 t1;

	u32 reg54;

	int speed = adev->pio_mode - XFER_PIO_0;



	const u32 timing133[] = {

		0x28269000,	/* Recovery << 24 | Act << 16 | Ini << 12 */
@@ -304,6 +305,42 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev) 
	pci_write_config_byte(pdev, port, t1);

}



/**

 *	sis_133_set_piomode - Initialize host controller PATA PIO timings

 *	@ap: Port whose timings we are configuring

 *	@adev: Device we are configuring for.

 *

 *	Set PIO mode for device, in host controller PCI config space. This

 *	function handles PIO set up for the later ATA133 devices.

 *

 *	LOCKING:

 *	None (inherited from caller).

 */



static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)

{



	sis_133_do_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);

}



/**

 *	mwdma_clip_to_pio		-	clip MWDMA mode

 *	@adev: device

 *

 *	As the SiS shared MWDMA and PIO timings we must program the equivalent

 *	PIO timing for the MWDMA mode but we must not program one higher than

 *	the permitted PIO timing of the device.

 */



static int mwdma_clip_to_pio(struct ata_device *adev)

{

	const int mwdma_to_pio[3] = {

		XFER_PIO_0, XFER_PIO_3, XFER_PIO_4

	};

	return min(mwdma_to_pio[adev->dma_mode - XFER_MW_DMA_0],

				adev->pio_mode - XFER_PIO_0);

}



/**

 *	sis_old_set_dmamode - Initialize host controller PATA DMA timings

 *	@ap: Port whose timings we are configuring
@@ -332,6 +369,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) 
	if (adev->dma_mode < XFER_UDMA_0) {

		/* bits 3-0 hold recovery timing bits 8-10 active timing and

		   the higher bits are dependant on the device */

		speed = mwdma_clip_to_pio(adev);

		timing &= ~0x870F;

		timing |= mwdma_bits[speed];

	} else {
@@ -372,6 +410,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) 
	if (adev->dma_mode < XFER_UDMA_0) {

		/* bits 3-0 hold recovery timing bits 8-10 active timing and

		   the higher bits are dependant on the device, bit 15 udma */

		speed = mwdma_clip_to_pio(adev);

		timing &= ~0x870F;

		timing |= mwdma_bits[speed];

	} else {
@@ -389,7 +428,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) 
 *	@adev: Device to program

 *

 *	Set UDMA/MWDMA mode for device, in host controller PCI config space.

 *	Handles UDMA66 and early UDMA100 devices.

 *	Handles later UDMA100 devices.

 *

 *	LOCKING:

 *	None (inherited from caller).
@@ -400,21 +439,25 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) 
	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);

	int speed = adev->dma_mode - XFER_MW_DMA_0;

	int drive_pci = sis_old_port_base(adev);

	u8 timing;

	u16 timing;



	const u8 udma_bits[]  = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};

	const u16 udma_bits[]  = {

		0x8B00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};

	const u8 mwdma_bits[] = { 0x08, 0x32, 0x31 };



	pci_read_config_byte(pdev, drive_pci + 1, &timing);

	pci_read_config_word(pdev, drive_pci, &timing);



	if (adev->dma_mode < XFER_UDMA_0) {

		/* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */

		speed = mwdma_clip_to_pio(adev);

		timing &= ~0x80FF;

		timing |= mwdma_bits[speed];

	} else {

		/* Bit 7 is UDMA on/off, bit 0-3 are cycle time */

		speed = adev->dma_mode - XFER_UDMA_0;

		timing &= ~0x8F;

		timing &= ~0x8F00;

		timing |= udma_bits[speed];

	}

	pci_write_config_byte(pdev, drive_pci + 1, timing);

	pci_write_config_word(pdev, drive_pci, timing);

}



/**
@@ -434,21 +477,26 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a 
	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);

	int speed = adev->dma_mode - XFER_MW_DMA_0;

	int drive_pci = sis_old_port_base(adev);

	u8 timing;

	/* Low 4 bits are timing */

	static const u8 udma_bits[]  = { 0x8F, 0x8A, 0x87, 0x85, 0x83, 0x82, 0x81};

	u16 timing;

	/* Bits 15-12  are timing */

	static const u16 udma_bits[]  = {

		0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100

	};

	static const u8 mwdma_bits[] = { 0x08, 0x32, 0x31 };



	pci_read_config_byte(pdev, drive_pci + 1, &timing);

	pci_read_config_word(pdev, drive_pci, &timing);



	if (adev->dma_mode < XFER_UDMA_0) {

		/* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */

		speed = mwdma_clip_to_pio(adev);

		timing &= ~0x80FF;

		timing = mwdma_bits[speed];

	} else {

		/* Bit 7 is UDMA on/off, bit 0-3 are cycle time */

		speed = adev->dma_mode - XFER_UDMA_0;

		timing &= ~0x8F;

		timing &= ~0x8F00;

		timing |= udma_bits[speed];

	}

	pci_write_config_byte(pdev, drive_pci + 1, timing);

	pci_write_config_word(pdev, drive_pci, timing);

}



/**
@@ -479,13 +527,12 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev) 
	if (reg54 & 0x40000000)

		port = 0x70;

	port += (8 * ap->port_no) +  (4 * adev->devno);



	pci_read_config_dword(pdev, port, &t1);



	if (adev->dma_mode < XFER_UDMA_0) {

		t1 &= ~0x00000004;

		/* FIXME: need data sheet to add MWDMA here. Also lacking on

		   ide/pci driver */

		speed = mwdma_clip_to_pio(adev);

		sis_133_do_piomode(ap, adev, speed);

		t1 &= ~4;	/* UDMA off */

	} else {

		speed = adev->dma_mode - XFER_UDMA_0;

		/* if & 8 no UDMA133 - need info for ... */