Merge "msm: camera: Add EEPROM device for depth"

		clock-rates = <24000000>;

	};

	eeprom_depth: qcom,eeprom@4 {

		cell-index = <4>;

		reg = <0x4>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8998_lvs1>; /* checked, MTP845 */

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_eyetracking_force>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				&cam_sensor_depth_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&cam_sensor_depth_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>,

			<&tlmm 23 0>,

			<&tlmm 24 0>;

		gpio-reset = <1>;   //RESET

		gpio-vana = <2>;

		gpio-vdig = <3>;

		gpio-req-tbl-num = <0 1 2 3> ;

		gpio-req-tbl-flags = <1 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1",

					"CAM_VDIG1";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

	qcom,cam-sensor@4 {

		cell-index = <4>;

		compatible = "qcom,cam-sensor";

		sensor-position-roll = <270>; /* checked, MTP845 */

		sensor-position-pitch = <0>; /* checked, MTP845 */

		sensor-position-yaw = <180>; /* checked, MTP845 */

		eeprom-src = <&eeprom_depth>;

		cam_vio-supply = <&pm8998_lvs1>; /* checked, MTP845 */

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_eyetracking_force>;