Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ebb763a2 authored by Ray Zhang's avatar Ray Zhang Committed by Gerrit - the friendly Code Review server
Browse files

drm/bridge: add LT9611 DSI to HDMI bridge driver 



Add LT9611 bridge driver to support DSI to HDMI output.
Configure the LT9611 chip via I2C for audio/video setup.

CRs-Fixed: 2140653
Change-Id: I3a1868df136041748e3cf212cc25b5bb91ed174c
Signed-off-by: default avatarRay Zhang <rayz@codeaurora.org>
parent 7a126ad9

Documentation/devicetree/bindings/display/bridge/lt9611.txt

0 → 100644
+125 −0
Original line number Diff line number Diff line 
LT9611 DSI to HDMI bridge





Required properties:

	- compatible:				Must be "lt,lt9611"

	- reg:					Main I2C slave ID (for I2C host driver)

	- lt,irq-gpio:				Main IRQ gpio mapping

	- lt,reset-gpio				Main reset gpio mapping





	Optional properties:

	- lt,hdmi-ps-gpio:			gpio mapping for HDMI PS

	- lt,hdmi-en-gpio:			gpio mapping for HDMI EN



	- lt,supply-entries:			A node that lists the elements of the supply used to

						power the bridge. There can be more than one instance

						of this binding, in which case the entry would be

						appended with the supply entry index.

	e.g. lt,supply-entry@0

	-- lt,supply-name: name of the supply (vdd/vcc)

	-- lt,supply-min-voltage: minimum voltage level (uV)

	-- lt,supply-max-voltage: maximum voltage level (uV)

	-- lt,supply-enable-load: load drawn (uA) from enabled supply

	-- lt,supply-disable-load: load drawn (uA) from disabled supply

	-- lt,supply-ulp-load: load drawn (uA) from supply in ultra-low power mode

	-- lt,supply-pre-on-sleep: time to sleep (ms) before turning on

	-- lt,supply-post-on-sleep: time to sleep (ms) after turning on

	-- lt,supply-pre-off-sleep: time to sleep (ms) before turning off

	-- lt,supply-post-off-sleep: time to sleep (ms) after turning off



	- lt,non-pluggable: Boolean to indicate if display is non pluggable.

	- lt,customize-modes: Customized modes when it's non-pluggable display.

	e.g. lt,customize-mode-id@0

	-- lt,mode-h-active: Horizontal active pixels for this mode.

	-- lt,mode-h-front-porch: Horizontal front porch in pixels for this mode.

	-- lt,mode-h-pulse-width: Horizontal sync width in pixels for this mode.

	-- lt,mode-h-back-porch: Horizontal back porch in pixels for this mode.

	-- lt,mode-h-active-high: Boolean to indicate if mode horizontal polarity is active high.

	-- lt,mode-v-active: Vertical active lines for this mode.

	-- lt,mode-v-front-porch: Vertical front porch in lines for this mode.

	-- lt,mode-v-pulse-width: Vertical sync width in lines for this mode.

	-- lt,mode-v-back-porch: Vertical back porch in lines for this mode.

	-- lt,mode-v-active-high: Boolean to indicate if mode vertical polarity is active high.

	-- lt,mode-refersh-rate: Mode refresh rate in hertz.

	-- lt,mode-clock-in-khz: Mode pclk in KHz.



Required nodes:



The LT9611 has one video port. Its connection is modelled using the OF

graph bindings specified in Documentation/devicetree/bindings/graph.txt.

Video port 0 is for the DSI input. The remote endpoint phandle should

be a reference to a valid mipi_dsi_host device node.





Example:



&qupv3_se9_i2c {

	status = "okay";

	lt9611@3b {

		compatible = "lt,lt9611";

		reg = <0x3b>;

		interrupt-parent = <&tlmm>;

		interrupts = <125 0>;

		interrupt-names = "lt_irq";

		lt,irq-gpio = <&tlmm 125 0x0>;

		lt,reset-gpio = <&tlmm 134 0x0>;

		lt,hdmi-ps-gpio = <&tlmm 136 0x0>;

		lt,hdmi-en-gpio = <&tlmm 137 0x0>;



		vcc-supply = <&pm660l_l6>;

		vdd-supply = <&pm660_l11>;

		lt,supply-entries {

			#address-cells = <1>;

			#size-cells = <0>;



			lt,supply-entry@0 {

				reg = <0>;

				lt,supply-name = "vcc";

				lt,supply-min-voltage = <3300000>;

				lt,supply-max-voltage = <3300000>;

				lt,supply-enable-load = <200000>;

				lt,supply-post-on-sleep = <50>;

			};



			lt,supply-entry@1 {

				reg = <1>;

				lt,supply-name = "vdd";

				lt,supply-min-voltage = <1800000>;

				lt,supply-max-voltage = <1800000>;

				lt,supply-enable-load = <200000>;

				lt,supply-post-on-sleep = <50>;

			};

		};



		lt,customize-modes {

			lt,customize-mode-id@0 {

				lt,mode-h-active = <1920>;

				lt,mode-h-front-porch = <88>;

				lt,mode-h-pulse-width = <44>;

				lt,mode-h-back-porch = <148>;

				lt,mode-h-active-high;

				lt,mode-v-active = <1080>;

				lt,mode-v-front-porch = <4>;

				lt,mode-v-pulse-width = <5>;

				lt,mode-v-back-porch = <36>;

				lt,mode-v-active-high;

				lt,mode-refresh-rate = <60>;

				lt,mode-clock-in-khz = <148500>;

			};

		};



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;

				lt9611_in: endpoint {

				remote-endpoint = <&ext_dsi_out>;

				};

			};

		};

	};

};

Documentation/devicetree/bindings/vendor-prefixes.txt

+1 −0
Original line number Diff line number Diff line
@@ -161,6 +161,7 @@ lg LG Corporation 
linux	Linux-specific binding

lltc	Linear Technology Corporation

lsi	LSI Corp. (LSI Logic)

lt	Lontium Semiconductor Corporation

marvell	Marvell Technology Group Ltd.

maxim	Maxim Integrated Products

meas	Measurement Specialties

drivers/gpu/drm/bridge/Kconfig

+9 −0
Original line number Diff line number Diff line
@@ -74,6 +74,15 @@ config DRM_TOSHIBA_TC358767 
	---help---

	  Toshiba TC358767 eDP bridge chip driver.



config DRM_LT_LT9611

	bool "LT LT9611 DSI/HDMI Bridge"

	depends on OF

	select DRM_KMS_HELPER

	select REGMAP_I2C

	select DRM_MIPI_DSI

	help

	  Support for the LT Devices LT9611 DSI to HDMI encoder.



source "drivers/gpu/drm/bridge/analogix/Kconfig"



source "drivers/gpu/drm/bridge/adv7511/Kconfig"

drivers/gpu/drm/bridge/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -10,3 +10,4 @@ obj-$(CONFIG_DRM_SII902X) += sii902x.o 
obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o

obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/

obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/

obj-$(CONFIG_DRM_LT_LT9611) += lt9611.o

drivers/gpu/drm/bridge/lt9611.c

0 → 100644
+2180 −0

File added.

Preview size limit exceeded, changes collapsed.