Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d5383fcc authored by Krzysztof Helt's avatar Krzysztof Helt Committed by Linus Torvalds
Browse files

pm3fb: mtrr support and noaccel option



This patch adds usage of MTRR registers and two new options: noaccel and
nomtrr.

[bunk@kernel.org: make pm3fb_init() static again]
Signed-off-by: default avatarKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: default avatarAntonino Daplas <adaplas@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 0ddf7849
Loading
Loading
Loading
Loading
+40 −0
Original line number Diff line number Diff line
@@ -38,6 +38,9 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif

#include <video/permedia2.h>
#include <video/cvisionppc.h>
@@ -73,6 +76,11 @@ static char *mode __devinitdata = NULL;
 */
static int lowhsync;
static int lowvsync;
static int noaccel __devinitdata;
/* mtrr option */
#ifdef CONFIG_MTRR
static int nomtrr __devinitdata;
#endif

/*
 * The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_par
	u32		mem_control;	/* MemControl reg at probe */
	u32		boot_address;	/* BootAddress reg at probe */
	u32		palette[16];
	int		mtrr_handle;
};

/*
@@ -1316,6 +1325,15 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev,
		goto err_exit_mmio;
	}

#ifdef CONFIG_MTRR
	default_par->mtrr_handle = -1;
	if (!nomtrr)
		default_par->mtrr_handle =
			mtrr_add(pm2fb_fix.smem_start,
				 pm2fb_fix.smem_len,
				 MTRR_TYPE_WRCOMB, 1);
#endif

	info->fbops		= &pm2fb_ops;
	info->fix		= pm2fb_fix;
	info->pseudo_palette	= default_par->palette;
@@ -1324,6 +1342,11 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev,
				  FBINFO_HWACCEL_COPYAREA |
				  FBINFO_HWACCEL_FILLRECT;

	if (noaccel) {
	    	printk(KERN_DEBUG "disabling acceleration\n");
  		info->flags |= FBINFO_HWACCEL_DISABLED;
	}

	if (!mode)
		mode = "640x480@60";

@@ -1375,6 +1398,11 @@ static void __devexit pm2fb_remove(struct pci_dev *pdev)

	unregister_framebuffer(info);

#ifdef CONFIG_MTRR
	if (par->mtrr_handle >= 0)
		mtrr_del(par->mtrr_handle, info->fix.smem_start,
			 info->fix.smem_len);
#endif /* CONFIG_MTRR */
	iounmap(info->screen_base);
	release_mem_region(fix->smem_start, fix->smem_len);
	iounmap(par->v_regs);
@@ -1430,6 +1458,12 @@ static int __init pm2fb_setup(char *options)
			lowhsync = 1;
		} else if(!strcmp(this_opt, "lowvsync")) {
			lowvsync = 1;
#ifdef CONFIG_MTRR
		} else if (!strncmp(this_opt, "nomtrr", 6)) {
			nomtrr = 1;
#endif
		} else if (!strncmp(this_opt, "noaccel", 7)) {
			noaccel = 1;
		} else {
			mode = this_opt;
		}
@@ -1474,6 +1508,12 @@ module_param(lowhsync, bool, 0);
MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless of mode");
module_param(lowvsync, bool, 0);
MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless of mode");
module_param(noaccel, bool, 0);
MODULE_PARM_DESC(noaccel, "Disable acceleration");
#ifdef CONFIG_MTRR
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
#endif

MODULE_AUTHOR("Jim Hague <jim.hague@acm.org>");
MODULE_DESCRIPTION("Permedia2 framebuffer device driver");
+78 −2
Original line number Diff line number Diff line
@@ -32,6 +32,9 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif

#include <video/pm3fb.h>

@@ -52,6 +55,12 @@
 * Driver data
 */
static char *mode_option __devinitdata;
static int noaccel   __devinitdata = 0;

/* mtrr option */
#ifdef CONFIG_MTRR
static int nomtrr __devinitdata = 0;
#endif

/*
 * This structure defines the hardware state of the graphics card. Normally
@@ -65,6 +74,7 @@ struct pm3_par {
	u32		video;		/* video flags before blanking */
	u32		base;		/* screen base (xoffset+yoffset) in 128 bits unit */
	u32		palette[16];
	int		mtrr_handle;
};

/*
@@ -1244,6 +1254,13 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
	}
	info->screen_size = pm3fb_fix.smem_len;

#ifdef CONFIG_MTRR
	if (!nomtrr) {
		par->mtrr_handle = mtrr_add(pm3fb_fix.smem_start,
						pm3fb_fix.smem_len,
						MTRR_TYPE_WRCOMB, 1);
	}
#endif
	info->fbops = &pm3fb_ops;

	par->video = PM3_READ_REG(par, PM3VideoControl);
@@ -1257,6 +1274,10 @@ static int __devinit pm3fb_probe(struct pci_dev *dev,
			FBINFO_HWACCEL_IMAGEBLIT |
			FBINFO_HWACCEL_FILLRECT;

	if (noaccel) {
	    	printk(KERN_DEBUG "disabling acceleration\n");
  		info->flags |= FBINFO_HWACCEL_DISABLED;
	}
	info->pixmap.addr = kmalloc(PM3_PIXMAP_SIZE, GFP_KERNEL);
	if (!info->pixmap.addr) {
		retval = -ENOMEM;
@@ -1330,6 +1351,11 @@ static void __devexit pm3fb_remove(struct pci_dev *dev)
		unregister_framebuffer(info);
		fb_dealloc_cmap(&info->cmap);

#ifdef CONFIG_MTRR
	if (par->mtrr_handle >= 0)
		mtrr_del(par->mtrr_handle, info->fix.smem_start,
			 info->fix.smem_len);
#endif /* CONFIG_MTRR */
		iounmap(info->screen_base);
		release_mem_region(fix->smem_start, fix->smem_len);
		iounmap(par->v_regs);
@@ -1357,22 +1383,72 @@ static struct pci_driver pm3fb_driver = {

MODULE_DEVICE_TABLE(pci, pm3fb_id_table);

#ifndef MODULE
	/*
	 *  Setup
	 */

/*
 * Only necessary if your driver takes special options,
 * otherwise we fall back on the generic fb_setup().
 */
static int __init pm3fb_setup(char *options)
{
	char *this_opt;

	/* Parse user speficied options (`video=pm3fb:') */
	if (!options || !*options)
		return 0;

	while ((this_opt = strsep(&options, ",")) != NULL) {
		if (!*this_opt)
			continue;
		else if (!strncmp(this_opt, "noaccel", 7)) {
			noaccel = 1;
#ifdef CONFIG_MTRR
		} else if (!strncmp(this_opt, "nomtrr", 6)) {
			nomtrr = 1;
#endif
		} else {
			mode_option = this_opt;
		}
	}
	return 0;
}
#endif /* MODULE */

static int __init pm3fb_init(void)
{
	/*
	 *  For kernel boot options (in 'video=pm3fb:<options>' format)
	 */
#ifndef MODULE
	if (fb_get_options("pm3fb", NULL))
	char *option = NULL;

	if (fb_get_options("pm3fb", &option))
		return -ENODEV;
	pm3fb_setup(option);
#endif

	return pci_register_driver(&pm3fb_driver);
}

#ifdef MODULE
static void __exit pm3fb_exit(void)
{
	pci_unregister_driver(&pm3fb_driver);
}

module_init(pm3fb_init);
module_exit(pm3fb_exit);
#endif
module_init(pm3fb_init);

module_param(noaccel, bool, 0);
MODULE_PARM_DESC(noaccel, "Disable acceleration");
#ifdef CONFIG_MTRR
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
#endif

MODULE_DESCRIPTION("Permedia3 framebuffer device driver");
MODULE_LICENSE("GPL");