Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit cc0c4237 authored by Ashay Jaiswal's avatar Ashay Jaiswal
Browse files

ARM: dts: msm: update SMB1355 device node inclusion policy 



SMB1355 is an I2C based parallel chip and on different
platform it could be on different I2C bus, update the SMB1355
dt file to be independent of I2C bus.
Keep SMB1355 enabled for MTP/QRD platforms.

Change-Id: I0765cd74620d08b0795a99fa13b678d4da8c9500
Signed-off-by: default avatarAshay Jaiswal <ashayj@codeaurora.org>
parent d5546ff2

arch/arm64/boot/dts/qcom/sda450-pmi632-mtp-s3.dts

+1 −1
Original line number Diff line number Diff line
@@ -14,8 +14,8 @@ 
/dts-v1/;



#include "sda450.dtsi"

#include "sdm450-pmi632-mtp-s3.dtsi"

#include "sdm450-pmi632.dtsi"

#include "sdm450-pmi632-mtp-s3.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. SDA450 + PMI632 MTP S3";

arch/arm64/boot/dts/qcom/sda845-svr.dtsi

+4 −1
Original line number Diff line number Diff line
@@ -14,9 +14,12 @@ 
#include "sdm845-pinctrl-overlay.dtsi"

#include "sda845-svr-pinctrl-overlay.dtsi"

#include "sdm845-camera-sensor-svr.dtsi"

#include "smb1355.dtsi"

#include <dt-bindings/clock/mdss-10nm-pll-clk.h>



&qupv3_se10_i2c {

#include "smb1355.dtsi"

};



&vendor {

	bluetooth: bt_wcn3990 {

		compatible = "qca,wcn3990";

arch/arm64/boot/dts/qcom/sdm439-mtp.dtsi

+57 −0
Original line number Diff line number Diff line
@@ -215,3 +215,60 @@ 
	qcom,mdss-dsi-bl-pmic-bank-select = <0>;

	qcom,mdss-dsi-pwm-gpio = <&pm8953_gpios 8 0>;

};



&i2c_2 {

#include "smb1355.dtsi"

};



&pmi632_gpios {

	smb_en {

		smb_en_default: smb_en_default {

			pins = "gpio2";

			function = "func1";

			output-enable;

		};

	};

};



&tlmm {

	smb_int_default: smb_int_default {

		mux {

			pins = "gpio59";

			function = "gpio";

		};

		config {

			pins = "gpio59";

			drive-strength = <2>;

			bias-pull-up;

			input-enable;

		};

	};

};



&smb1355_0 {

	pinctrl-names = "default";

	pinctrl-0 = <&smb_int_default

			&smb_en_default>;

	interrupt-parent = <&tlmm>;

	interrupts = <59 IRQ_TYPE_LEVEL_LOW>;

	smb1355_charger_0: qcom,smb1355-charger@1000 {

		status ="ok";

		/delete-property/ io-channels;

		/delete-property/ io-channels-names;

		qcom,parallel-mode = <1>;

	};

};



&smb1355_1 {

	pinctrl-names = "default";

	pinctrl-0 = <&smb_int_default

			&smb_en_default>;

	interrupt-parent = <&tlmm>;

	interrupts = <59 IRQ_TYPE_LEVEL_LOW>;

	smb1355_charger_1: qcom,smb1355-charger@1000 {

		status ="ok";

		/delete-property/ io-channels;

		/delete-property/ io-channels-names;

		qcom,parallel-mode = <1>;

	};

};

arch/arm64/boot/dts/qcom/sdm439-qrd.dtsi

+57 −0
Original line number Diff line number Diff line
@@ -312,3 +312,60 @@ 
	qcom,mdss-dsi-bl-pmic-bank-select = <0>;

	qcom,mdss-dsi-pwm-gpio = <&pm8953_gpios 8 0>;

};



&i2c_2 {

#include "smb1355.dtsi"

};



&pmi632_gpios {

	smb_en {

		smb_en_default: smb_en_default {

			pins = "gpio2";

			function = "func1";

			output-enable;

		};

	};

};



&tlmm {

	smb_int_default: smb_int_default {

		mux {

			pins = "gpio59";

			function = "gpio";

		};

		config {

			pins = "gpio59";

			drive-strength = <2>;

			bias-pull-up;

			input-enable;

		};

	};

};



&smb1355_0 {

	pinctrl-names = "default";

	pinctrl-0 = <&smb_int_default

			&smb_en_default>;

	interrupt-parent = <&tlmm>;

	interrupts = <59 IRQ_TYPE_LEVEL_LOW>;

	smb1355_charger_0: qcom,smb1355-charger@1000 {

		status ="ok";

		/delete-property/ io-channels;

		/delete-property/ io-channels-names;

		qcom,parallel-mode = <1>;

	};

};



&smb1355_1 {

	pinctrl-names = "default";

	pinctrl-0 = <&smb_int_default

			&smb_en_default>;

	interrupt-parent = <&tlmm>;

	interrupts = <59 IRQ_TYPE_LEVEL_LOW>;

	smb1355_charger_1: qcom,smb1355-charger@1000 {

		status ="ok";

		/delete-property/ io-channels;

		/delete-property/ io-channels-names;

		qcom,parallel-mode = <1>;

	};

};

arch/arm64/boot/dts/qcom/sdm450-pmi632-mtp-s3.dts

+1 −1
Original line number Diff line number Diff line
@@ -14,8 +14,8 @@ 
/dts-v1/;



#include "sdm450.dtsi"

#include "sdm450-pmi632-mtp-s3.dtsi"

#include "sdm450-pmi632.dtsi"

#include "sdm450-pmi632-mtp-s3.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. SDM450 + PMI632 MTP S3";