Loading arch/arm64/boot/dts/qcom/msm8953-gpu.dtsi 0 → 100644 +269 −0 Original line number Diff line number Diff line /* Copyright (c) 2018, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ &soc { pil_gpu: qcom,kgsl-hyp { compatible = "qcom,pil-tz-generic"; qcom,pas-id = <13>; qcom,firmware-name = "a506_zap"; memory-region = <&gpu_mem>; clocks = <&clock_gcc clk_gcc_crypto_clk>, <&clock_gcc clk_gcc_crypto_ahb_clk>, <&clock_gcc clk_gcc_crypto_axi_clk>, <&clock_gcc clk_crypto_clk_src>; clock-names = "scm_core_clk", "scm_iface_clk", "scm_bus_clk", "scm_core_clk_src"; qcom,proxy-clock-names = "scm_core_clk", "scm_iface_clk", "scm_bus_clk", "scm_core_clk_src"; qcom,scm_core_clk_src-freq = <80000000>; }; msm_bus: qcom,kgsl-busmon { label = "kgsl-busmon"; compatible = "qcom,kgsl-busmon"; }; gpubw: qcom,gpubw { compatible = "qcom,devbw"; governor = "bw_vbif"; qcom,src-dst-ports = <26 512>; /* * active-only flag is used while registering the bus * governor.It helps release the bus vote when the CPU * subsystem is inactiv3 */ qcom,active-only; qcom,bw-tbl = < 0 >, /* off */ < 1611 >, /* 1. DDR:211.20 MHz BIMC: 105.60 MHz */ < 2124 >, /* 2. DDR:278.40 MHz BIMC: 139.20 MHz */ < 2929 >, /* 3. DDR:384.00 MHz BIMC: 192.00 MHz */ < 3222 >, /* 4. DDR:422.40 MHz BIMC: 211.20 MHz */ < 4248 >, /* 5. DDR:556.80 MHz BIMC: 278.40 MHz */ < 5126 >, /* 6. DDR:672.00 MHz BIMC: 336.00 MHz */ < 5859 >, /* 7. DDR:768.00 MHz BIMC: 384.00 MHz */ < 6152 >, /* 8. DDR:806.40 MHz BIMC: 403.20 MHz */ < 6445 >, /* 9. DDR:844.80 MHz BIMC: 422.40 MHz */ < 7104 >; /*10. DDR:931.20 MHz BIMC: 465.60 MHz */ }; msm_gpu: qcom,kgsl-3d0@1c00000 { label = "kgsl-3d0"; compatible = "qcom,kgsl-3d0", "qcom,kgsl-3d"; status = "ok"; reg = <0x1c00000 0x40000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <0 33 0>; interrupt-names = "kgsl_3d0_irq"; qcom,id = <0>; qcom,chipid = <0x05000600>; qcom,initial-pwrlevel = <4>; qcom,idle-timeout = <80>; //msecs qcom,deep-nap-timeout = <100>; //msecs qcom,strtstp-sleepwake; qcom,highest-bank-bit = <14>; qcom,snapshot-size = <1048576>; //bytes clocks = <&clock_gcc_gfx clk_gcc_oxili_gfx3d_clk>, <&clock_gcc_gfx clk_gcc_oxili_ahb_clk>, <&clock_gcc_gfx clk_gcc_bimc_gfx_clk>, <&clock_gcc_gfx clk_gcc_bimc_gpu_clk>, <&clock_gcc_gfx clk_gcc_oxili_timer_clk>, <&clock_gcc_gfx clk_gcc_oxili_aon_clk>; clock-names = "core_clk", "iface_clk", "mem_iface_clk", "alt_mem_iface_clk", "rbbmtimer_clk", "alwayson_clk"; /* Bus Scale Settings */ qcom,gpubw-dev = <&gpubw>; qcom,bus-control; qcom,bus-width = <16>; qcom,msm-bus,name = "grp3d"; qcom,msm-bus,num-cases = <11>; qcom,msm-bus,num-paths = <1>; qcom,msm-bus,vectors-KBps = <26 512 0 0>, /* off */ <26 512 0 1689600>, /* 1. 211.20 MHz */ <26 512 0 2227200>, /* 2. 278.40 MHz */ <26 512 0 3072000>, /* 3. 384.00 MHz */ <26 512 0 3379200>, /* 4. 422.40 MHz */ <26 512 0 4454400>, /* 5. 556.80 MHz */ <26 512 0 5376000>, /* 6. 672.00 MHz */ <26 512 0 6144000>, /* 7. 768.00 MHz */ <26 512 0 6451200>, /* 8. 806.40 MHz */ <26 512 0 6758400>, /* 9. 844.80 MHz */ <26 512 0 7449600>; /*10. 931.20 MHz */ /* GDSC regulator names */ regulator-names = "vddcx", "vdd"; /* GDSC oxili regulators */ vddcx-supply = <&gdsc_oxili_cx>; vdd-supply = <&gdsc_oxili_gx>; /* CPU latency parameter */ qcom,pm-qos-active-latency = <213>; qcom,pm-qos-wakeup-latency = <213>; /* Quirks */ qcom,gpu-quirk-two-pass-use-wfi; qcom,gpu-quirk-dp2clockgating-disable; qcom,gpu-quirk-lmloadkill-disable; /* Trace bus */ coresight-id = <67>; coresight-name = "coresight-gfx"; coresight-nr-inports = <0>; coresight-outports = <0>; coresight-child-list = <&funnel_mm>; coresight-child-ports = <6>; /* Enable context aware freq. scaling */ qcom,enable-ca-jump; /* Context aware jump busy penalty in us */ qcom,ca-busy-penalty = <12000>; /* Context aware jump target power level */ qcom,ca-target-pwrlevel = <3>; /* GPU Mempools */ qcom,gpu-mempools { #address-cells= <1>; #size-cells = <0>; compatible = "qcom,gpu-mempools"; qcom,mempool-max-pages = <32768>; /* 4K Page Pool configuration */ qcom,gpu-mempool@0 { reg = <0>; qcom,mempool-page-size = <4096>; }; /* 64K Page Pool configuration */ qcom,gpu-mempool@1 { reg = <1>; qcom,mempool-page-size = <65536>; }; }; /* Power levels */ qcom,gpu-pwrlevels { #address-cells = <1>; #size-cells = <0>; compatible = "qcom,gpu-pwrlevels"; /* TURBO */ qcom,gpu-pwrlevel@0 { reg = <0>; qcom,gpu-freq = <650000000>; qcom,bus-freq = <10>; qcom,bus-min = <10>; qcom,bus-max = <10>; }; /* NOM+ */ qcom,gpu-pwrlevel@1 { reg = <1>; qcom,gpu-freq = <560000000>; qcom,bus-freq = <10>; qcom,bus-min = <8>; qcom,bus-max = <10>; }; /* NOM */ qcom,gpu-pwrlevel@2 { reg = <2>; qcom,gpu-freq = <510000000>; qcom,bus-freq = <9>; qcom,bus-min = <6>; qcom,bus-max = <10>; }; /* SVS+ */ qcom,gpu-pwrlevel@3 { reg = <3>; qcom,gpu-freq = <400000000>; qcom,bus-freq = <7>; qcom,bus-min = <5>; qcom,bus-max = <8>; }; /* SVS */ qcom,gpu-pwrlevel@4 { reg = <4>; qcom,gpu-freq = <320000000>; qcom,bus-freq = <4>; qcom,bus-min = <2>; qcom,bus-max = <6>; }; /* Low SVS */ qcom,gpu-pwrlevel@5 { reg = <5>; qcom,gpu-freq = <216000000>; qcom,bus-freq = <1>; qcom,bus-min = <1>; qcom,bus-max = <4>; }; /* Min SVS */ qcom,gpu-pwrlevel@6 { reg = <6>; qcom,gpu-freq = <133300000>; qcom,bus-freq = <1>; qcom,bus-min = <1>; qcom,bus-max = <4>; }; /* XO */ qcom,gpu-pwrlevel@7 { reg = <7>; qcom,gpu-freq = <19200000>; qcom,bus-freq = <0>; qcom,bus-min = <0>; qcom,bus-max = <0>; }; }; }; kgsl_msm_iommu: qcom,kgsl-iommu@1c40000 { compatible = "qcom,kgsl-smmu-v2"; reg = <0x1c40000 0x10000>; qcom,protect = <0x40000 0x10000>; qcom,micro-mmu-control = <0x6000>; clocks = <&clock_gcc_gfx clk_gcc_oxili_ahb_clk>, <&clock_gcc_gfx clk_gcc_bimc_gfx_clk>; clock-names = "gpu_ahb_clk", "gcc_bimc_gfx_clk"; qcom,secure_align_mask = <0xfff>; qcom,retention; gfx3d_user: gfx3d_user { compatible = "qcom,smmu-kgsl-cb"; label = "gfx3d_user"; iommus = <&kgsl_smmu 0>; qcom,gpu-offset = <0x48000>; }; gfx3d_secure: gfx3d_secure { compatible = "qcom,smmu-kgsl-cb"; iommus = <&kgsl_smmu 2>; memory-region = <&secure_mem>; }; }; }; arch/arm64/boot/dts/qcom/msm8953.dtsi +1 −0 Original line number Diff line number Diff line Loading @@ -162,6 +162,7 @@ #include "msm8953-coresight.dtsi" #include "msm8953-ion.dtsi" #include "msm-arm-smmu-8953.dtsi" #include "msm8953-gpu.dtsi" &soc { #address-cells = <1>; Loading Loading
arch/arm64/boot/dts/qcom/msm8953-gpu.dtsi 0 → 100644 +269 −0 Original line number Diff line number Diff line /* Copyright (c) 2018, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ &soc { pil_gpu: qcom,kgsl-hyp { compatible = "qcom,pil-tz-generic"; qcom,pas-id = <13>; qcom,firmware-name = "a506_zap"; memory-region = <&gpu_mem>; clocks = <&clock_gcc clk_gcc_crypto_clk>, <&clock_gcc clk_gcc_crypto_ahb_clk>, <&clock_gcc clk_gcc_crypto_axi_clk>, <&clock_gcc clk_crypto_clk_src>; clock-names = "scm_core_clk", "scm_iface_clk", "scm_bus_clk", "scm_core_clk_src"; qcom,proxy-clock-names = "scm_core_clk", "scm_iface_clk", "scm_bus_clk", "scm_core_clk_src"; qcom,scm_core_clk_src-freq = <80000000>; }; msm_bus: qcom,kgsl-busmon { label = "kgsl-busmon"; compatible = "qcom,kgsl-busmon"; }; gpubw: qcom,gpubw { compatible = "qcom,devbw"; governor = "bw_vbif"; qcom,src-dst-ports = <26 512>; /* * active-only flag is used while registering the bus * governor.It helps release the bus vote when the CPU * subsystem is inactiv3 */ qcom,active-only; qcom,bw-tbl = < 0 >, /* off */ < 1611 >, /* 1. DDR:211.20 MHz BIMC: 105.60 MHz */ < 2124 >, /* 2. DDR:278.40 MHz BIMC: 139.20 MHz */ < 2929 >, /* 3. DDR:384.00 MHz BIMC: 192.00 MHz */ < 3222 >, /* 4. DDR:422.40 MHz BIMC: 211.20 MHz */ < 4248 >, /* 5. DDR:556.80 MHz BIMC: 278.40 MHz */ < 5126 >, /* 6. DDR:672.00 MHz BIMC: 336.00 MHz */ < 5859 >, /* 7. DDR:768.00 MHz BIMC: 384.00 MHz */ < 6152 >, /* 8. DDR:806.40 MHz BIMC: 403.20 MHz */ < 6445 >, /* 9. DDR:844.80 MHz BIMC: 422.40 MHz */ < 7104 >; /*10. DDR:931.20 MHz BIMC: 465.60 MHz */ }; msm_gpu: qcom,kgsl-3d0@1c00000 { label = "kgsl-3d0"; compatible = "qcom,kgsl-3d0", "qcom,kgsl-3d"; status = "ok"; reg = <0x1c00000 0x40000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <0 33 0>; interrupt-names = "kgsl_3d0_irq"; qcom,id = <0>; qcom,chipid = <0x05000600>; qcom,initial-pwrlevel = <4>; qcom,idle-timeout = <80>; //msecs qcom,deep-nap-timeout = <100>; //msecs qcom,strtstp-sleepwake; qcom,highest-bank-bit = <14>; qcom,snapshot-size = <1048576>; //bytes clocks = <&clock_gcc_gfx clk_gcc_oxili_gfx3d_clk>, <&clock_gcc_gfx clk_gcc_oxili_ahb_clk>, <&clock_gcc_gfx clk_gcc_bimc_gfx_clk>, <&clock_gcc_gfx clk_gcc_bimc_gpu_clk>, <&clock_gcc_gfx clk_gcc_oxili_timer_clk>, <&clock_gcc_gfx clk_gcc_oxili_aon_clk>; clock-names = "core_clk", "iface_clk", "mem_iface_clk", "alt_mem_iface_clk", "rbbmtimer_clk", "alwayson_clk"; /* Bus Scale Settings */ qcom,gpubw-dev = <&gpubw>; qcom,bus-control; qcom,bus-width = <16>; qcom,msm-bus,name = "grp3d"; qcom,msm-bus,num-cases = <11>; qcom,msm-bus,num-paths = <1>; qcom,msm-bus,vectors-KBps = <26 512 0 0>, /* off */ <26 512 0 1689600>, /* 1. 211.20 MHz */ <26 512 0 2227200>, /* 2. 278.40 MHz */ <26 512 0 3072000>, /* 3. 384.00 MHz */ <26 512 0 3379200>, /* 4. 422.40 MHz */ <26 512 0 4454400>, /* 5. 556.80 MHz */ <26 512 0 5376000>, /* 6. 672.00 MHz */ <26 512 0 6144000>, /* 7. 768.00 MHz */ <26 512 0 6451200>, /* 8. 806.40 MHz */ <26 512 0 6758400>, /* 9. 844.80 MHz */ <26 512 0 7449600>; /*10. 931.20 MHz */ /* GDSC regulator names */ regulator-names = "vddcx", "vdd"; /* GDSC oxili regulators */ vddcx-supply = <&gdsc_oxili_cx>; vdd-supply = <&gdsc_oxili_gx>; /* CPU latency parameter */ qcom,pm-qos-active-latency = <213>; qcom,pm-qos-wakeup-latency = <213>; /* Quirks */ qcom,gpu-quirk-two-pass-use-wfi; qcom,gpu-quirk-dp2clockgating-disable; qcom,gpu-quirk-lmloadkill-disable; /* Trace bus */ coresight-id = <67>; coresight-name = "coresight-gfx"; coresight-nr-inports = <0>; coresight-outports = <0>; coresight-child-list = <&funnel_mm>; coresight-child-ports = <6>; /* Enable context aware freq. scaling */ qcom,enable-ca-jump; /* Context aware jump busy penalty in us */ qcom,ca-busy-penalty = <12000>; /* Context aware jump target power level */ qcom,ca-target-pwrlevel = <3>; /* GPU Mempools */ qcom,gpu-mempools { #address-cells= <1>; #size-cells = <0>; compatible = "qcom,gpu-mempools"; qcom,mempool-max-pages = <32768>; /* 4K Page Pool configuration */ qcom,gpu-mempool@0 { reg = <0>; qcom,mempool-page-size = <4096>; }; /* 64K Page Pool configuration */ qcom,gpu-mempool@1 { reg = <1>; qcom,mempool-page-size = <65536>; }; }; /* Power levels */ qcom,gpu-pwrlevels { #address-cells = <1>; #size-cells = <0>; compatible = "qcom,gpu-pwrlevels"; /* TURBO */ qcom,gpu-pwrlevel@0 { reg = <0>; qcom,gpu-freq = <650000000>; qcom,bus-freq = <10>; qcom,bus-min = <10>; qcom,bus-max = <10>; }; /* NOM+ */ qcom,gpu-pwrlevel@1 { reg = <1>; qcom,gpu-freq = <560000000>; qcom,bus-freq = <10>; qcom,bus-min = <8>; qcom,bus-max = <10>; }; /* NOM */ qcom,gpu-pwrlevel@2 { reg = <2>; qcom,gpu-freq = <510000000>; qcom,bus-freq = <9>; qcom,bus-min = <6>; qcom,bus-max = <10>; }; /* SVS+ */ qcom,gpu-pwrlevel@3 { reg = <3>; qcom,gpu-freq = <400000000>; qcom,bus-freq = <7>; qcom,bus-min = <5>; qcom,bus-max = <8>; }; /* SVS */ qcom,gpu-pwrlevel@4 { reg = <4>; qcom,gpu-freq = <320000000>; qcom,bus-freq = <4>; qcom,bus-min = <2>; qcom,bus-max = <6>; }; /* Low SVS */ qcom,gpu-pwrlevel@5 { reg = <5>; qcom,gpu-freq = <216000000>; qcom,bus-freq = <1>; qcom,bus-min = <1>; qcom,bus-max = <4>; }; /* Min SVS */ qcom,gpu-pwrlevel@6 { reg = <6>; qcom,gpu-freq = <133300000>; qcom,bus-freq = <1>; qcom,bus-min = <1>; qcom,bus-max = <4>; }; /* XO */ qcom,gpu-pwrlevel@7 { reg = <7>; qcom,gpu-freq = <19200000>; qcom,bus-freq = <0>; qcom,bus-min = <0>; qcom,bus-max = <0>; }; }; }; kgsl_msm_iommu: qcom,kgsl-iommu@1c40000 { compatible = "qcom,kgsl-smmu-v2"; reg = <0x1c40000 0x10000>; qcom,protect = <0x40000 0x10000>; qcom,micro-mmu-control = <0x6000>; clocks = <&clock_gcc_gfx clk_gcc_oxili_ahb_clk>, <&clock_gcc_gfx clk_gcc_bimc_gfx_clk>; clock-names = "gpu_ahb_clk", "gcc_bimc_gfx_clk"; qcom,secure_align_mask = <0xfff>; qcom,retention; gfx3d_user: gfx3d_user { compatible = "qcom,smmu-kgsl-cb"; label = "gfx3d_user"; iommus = <&kgsl_smmu 0>; qcom,gpu-offset = <0x48000>; }; gfx3d_secure: gfx3d_secure { compatible = "qcom,smmu-kgsl-cb"; iommus = <&kgsl_smmu 2>; memory-region = <&secure_mem>; }; }; };
arch/arm64/boot/dts/qcom/msm8953.dtsi +1 −0 Original line number Diff line number Diff line Loading @@ -162,6 +162,7 @@ #include "msm8953-coresight.dtsi" #include "msm8953-ion.dtsi" #include "msm-arm-smmu-8953.dtsi" #include "msm8953-gpu.dtsi" &soc { #address-cells = <1>; Loading