Merge "ARM: dts: msm: add PM8937, PMI8937 and PMI8940 PMIC peripheral devices" (c9ebe917) · Commits · e / devices / android_kernel_fairphone_FP3

arch/arm64/boot/dts/qcom/pm8937.dtsi

0 → 100644

+383 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&spmi_bus {

		qcom,pm8937@0 {
		spmi-slave-container;
		reg = <0x0>;
		#address-cells = <1>;
		#size-cells = <1>;

		pm8937_revid: qcom,revid@100 {
		compatible = "qcom,qpnp-revid";
		reg = <0x100 0x100>;
		};

		qcom,power-on@800 {
		compatible = "qcom,qpnp-power-on";
		reg = <0x800 0x100>;
		interrupts = <0x0 0x8 0x0>,
		<0x0 0x8 0x1>,
		<0x0 0x8 0x4>,
		<0x0 0x8 0x5>;
		interrupt-names = "kpdpwr", "resin",
		"resin-bark", "kpdpwr-resin-bark";
		qcom,pon-dbc-delay = <15625>;
		qcom,system-reset;

		qcom,pon_1 {
		qcom,pon-type = <0>;
		qcom,pull-up = <1>;
		linux,code = <116>;
		};

		qcom,pon_2 {
		qcom,pon-type = <1>;
		qcom,pull-up = <1>;
		linux,code = <114>;
		};
		};

		pm8937_temp_alarm: qcom,temp-alarm@2400 {
		compatible = "qcom,qpnp-temp-alarm";
		reg = <0x2400 0x100>;
		interrupts = <0x0 0x24 0x0>;
		label = "pm8937_tz";
		qcom,channel-num = <8>;
		qcom,threshold-set = <0>;
		qcom,temp_alarm-vadc = <&pm8937_vadc>;
		};

		pm8937_coincell: qcom,coincell@2800 {
		compatible = "qcom,qpnp-coincell";
		reg = <0x2800 0x100>;
		};

		pm8937_rtc: qcom,pm8937_rtc {
		spmi-dev-container;
		compatible = "qcom,qpnp-rtc";
		#address-cells = <1>;
		#size-cells = <1>;
		qcom,qpnp-rtc-write = <0>;
		qcom,qpnp-rtc-alarm-pwrup = <0>;

		qcom,pm8937_rtc_rw@6000 {
		reg = <0x6000 0x100>;
		};

		qcom,pm8937_rtc_alarm@6100 {
		reg = <0x6100 0x100>;
		interrupts = <0x0 0x61 0x1>;
		};
		};

		pm8937_mpps: mpps {
		compatible = "qcom,qpnp-pin";
		spmi-dev-container;
		gpio-controller;
		#gpio-cells = <2>;
		#address-cells = <1>;
		#size-cells = <1>;
		label = "pm8937-mpp";

		mpp@a000 {
		reg = <0xa000 0x100>;
		qcom,pin-num = <1>;
		status = "disabled";
		};

		mpp@a100 {
		/* MPP2 - PA_THERM config */
		reg = <0xa100 0x100>;
		qcom,pin-num = <2>;
		qcom,mode = <4>; /* AIN input */
		qcom,invert = <1>; /* Enable MPP */
		qcom,ain-route = <1>; /* AMUX 6 */
		qcom,master-en = <1>;
		qcom,src-sel = <0>; /* Function constant */
		};

		mpp@a200 {
		reg = <0xa200 0x100>;
		qcom,pin-num = <3>;
		status = "disabled";
		};

		mpp@a300 {
		/* MPP4 - CASE_THERM config */
		reg = <0xa300 0x100>;
		qcom,pin-num = <4>;
		qcom,mode = <4>; /* AIN input */
		qcom,invert = <1>; /* Enable MPP */
		qcom,ain-route = <3>; /* AMUX 8 */
		qcom,master-en = <1>;
		qcom,src-sel = <0>; /* Function constant */
		};
		};

		pm8937_gpios: gpios {
		spmi-dev-container;
		compatible = "qcom,qpnp-pin";
		gpio-controller;
		#gpio-cells = <2>;
		#address-cells = <1>;
		#size-cells = <1>;
		label = "pm8937-gpio";

		gpio@c000 {
		reg = <0xc000 0x100>;
		qcom,pin-num = <1>;
		status = "disabled";
		};

		gpio@c100 {
		reg = <0xc100 0x100>;
		qcom,pin-num = <2>;
		status = "disabled";
		};

		gpio@c200 {
		reg = <0xc200 0x100>;
		qcom,pin-num = <3>;
		status = "disabled";
		};

		gpio@c300 {
		reg = <0xc300 0x100>;
		qcom,pin-num = <4>;
		status = "disabled";
		};

		gpio@c400 {
		reg = <0xc400 0x100>;
		qcom,pin-num = <5>;
		status = "disabled";
		};

		gpio@c500 {
		reg = <0xc500 0x100>;
		qcom,pin-num = <6>;
		status = "disabled";
		};

		gpio@c600 {
		reg = <0xc600 0x100>;
		qcom,pin-num = <7>;
		status = "disabled";
		};

		gpio@c700 {
		reg = <0xc700 0x100>;
		qcom,pin-num = <8>;
		status = "disabled";
		};
		};

		pm8937_vadc: vadc@3100 {
		compatible = "qcom,qpnp-vadc";
		reg = <0x3100 0x100>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <0x0 0x31 0x0>;
		interrupt-names = "eoc-int-en-set";
		qcom,adc-bit-resolution = <15>;
		qcom,adc-vdd-reference = <1800>;
		qcom,vadc-poll-eoc;

		chan@5 {
		label = "vcoin";
		reg = <5>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@7 {
		label = "vph_pwr";
		reg = <7>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@8 {
		label = "die_temp";
		reg = <8>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <3>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@9 {
		label = "ref_625mv";
		reg = <9>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@a {
		label = "ref_1250v";
		reg = <0xa>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@c {
		label = "ref_buf_625mv";
		reg = <0xc>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@36 {
		label = "pa_therm0";
		reg = <0x36>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		};

		chan@11 {
		label = "pa_therm1";
		reg = <0x11>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,vadc-thermal-node;
		};

		chan@32 {
		label = "xo_therm";
		reg = <0x32>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <4>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,vadc-thermal-node;
		};

		chan@3c {
		label = "xo_therm_buf";
		reg = <0x3c>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <4>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,vadc-thermal-node;
		};

		chan@13 {
		label = "case_therm";
		reg = <0x13>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,vadc-thermal-node;
		};
		};

		pm8937_adc_tm: vadc@3400 {
		compatible = "qcom,qpnp-adc-tm";
		reg = <0x3400 0x100>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <0x0 0x34 0x0>,
		<0x0 0x34 0x3>,
		<0x0 0x34 0x4>;
		interrupt-names = "eoc-int-en-set",
		"high-thr-en-set",
		"low-thr-en-set";
		qcom,adc-bit-resolution = <15>;
		qcom,adc-vdd-reference = <1800>;
		qcom,adc_tm-vadc = <&pm8937_vadc>;

		chan@36 {
		label = "pa_therm0";
		reg = <0x36>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x48>;
		qcom,thermal-node;
		};

		chan@7 {
		label = "vph_pwr";
		reg = <0x7>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x68>;
		};
		};

		};

		pm8937_1: qcom,pm8937@1 {
		spmi-slave-container;
		reg = <0x1>;
		#address-cells = <1>;
		#size-cells = <1>;

		pm8937_pwm: pwm@bc00 {
		status = "disabled";
		compatible = "qcom,qpnp-pwm";
		reg = <0xbc00 0x100>;
		reg-names = "qpnp-lpg-channel-base";
		qcom,channel-id = <0>;
		qcom,supported-sizes = <6>, <9>;
		#pwm-cells = <2>;
		};
		};
		};

arch/arm64/boot/dts/qcom/pmi8937.dtsi

0 → 100644

+540 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		#include <dt-bindings/msm/power-on.h>

		&spmi_bus {

		qcom,pmi8937@2 {
		spmi-slave-container;
		reg = <0x2>;
		#address-cells = <1>;
		#size-cells = <1>;

		pmi8937_revid: qcom,revid@100 {
		compatible = "qcom,qpnp-revid";
		reg = <0x100 0x100>;
		};

		qcom,power-on@800 {
		compatible = "qcom,qpnp-power-on";
		reg = <0x800 0x100>;
		qcom,secondary-pon-reset;
		qcom,hard-reset-poweroff-type =
		<PON_POWER_OFF_SHUTDOWN>;

		pon_perph_reg: qcom,pon_perph_reg {
		regulator-name = "pon_spare_reg";
		qcom,pon-spare-reg-addr = <0x8c>;
		qcom,pon-spare-reg-bit = <1>;
		};
		};

		pmi8937_vadc: vadc@3100 {
		compatible = "qcom,qpnp-vadc";
		reg = <0x3100 0x100>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <0x2 0x31 0x0>;
		interrupt-names = "eoc-int-en-set";
		qcom,adc-bit-resolution = <15>;
		qcom,adc-vdd-reference = <1800>;
		qcom,vadc-poll-eoc;

		chan@0 {
		label = "usbin";
		reg = <0>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <4>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@1 {
		label = "dcin";
		reg = <1>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <4>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@3 {
		label = "vchg_sns";
		reg = <3>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@9 {
		label = "ref_625mv";
		reg = <9>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@a {
		label = "ref_1250v";
		reg = <0xa>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@d {
		label = "chg_temp";
		reg = <0xd>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <16>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@43 {
		label = "usb_dp";
		reg = <0x43>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@44 {
		label = "usb_dm";
		reg = <0x44>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};
		};

		pmi8937_mpps: mpps {
		spmi-dev-container;
		compatible = "qcom,qpnp-pin";
		gpio-controller;
		#gpio-cells = <2>;
		#address-cells = <1>;
		#size-cells = <1>;
		label = "pmi8937-mpp";

		mpp@a000 {
		reg = <0xa000 0x100>;
		qcom,pin-num = <1>;
		status = "disabled";
		};

		mpp@a100 {
		reg = <0xa100 0x100>;
		qcom,pin-num = <2>;
		status = "disabled";
		};

		mpp@a300 {
		reg = <0xa300 0x100>;
		qcom,pin-num = <4>;
		status = "disabled";
		};
		};

		pmi8937_charger: qcom,qpnp-smbcharger {
		spmi-dev-container;
		compatible = "qcom,qpnp-smbcharger";
		#address-cells = <1>;
		#size-cells = <1>;

		qcom,iterm-ma = <100>;
		qcom,float-voltage-mv = <4200>;
		qcom,resume-delta-mv = <200>;
		qcom,chg-inhibit-fg;
		qcom,rparasitic-uohm = <100000>;
		qcom,bms-psy-name = "bms";
		qcom,thermal-mitigation = <1500 700 600 0>;
		qcom,parallel-usb-min-current-ma = <1400>;
		qcom,parallel-usb-9v-min-current-ma = <900>;
		qcom,parallel-allowed-lowering-ma = <500>;
		qcom,pmic-revid = <&pmi8937_revid>;
		qcom,force-aicl-rerun;
		qcom,aicl-rerun-period-s = <180>;
		qcom,autoadjust-vfloat;

		qcom,chgr@1000 {
		reg = <0x1000 0x100>;
		interrupts = <0x2 0x10 0x0>,
		<0x2 0x10 0x1>,
		<0x2 0x10 0x2>,
		<0x2 0x10 0x3>,
		<0x2 0x10 0x4>,
		<0x2 0x10 0x5>,
		<0x2 0x10 0x6>,
		<0x2 0x10 0x7>;

		interrupt-names = "chg-error",
		"chg-inhibit",
		"chg-prechg-sft",
		"chg-complete-chg-sft",
		"chg-p2f-thr",
		"chg-rechg-thr",
		"chg-taper-thr",
		"chg-tcc-thr";
		};

		qcom,otg@1100 {
		reg = <0x1100 0x100>;
		interrupts = <0x2 0x11 0x0>,
		<0x2 0x11 0x1>,
		<0x2 0x11 0x3>;
		interrupt-names = "otg-fail",
		"otg-oc",
		"usbid-change";
		};

		qcom,bat-if@1200 {
		reg = <0x1200 0x100>;
		interrupts = <0x2 0x12 0x0>,
		<0x2 0x12 0x1>,
		<0x2 0x12 0x2>,
		<0x2 0x12 0x3>,
		<0x2 0x12 0x4>,
		<0x2 0x12 0x5>,
		<0x2 0x12 0x6>,
		<0x2 0x12 0x7>;

		interrupt-names = "batt-hot",
		"batt-warm",
		"batt-cold",
		"batt-cool",
		"batt-ov",
		"batt-low",
		"batt-missing",
		"batt-term-missing";
		};

		qcom,usb-chgpth@1300 {
		reg = <0x1300 0x100>;
		interrupts = <0x2 0x13 0x0>,
		<0x2 0x13 0x1>,
		<0x2 0x13 0x2>,
		<0x2 0x13 0x5>;

		interrupt-names = "usbin-uv",
		"usbin-ov",
		"usbin-src-det",
		"aicl-done";
		};

		qcom,dc-chgpth@1400 {
		reg = <0x1400 0x100>;
		interrupts = <0x2 0x14 0x0>,
		<0x2 0x14 0x1>;
		interrupt-names = "dcin-uv",
		"dcin-ov";
		};

		qcom,chgr-misc@1600 {
		reg = <0x1600 0x100>;
		interrupts = <0x2 0x16 0x0>,
		<0x2 0x16 0x1>,
		<0x2 0x16 0x2>,
		<0x2 0x16 0x3>,
		<0x2 0x16 0x4>,
		<0x2 0x16 0x5>;

		interrupt-names = "power-ok",
		"temp-shutdown",
		"wdog-timeout",
		"flash-fail",
		"otst2",
		"otst3";
		};

		smbcharger_charger_otg: qcom,smbcharger-boost-otg {
		regulator-name = "smbcharger_charger_otg";
		};
		};

		pmi8937_fg: qcom,fg {
		spmi-dev-container;
		compatible = "qcom,qpnp-fg";
		#address-cells = <1>;
		#size-cells = <1>;
		qcom,resume-soc = <95>;
		status = "okay";
		qcom,bcl-lm-threshold-ma = <127>;
		qcom,bcl-mh-threshold-ma = <405>;
		qcom,fg-iterm-ma = <150>;
		qcom,fg-chg-iterm-ma = <100>;
		qcom,pmic-revid = <&pmi8937_revid>;
		qcom,fg-cutoff-voltage-mv = <3500>;
		qcom,cycle-counter-en;
		qcom,capacity-learning-on;

		qcom,fg-soc@4000 {
		status = "okay";
		reg = <0x4000 0x100>;
		interrupts = <0x2 0x40 0x0>,
		<0x2 0x40 0x1>,
		<0x2 0x40 0x2>,
		<0x2 0x40 0x3>,
		<0x2 0x40 0x4>,
		<0x2 0x40 0x5>,
		<0x2 0x40 0x6>;

		interrupt-names = "high-soc",
		"low-soc",
		"full-soc",
		"empty-soc",
		"delta-soc",
		"first-est-done",
		"update-soc";
		};

		qcom,fg-batt@4100 {
		reg = <0x4100 0x100>;
		interrupts = <0x2 0x41 0x0>,
		<0x2 0x41 0x1>,
		<0x2 0x41 0x2>,
		<0x2 0x41 0x3>,
		<0x2 0x41 0x4>,
		<0x2 0x41 0x5>,
		<0x2 0x41 0x6>,
		<0x2 0x41 0x7>;

		interrupt-names = "soft-cold",
		"soft-hot",
		"vbatt-low",
		"batt-ided",
		"batt-id-req",
		"batt-unknown",
		"batt-missing",
		"batt-match";
		};

		qcom,revid-tp-rev@1f1 {
		reg = <0x1f1 0x1>;
		};

		qcom,fg-memif@4400 {
		status = "okay";
		reg = <0x4400 0x100>;
		interrupts = <0x2 0x44 0x0>,
		<0x2 0x44 0x2>;

		interrupt-names = "mem-avail",
		"data-rcvry-sug";
		};
		};

		bcl@4200 {
		compatible = "qcom,msm-bcl";
		reg = <0x4200 0xff>;
		reg-names = "fg_user_adc";
		interrupts = <0x2 0x42 0x0>,
		<0x2 0x42 0x1>;
		interrupt-names = "bcl-high-ibat-int",
		"bcl-low-vbat-int";
		qcom,vbat-scaling-factor = <39000>;
		qcom,vbat-gain-numerator = <1>;
		qcom,vbat-gain-denominator = <128>;
		qcom,vbat-polling-delay-ms = <100>;
		qcom,ibat-scaling-factor = <39000>;
		qcom,ibat-gain-numerator = <1>;
		qcom,ibat-gain-denominator = <128>;
		qcom,ibat-offset-numerator = <1200>;
		qcom,ibat-offset-denominator = <1>;
		qcom,ibat-polling-delay-ms = <100>;
		};

		qcom,leds@a100 {
		compatible = "qcom,leds-qpnp";
		reg = <0xa100 0x100>;
		label = "mpp";
		};
		};

		qcom,pmi8937@3 {
		spmi-slave-container;
		reg = <0x3>;
		#address-cells = <1>;
		#size-cells = <1>;

		pmi8937_pwm: pwm@b000 {
		status = "disabled";
		compatible = "qcom,qpnp-pwm";
		reg = <0xb000 0x100>;
		reg-names = "qpnp-lpg-channel-base";
		qcom,channel-id = <0>;
		qcom,supported-sizes = <6>, <9>;
		#pwm-cells = <2>;
		};

		wled: qcom,leds@d800 {
		compatible = "qcom,qpnp-wled";
		reg = <0xd800 0x100>,
		<0xd900 0x100>;
		reg-names = "qpnp-wled-ctrl-base",
		"qpnp-wled-sink-base";
		interrupts = <0x3 0xd8 0x2>;
		interrupt-names = "sc-irq";
		status = "okay";
		linux,name = "wled";
		linux,default-trigger = "bkl-trigger";
		qcom,fdbk-output = "auto";
		qcom,vref-mv = <350>;
		qcom,switch-freq-khz = <800>;
		qcom,ovp-mv = <29500>;
		qcom,ilim-ma = <980>;
		qcom,boost-duty-ns = <26>;
		qcom,mod-freq-khz = <9600>;
		qcom,dim-mode = "hybrid";
		qcom,dim-method = "linear";
		qcom,hyb-thres = <625>;
		qcom,sync-dly-us = <800>;
		qcom,fs-curr-ua = <20000>;
		qcom,led-strings-list = [00 01];
		qcom,en-ext-pfet-sc-pro;
		qcom,cons-sync-write-delay-us = <1000>;
		};

		flash_led: qcom,leds@d300 {
		compatible = "qcom,qpnp-flash-led";
		status = "okay";
		reg = <0xd300 0x100>;
		label = "flash";
		qcom,headroom = <500>;
		qcom,startup-dly = <128>;
		qcom,clamp-curr = <200>;
		qcom,pmic-charger-support;
		qcom,self-check-enabled;
		qcom,thermal-derate-enabled;
		qcom,thermal-derate-threshold = <100>;
		qcom,thermal-derate-rate = "5_PERCENT";
		qcom,current-ramp-enabled;
		qcom,ramp_up_step = "6P7_US";
		qcom,ramp_dn_step = "6P7_US";
		qcom,vph-pwr-droop-enabled;
		qcom,vph-pwr-droop-threshold = <3000>;
		qcom,vph-pwr-droop-debounce-time = <10>;
		qcom,headroom-sense-ch0-enabled;
		qcom,headroom-sense-ch1-enabled;
		qcom,pmic-revid = <&pmi8937_revid>;

		pmi8937_flash0: qcom,flash_0 {
		label = "flash";
		qcom,led-name = "led:flash_0";
		qcom,default-led-trigger =
		"flash0_trigger";
		qcom,max-current = <1000>;
		qcom,duration = <1280>;
		qcom,id = <0>;
		qcom,current = <625>;
		};

		pmi8937_flash1: qcom,flash_1 {
		label = "flash";
		qcom,led-name = "led:flash_1";
		qcom,default-led-trigger =
		"flash1_trigger";
		qcom,max-current = <1000>;
		qcom,duration = <1280>;
		qcom,id = <1>;
		qcom,current = <625>;
		};

		pmi8937_torch0: qcom,torch_0 {
		label = "torch";
		qcom,led-name = "led:torch_0";
		qcom,default-led-trigger =
		"torch0_trigger";
		qcom,max-current = <200>;
		qcom,id = <0>;
		qcom,current = <120>;
		};

		pmi8937_torch1: qcom,torch_1 {
		label = "torch";
		qcom,led-name = "led:torch_1";
		qcom,default-led-trigger =
		"torch1_trigger";
		qcom,max-current = <200>;
		qcom,id = <1>;
		qcom,current = <120>;
		};

		pmi8937_switch: qcom,switch {
		label = "switch";
		qcom,led-name = "led:switch";
		qcom,default-led-trigger =
		"switch_trigger";
		qcom,max-current = <1000>;
		qcom,duration = <1280>;
		qcom,id = <2>;
		qcom,current = <625>;
		reg0 {
		regulator-name = "pon_spare_reg";
		};
		};
		};

		pmi_haptic: qcom,haptic@c000 {
		compatible = "qcom,qpnp-haptic";
		reg = <0xc000 0x100>;
		interrupts = <0x3 0xc0 0x0>,
		<0x3 0xc0 0x1>;
		interrupt-names = "sc-irq", "play-irq";
		qcom,pmic-revid = <&pmi8937_revid>;
		vcc_pon-supply = <&pon_perph_reg>;
		qcom,play-mode = "direct";
		qcom,wave-play-rate-us = <5263>;
		qcom,actuator-type = "lra";
		qcom,wave-shape = "square";
		qcom,vmax-mv = <2000>;
		qcom,ilim-ma = <800>;
		qcom,sc-deb-cycles = <8>;
		qcom,int-pwm-freq-khz = <505>;
		qcom,en-brake;
		qcom,brake-pattern = [03 03 00 00];
		qcom,use-play-irq;
		qcom,use-sc-irq;
		qcom,wave-samples = [3e 3e 3e 3e 3e 3e 3e 3e];
		qcom,wave-rep-cnt = <1>;
		qcom,wave-samp-rep-cnt = <1>;
		qcom,lra-auto-res-mode="qwd";
		qcom,lra-high-z="opt1";
		qcom,lra-res-cal-period = <4>;
		qcom,correct-lra-drive-freq;
		qcom,misc-trim-error-rc19p2-clk-reg-present;
		};
		};
		};

arch/arm64/boot/dts/qcom/pmi8940.dtsi

0 → 100644

+611 −0

File added.

Preview size limit exceeded, changes collapsed.