Loading Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt 0 → 100644 +35 −0 Original line number Diff line number Diff line STMicroelectronics STi System Configuration Controlled IRQs ----------------------------------------------------------- On STi based systems; External, CTI (Core Sight), PMU (Performance Management), and PL310 L2 Cache IRQs are controlled using System Configuration registers. This driver is used to unmask them prior to use. Required properties: - compatible : Should be set to one of: "st,stih415-irq-syscfg" "st,stih416-irq-syscfg" "st,stih407-irq-syscfg" "st,stid127-irq-syscfg" - st,syscfg : Phandle to Cortex-A9 IRQ system config registers - st,irq-device : Array of IRQs to enable - should be 2 in length - st,fiq-device : Array of FIQs to enable - should be 2 in length Optional properties: - st,invert-ext : External IRQs can be inverted at will. This property inverts these IRQs using bitwise logic. A number of defines have been provided for convenience: ST_IRQ_SYSCFG_EXT_1_INV ST_IRQ_SYSCFG_EXT_2_INV ST_IRQ_SYSCFG_EXT_3_INV Example: irq-syscfg { compatible = "st,stih416-irq-syscfg"; st,syscfg = <&syscfg_cpu>; st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, <ST_IRQ_SYSCFG_PMU_1>; st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, <ST_IRQ_SYSCFG_DISABLED>; st,invert-ext = <(ST_IRQ_SYSCFG_EXT_1_INV | ST_IRQ_SYSCFG_EXT_3_INV)>; }; drivers/irqchip/Kconfig +7 −0 Original line number Diff line number Diff line Loading @@ -110,6 +110,13 @@ config RENESAS_IRQC bool select IRQ_DOMAIN config ST_IRQCHIP bool select REGMAP select MFD_SYSCON help Enables SysCfg Controlled IRQs on STi based platforms. config TB10X_IRQC bool select IRQ_DOMAIN Loading drivers/irqchip/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -33,6 +33,7 @@ obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o obj-$(CONFIG_ST_IRQCHIP) += irq-st.o obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o Loading drivers/irqchip/irq-st.c 0 → 100644 +206 −0 Original line number Diff line number Diff line /* * Copyright (C) 2014 STMicroelectronics – All Rights Reserved * * Author: Lee Jones <lee.jones@linaro.org> * * This is a re-write of Christophe Kerello's PMU driver. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include <dt-bindings/interrupt-controller/irq-st.h> #include <linux/err.h> #include <linux/mfd/syscon.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> #define STIH415_SYSCFG_642 0x0a8 #define STIH416_SYSCFG_7543 0x87c #define STIH407_SYSCFG_5102 0x198 #define STID127_SYSCFG_734 0x088 #define ST_A9_IRQ_MASK 0x001FFFFF #define ST_A9_IRQ_MAX_CHANS 2 #define ST_A9_IRQ_EN_CTI_0 BIT(0) #define ST_A9_IRQ_EN_CTI_1 BIT(1) #define ST_A9_IRQ_EN_PMU_0 BIT(2) #define ST_A9_IRQ_EN_PMU_1 BIT(3) #define ST_A9_IRQ_EN_PL310_L2 BIT(4) #define ST_A9_IRQ_EN_EXT_0 BIT(5) #define ST_A9_IRQ_EN_EXT_1 BIT(6) #define ST_A9_IRQ_EN_EXT_2 BIT(7) #define ST_A9_FIQ_N_SEL(dev, chan) (dev << (8 + (chan * 3))) #define ST_A9_IRQ_N_SEL(dev, chan) (dev << (14 + (chan * 3))) #define ST_A9_EXTIRQ_INV_SEL(dev) (dev << 20) struct st_irq_syscfg { struct regmap *regmap; unsigned int syscfg; unsigned int config; bool ext_inverted; }; static const struct of_device_id st_irq_syscfg_match[] = { { .compatible = "st,stih415-irq-syscfg", .data = (void *)STIH415_SYSCFG_642, }, { .compatible = "st,stih416-irq-syscfg", .data = (void *)STIH416_SYSCFG_7543, }, { .compatible = "st,stih407-irq-syscfg", .data = (void *)STIH407_SYSCFG_5102, }, { .compatible = "st,stid127-irq-syscfg", .data = (void *)STID127_SYSCFG_734, }, {} }; static int st_irq_xlate(struct platform_device *pdev, int device, int channel, bool irq) { struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev); /* Set the device enable bit. */ switch (device) { case ST_IRQ_SYSCFG_EXT_0: ddata->config |= ST_A9_IRQ_EN_EXT_0; break; case ST_IRQ_SYSCFG_EXT_1: ddata->config |= ST_A9_IRQ_EN_EXT_1; break; case ST_IRQ_SYSCFG_EXT_2: ddata->config |= ST_A9_IRQ_EN_EXT_2; break; case ST_IRQ_SYSCFG_CTI_0: ddata->config |= ST_A9_IRQ_EN_CTI_0; break; case ST_IRQ_SYSCFG_CTI_1: ddata->config |= ST_A9_IRQ_EN_CTI_1; break; case ST_IRQ_SYSCFG_PMU_0: ddata->config |= ST_A9_IRQ_EN_PMU_0; break; case ST_IRQ_SYSCFG_PMU_1: ddata->config |= ST_A9_IRQ_EN_PMU_1; break; case ST_IRQ_SYSCFG_pl310_L2: ddata->config |= ST_A9_IRQ_EN_PL310_L2; break; case ST_IRQ_SYSCFG_DISABLED: return 0; default: dev_err(&pdev->dev, "Unrecognised device %d\n", device); return -EINVAL; } /* Select IRQ/FIQ channel for device. */ ddata->config |= irq ? ST_A9_IRQ_N_SEL(device, channel) : ST_A9_FIQ_N_SEL(device, channel); return 0; } static int st_irq_syscfg_enable(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev); int channels, ret, i; u32 device, invert; channels = of_property_count_u32_elems(np, "st,irq-device"); if (channels != ST_A9_IRQ_MAX_CHANS) { dev_err(&pdev->dev, "st,enable-irq-device must have 2 elems\n"); return -EINVAL; } channels = of_property_count_u32_elems(np, "st,fiq-device"); if (channels != ST_A9_IRQ_MAX_CHANS) { dev_err(&pdev->dev, "st,enable-fiq-device must have 2 elems\n"); return -EINVAL; } for (i = 0; i < ST_A9_IRQ_MAX_CHANS; i++) { of_property_read_u32_index(np, "st,irq-device", i, &device); ret = st_irq_xlate(pdev, device, i, true); if (ret) return ret; of_property_read_u32_index(np, "st,fiq-device", i, &device); ret = st_irq_xlate(pdev, device, i, false); if (ret) return ret; } /* External IRQs may be inverted. */ of_property_read_u32(np, "st,invert-ext", &invert); ddata->config |= ST_A9_EXTIRQ_INV_SEL(invert); return regmap_update_bits(ddata->regmap, ddata->syscfg, ST_A9_IRQ_MASK, ddata->config); } static int st_irq_syscfg_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; struct st_irq_syscfg *ddata; ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); if (!ddata) return -ENOMEM; match = of_match_device(st_irq_syscfg_match, &pdev->dev); if (!match) return -ENODEV; ddata->syscfg = (unsigned int)match->data; ddata->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); if (IS_ERR(ddata->regmap)) { dev_err(&pdev->dev, "syscfg phandle missing\n"); return PTR_ERR(ddata->regmap); } dev_set_drvdata(&pdev->dev, ddata); return st_irq_syscfg_enable(pdev); } static int st_irq_syscfg_resume(struct device *dev) { struct st_irq_syscfg *ddata = dev_get_drvdata(dev); return regmap_update_bits(ddata->regmap, ddata->syscfg, ST_A9_IRQ_MASK, ddata->config); } static SIMPLE_DEV_PM_OPS(st_irq_syscfg_pm_ops, NULL, st_irq_syscfg_resume); static struct platform_driver st_irq_syscfg_driver = { .driver = { .name = "st_irq_syscfg", .pm = &st_irq_syscfg_pm_ops, .of_match_table = st_irq_syscfg_match, }, .probe = st_irq_syscfg_probe, }; static int __init st_irq_syscfg_init(void) { return platform_driver_register(&st_irq_syscfg_driver); } core_initcall(st_irq_syscfg_init); include/dt-bindings/interrupt-controller/irq-st.h 0 → 100644 +30 −0 Original line number Diff line number Diff line /* * include/linux/irqchip/irq-st.h * * Copyright (C) 2014 STMicroelectronics – All Rights Reserved * * Author: Lee Jones <lee.jones@linaro.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H #define _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H #define ST_IRQ_SYSCFG_EXT_0 0 #define ST_IRQ_SYSCFG_EXT_1 1 #define ST_IRQ_SYSCFG_EXT_2 2 #define ST_IRQ_SYSCFG_CTI_0 3 #define ST_IRQ_SYSCFG_CTI_1 4 #define ST_IRQ_SYSCFG_PMU_0 5 #define ST_IRQ_SYSCFG_PMU_1 6 #define ST_IRQ_SYSCFG_pl310_L2 7 #define ST_IRQ_SYSCFG_DISABLED 0xFFFFFFFF #define ST_IRQ_SYSCFG_EXT_1_INV 0x1 #define ST_IRQ_SYSCFG_EXT_2_INV 0x2 #define ST_IRQ_SYSCFG_EXT_3_INV 0x4 #endif Loading
Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt 0 → 100644 +35 −0 Original line number Diff line number Diff line STMicroelectronics STi System Configuration Controlled IRQs ----------------------------------------------------------- On STi based systems; External, CTI (Core Sight), PMU (Performance Management), and PL310 L2 Cache IRQs are controlled using System Configuration registers. This driver is used to unmask them prior to use. Required properties: - compatible : Should be set to one of: "st,stih415-irq-syscfg" "st,stih416-irq-syscfg" "st,stih407-irq-syscfg" "st,stid127-irq-syscfg" - st,syscfg : Phandle to Cortex-A9 IRQ system config registers - st,irq-device : Array of IRQs to enable - should be 2 in length - st,fiq-device : Array of FIQs to enable - should be 2 in length Optional properties: - st,invert-ext : External IRQs can be inverted at will. This property inverts these IRQs using bitwise logic. A number of defines have been provided for convenience: ST_IRQ_SYSCFG_EXT_1_INV ST_IRQ_SYSCFG_EXT_2_INV ST_IRQ_SYSCFG_EXT_3_INV Example: irq-syscfg { compatible = "st,stih416-irq-syscfg"; st,syscfg = <&syscfg_cpu>; st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, <ST_IRQ_SYSCFG_PMU_1>; st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, <ST_IRQ_SYSCFG_DISABLED>; st,invert-ext = <(ST_IRQ_SYSCFG_EXT_1_INV | ST_IRQ_SYSCFG_EXT_3_INV)>; };
drivers/irqchip/Kconfig +7 −0 Original line number Diff line number Diff line Loading @@ -110,6 +110,13 @@ config RENESAS_IRQC bool select IRQ_DOMAIN config ST_IRQCHIP bool select REGMAP select MFD_SYSCON help Enables SysCfg Controlled IRQs on STi based platforms. config TB10X_IRQC bool select IRQ_DOMAIN Loading
drivers/irqchip/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -33,6 +33,7 @@ obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o obj-$(CONFIG_ST_IRQCHIP) += irq-st.o obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o Loading
drivers/irqchip/irq-st.c 0 → 100644 +206 −0 Original line number Diff line number Diff line /* * Copyright (C) 2014 STMicroelectronics – All Rights Reserved * * Author: Lee Jones <lee.jones@linaro.org> * * This is a re-write of Christophe Kerello's PMU driver. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include <dt-bindings/interrupt-controller/irq-st.h> #include <linux/err.h> #include <linux/mfd/syscon.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> #define STIH415_SYSCFG_642 0x0a8 #define STIH416_SYSCFG_7543 0x87c #define STIH407_SYSCFG_5102 0x198 #define STID127_SYSCFG_734 0x088 #define ST_A9_IRQ_MASK 0x001FFFFF #define ST_A9_IRQ_MAX_CHANS 2 #define ST_A9_IRQ_EN_CTI_0 BIT(0) #define ST_A9_IRQ_EN_CTI_1 BIT(1) #define ST_A9_IRQ_EN_PMU_0 BIT(2) #define ST_A9_IRQ_EN_PMU_1 BIT(3) #define ST_A9_IRQ_EN_PL310_L2 BIT(4) #define ST_A9_IRQ_EN_EXT_0 BIT(5) #define ST_A9_IRQ_EN_EXT_1 BIT(6) #define ST_A9_IRQ_EN_EXT_2 BIT(7) #define ST_A9_FIQ_N_SEL(dev, chan) (dev << (8 + (chan * 3))) #define ST_A9_IRQ_N_SEL(dev, chan) (dev << (14 + (chan * 3))) #define ST_A9_EXTIRQ_INV_SEL(dev) (dev << 20) struct st_irq_syscfg { struct regmap *regmap; unsigned int syscfg; unsigned int config; bool ext_inverted; }; static const struct of_device_id st_irq_syscfg_match[] = { { .compatible = "st,stih415-irq-syscfg", .data = (void *)STIH415_SYSCFG_642, }, { .compatible = "st,stih416-irq-syscfg", .data = (void *)STIH416_SYSCFG_7543, }, { .compatible = "st,stih407-irq-syscfg", .data = (void *)STIH407_SYSCFG_5102, }, { .compatible = "st,stid127-irq-syscfg", .data = (void *)STID127_SYSCFG_734, }, {} }; static int st_irq_xlate(struct platform_device *pdev, int device, int channel, bool irq) { struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev); /* Set the device enable bit. */ switch (device) { case ST_IRQ_SYSCFG_EXT_0: ddata->config |= ST_A9_IRQ_EN_EXT_0; break; case ST_IRQ_SYSCFG_EXT_1: ddata->config |= ST_A9_IRQ_EN_EXT_1; break; case ST_IRQ_SYSCFG_EXT_2: ddata->config |= ST_A9_IRQ_EN_EXT_2; break; case ST_IRQ_SYSCFG_CTI_0: ddata->config |= ST_A9_IRQ_EN_CTI_0; break; case ST_IRQ_SYSCFG_CTI_1: ddata->config |= ST_A9_IRQ_EN_CTI_1; break; case ST_IRQ_SYSCFG_PMU_0: ddata->config |= ST_A9_IRQ_EN_PMU_0; break; case ST_IRQ_SYSCFG_PMU_1: ddata->config |= ST_A9_IRQ_EN_PMU_1; break; case ST_IRQ_SYSCFG_pl310_L2: ddata->config |= ST_A9_IRQ_EN_PL310_L2; break; case ST_IRQ_SYSCFG_DISABLED: return 0; default: dev_err(&pdev->dev, "Unrecognised device %d\n", device); return -EINVAL; } /* Select IRQ/FIQ channel for device. */ ddata->config |= irq ? ST_A9_IRQ_N_SEL(device, channel) : ST_A9_FIQ_N_SEL(device, channel); return 0; } static int st_irq_syscfg_enable(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev); int channels, ret, i; u32 device, invert; channels = of_property_count_u32_elems(np, "st,irq-device"); if (channels != ST_A9_IRQ_MAX_CHANS) { dev_err(&pdev->dev, "st,enable-irq-device must have 2 elems\n"); return -EINVAL; } channels = of_property_count_u32_elems(np, "st,fiq-device"); if (channels != ST_A9_IRQ_MAX_CHANS) { dev_err(&pdev->dev, "st,enable-fiq-device must have 2 elems\n"); return -EINVAL; } for (i = 0; i < ST_A9_IRQ_MAX_CHANS; i++) { of_property_read_u32_index(np, "st,irq-device", i, &device); ret = st_irq_xlate(pdev, device, i, true); if (ret) return ret; of_property_read_u32_index(np, "st,fiq-device", i, &device); ret = st_irq_xlate(pdev, device, i, false); if (ret) return ret; } /* External IRQs may be inverted. */ of_property_read_u32(np, "st,invert-ext", &invert); ddata->config |= ST_A9_EXTIRQ_INV_SEL(invert); return regmap_update_bits(ddata->regmap, ddata->syscfg, ST_A9_IRQ_MASK, ddata->config); } static int st_irq_syscfg_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; struct st_irq_syscfg *ddata; ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); if (!ddata) return -ENOMEM; match = of_match_device(st_irq_syscfg_match, &pdev->dev); if (!match) return -ENODEV; ddata->syscfg = (unsigned int)match->data; ddata->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); if (IS_ERR(ddata->regmap)) { dev_err(&pdev->dev, "syscfg phandle missing\n"); return PTR_ERR(ddata->regmap); } dev_set_drvdata(&pdev->dev, ddata); return st_irq_syscfg_enable(pdev); } static int st_irq_syscfg_resume(struct device *dev) { struct st_irq_syscfg *ddata = dev_get_drvdata(dev); return regmap_update_bits(ddata->regmap, ddata->syscfg, ST_A9_IRQ_MASK, ddata->config); } static SIMPLE_DEV_PM_OPS(st_irq_syscfg_pm_ops, NULL, st_irq_syscfg_resume); static struct platform_driver st_irq_syscfg_driver = { .driver = { .name = "st_irq_syscfg", .pm = &st_irq_syscfg_pm_ops, .of_match_table = st_irq_syscfg_match, }, .probe = st_irq_syscfg_probe, }; static int __init st_irq_syscfg_init(void) { return platform_driver_register(&st_irq_syscfg_driver); } core_initcall(st_irq_syscfg_init);
include/dt-bindings/interrupt-controller/irq-st.h 0 → 100644 +30 −0 Original line number Diff line number Diff line /* * include/linux/irqchip/irq-st.h * * Copyright (C) 2014 STMicroelectronics – All Rights Reserved * * Author: Lee Jones <lee.jones@linaro.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H #define _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H #define ST_IRQ_SYSCFG_EXT_0 0 #define ST_IRQ_SYSCFG_EXT_1 1 #define ST_IRQ_SYSCFG_EXT_2 2 #define ST_IRQ_SYSCFG_CTI_0 3 #define ST_IRQ_SYSCFG_CTI_1 4 #define ST_IRQ_SYSCFG_PMU_0 5 #define ST_IRQ_SYSCFG_PMU_1 6 #define ST_IRQ_SYSCFG_pl310_L2 7 #define ST_IRQ_SYSCFG_DISABLED 0xFFFFFFFF #define ST_IRQ_SYSCFG_EXT_1_INV 0x1 #define ST_IRQ_SYSCFG_EXT_2_INV 0x2 #define ST_IRQ_SYSCFG_EXT_3_INV 0x4 #endif