Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c6c8fea2 authored by Sven Eckelmann's avatar Sven Eckelmann Committed by David S. Miller
Browse files

net: Add batman-adv meshing protocol 

B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing
protocol for multi-hop ad-hoc mesh networks. The networks may be wired or
wireless. See http://www.open-mesh.org/

 for more information and user space
tools.

Signed-off-by: default avatarSven Eckelmann <sven@narfation.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b236da69

Documentation/ABI/testing/sysfs-class-net-batman-adv

0 → 100644
+14 −0
Original line number Diff line number Diff line 


What:           /sys/class/net/<iface>/batman-adv/mesh_iface

Date:           May 2010

Contact:        Marek Lindner <lindner_marek@yahoo.de>

Description:

                The /sys/class/net/<iface>/batman-adv/mesh_iface file

                displays the batman mesh interface this <iface>

                currently is associated with.



What:           /sys/class/net/<iface>/batman-adv/iface_status

Date:           May 2010

Contact:        Marek Lindner <lindner_marek@yahoo.de>

Description:

                Indicates the status of <iface> as it is seen by batman.

Documentation/ABI/testing/sysfs-class-net-mesh

0 → 100644
+69 −0
Original line number Diff line number Diff line 


What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms

Date:           May 2010

Contact:        Marek Lindner <lindner_marek@yahoo.de>

Description:

                Indicates whether the batman protocol messages of the

                mesh <mesh_iface> shall be aggregated or not.



What:           /sys/class/net/<mesh_iface>/mesh/bonding

Date:           June 2010

Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>

Description:

                Indicates whether the data traffic going through the

                mesh will be sent using multiple interfaces at the

                same time (if available).



What:           /sys/class/net/<mesh_iface>/mesh/fragmentation

Date:           October 2010

Contact:        Andreas Langer <an.langer@gmx.de>

Description:

                Indicates whether the data traffic going through the

                mesh will be fragmented or silently discarded if the

                packet size exceeds the outgoing interface MTU.



What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth

Date:           October 2010

Contact:        Marek Lindner <lindner_marek@yahoo.de>

Description:

                Defines the bandwidth which is propagated by this

                node if gw_mode was set to 'server'.



What:           /sys/class/net/<mesh_iface>/mesh/gw_mode

Date:           October 2010

Contact:        Marek Lindner <lindner_marek@yahoo.de>

Description:

                Defines the state of the gateway features. Can be

                either 'off', 'client' or 'server'.



What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class

Date:           October 2010

Contact:        Marek Lindner <lindner_marek@yahoo.de>

Description:

                Defines the selection criteria this node will use

                to choose a gateway if gw_mode was set to 'client'.



What:           /sys/class/net/<mesh_iface>/mesh/orig_interval

Date:           May 2010

Contact:        Marek Lindner <lindner_marek@yahoo.de>

Description:

                Defines the interval in milliseconds in which batman

                sends its protocol messages.



What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty

Date:           Oct 2010

Contact:        Linus Lüssing <linus.luessing@web.de>

Description:

		Defines the penalty which will be applied to an

		originator message's tq-field on every hop.



What:           /sys/class/net/<mesh_iface>/mesh/vis_mode

Date:           May 2010

Contact:        Marek Lindner <lindner_marek@yahoo.de>

Description:

                Each batman node only maintains information about its

                own local neighborhood, therefore generating graphs

                showing the topology of the entire mesh is not easily

                feasible without having a central instance to collect

                the local topologies from all nodes. This file allows

                to activate the collecting (server) mode.

Documentation/networking/batman-adv.txt

0 → 100644
+240 −0
Original line number Diff line number Diff line 
[state: 21-11-2010]



BATMAN-ADV

----------



Batman  advanced  is  a new approach to wireless networking which

does no longer operate on the IP basis. Unlike the batman daemon,

which  exchanges  information  using UDP packets and sets routing

tables, batman-advanced operates on ISO/OSI Layer 2 only and uses

and  routes  (or  better: bridges) Ethernet Frames. It emulates a

virtual network switch of all nodes participating.  Therefore all

nodes  appear  to be link local, thus all higher operating proto-

cols won't be affected by any changes within the network. You can

run almost any protocol above batman advanced, prominent examples

are: IPv4, IPv6, DHCP, IPX.



Batman advanced was implemented as a Linux kernel driver  to  re-

duce the overhead to a minimum. It does not depend on any (other)

network driver, and can be used on wifi as well as ethernet  lan,

vpn,  etc ... (anything with ethernet-style layer 2).



CONFIGURATION

-------------



Load the batman-adv module into your kernel:



# insmod batman-adv.ko



The  module  is now waiting for activation. You must add some in-

terfaces on which batman can operate. After  loading  the  module

batman  advanced  will scan your systems interfaces to search for

compatible interfaces. Once found, it will create  subfolders  in

the /sys directories of each supported interface, e.g.



# ls /sys/class/net/eth0/batman_adv/

# iface_status  mesh_iface



If an interface does not have the "batman_adv" subfolder it prob-

ably is not supported. Not supported  interfaces  are:  loopback,

non-ethernet and batman's own interfaces.



Note:  After the module was loaded it will continuously watch for

new interfaces to verify the compatibility. There is no  need  to

reload the module if you plug your USB wifi adapter into your ma-

chine after batman advanced was initially loaded.



To activate a  given  interface  simply  write  "bat0"  into  its

"mesh_iface" file inside the batman_adv subfolder:



# echo bat0 > /sys/class/net/eth0/batman_adv/mesh_iface



Repeat  this step for all interfaces you wish to add.  Now batman

starts using/broadcasting on this/these interface(s).



By reading the "iface_status" file you can check its status:



# cat /sys/class/net/eth0/batman_adv/iface_status

# active



To deactivate an interface you have  to  write  "none"  into  its

"mesh_iface" file:



# echo none > /sys/class/net/eth0/batman_adv/mesh_iface





All  mesh  wide  settings  can be found in batman's own interface

folder:



#  ls  /sys/class/net/bat0/mesh/

#  aggregated_ogms  bonding  fragmentation  orig_interval

#  vis_mode





There is a special folder for debugging informations:



#  ls /sys/kernel/debug/batman_adv/bat0/

#  originators  socket  transtable_global  transtable_local

#  vis_data





Some of the files contain all sort of status information  regard-

ing  the  mesh  network.  For  example, you can view the table of

originators (mesh participants) with:



# cat /sys/kernel/debug/batman_adv/bat0/originators



Other files allow to change batman's behaviour to better fit your

requirements.  For instance, you can check the current originator

interval (value in milliseconds which determines how often batman

sends its broadcast packets):



# cat /sys/class/net/bat0/mesh/orig_interval

# 1000



and also change its value:



# echo 3000 > /sys/class/net/bat0/mesh/orig_interval



In very mobile scenarios, you might want to adjust the originator

interval to a lower value. This will make the mesh  more  respon-

sive to topology changes, but will also increase the overhead.





USAGE

-----



To  make use of your newly created mesh, batman advanced provides

a new interface "bat0" which you should use from this  point  on.

All  interfaces  added  to  batman  advanced are not relevant any

longer because batman handles them for you. Basically, one "hands

over" the data by using the batman interface and batman will make

sure it reaches its destination.



The "bat0" interface can be used like any  other  regular  inter-

face.  It needs an IP address which can be either statically con-

figured or dynamically (by using DHCP or similar services):



# NodeA: ifconfig bat0 192.168.0.1

# NodeB: ifconfig bat0 192.168.0.2

# NodeB: ping 192.168.0.1



Note:  In  order to avoid problems remove all IP addresses previ-

ously assigned to interfaces now used by batman advanced, e.g.



# ifconfig eth0 0.0.0.0





VISUALIZATION

-------------



If you want topology visualization, at least one mesh  node  must

be configured as VIS-server:



# echo "server" > /sys/class/net/bat0/mesh/vis_mode



Each  node  is  either configured as "server" or as "client" (de-

fault: "client").  Clients send their topology data to the server

next to them, and server synchronize with other servers. If there

is no server configured (default) within the  mesh,  no  topology

information   will  be  transmitted.  With  these  "synchronizing

servers", there can be 1 or more vis servers sharing the same (or

at least very similar) data.



When  configured  as  server,  you can get a topology snapshot of

your mesh:



# cat /sys/kernel/debug/batman_adv/bat0/vis_data



This raw output is intended to be easily parsable and convertable

with  other tools. Have a look at the batctl README if you want a

vis output in dot or json format for instance and how those  out-

puts could then be visualised in an image.



The raw format consists of comma separated values per entry where

each entry is giving information about a  certain  source  inter-

face.  Each  entry can/has to have the following values:

-> "mac" - mac address of an originator's source interface

           (each line begins with it)

-> "TQ mac  value"  -  src mac's link quality towards mac address

                       of a neighbor originator's interface which

                       is being used for routing

-> "HNA mac" - HNA announced by source mac

-> "PRIMARY" - this  is a primary interface

-> "SEC mac" - secondary mac address of source

               (requires preceding PRIMARY)



The TQ value has a range from 4 to 255 with 255 being  the  best.

The HNA entries are showing which hosts are connected to the mesh

via bat0 or being bridged into the mesh network.  The PRIMARY/SEC

values are only applied on primary interfaces





LOGGING/DEBUGGING

-----------------



All error messages, warnings and information messages are sent to

the kernel log. Depending on your operating  system  distribution

this  can  be read in one of a number of ways. Try using the com-

mands: dmesg, logread, or looking in the files  /var/log/kern.log

or  /var/log/syslog.  All  batman-adv  messages are prefixed with

"batman-adv:" So to see just these messages try



# dmesg | grep batman-adv



When investigating problems with your mesh network  it  is  some-

times  necessary  to see more detail debug messages. This must be

enabled when compiling the batman-adv module. When building  bat-

man-adv  as  part of kernel, use "make menuconfig" and enable the

option "B.A.T.M.A.N. debugging".



Those additional  debug messages can be accessed  using a special

file in debugfs



# cat /sys/kernel/debug/batman_adv/bat0/log



The additional debug output is by default disabled. It can be en-

abled  during run time. Following log_levels are defined:



0 - All  debug  output  disabled

1 - Enable messages related to routing / flooding / broadcasting

2 - Enable route or hna added / changed / deleted

3 - Enable all messages



The debug output can be changed at runtime  using  the  file

/sys/class/net/bat0/mesh/log_level. e.g.



# echo 2 > /sys/class/net/bat0/mesh/log_level



will enable debug messages for when routes or HNAs change.





BATCTL

------



As batman advanced operates on layer 2 all hosts participating in

the  virtual switch are completely transparent for all  protocols

above layer 2. Therefore the common diagnosis tools do  not  work

as  expected.  To  overcome these problems batctl was created. At

the  moment the  batctl contains ping,  traceroute,  tcpdump  and

interfaces to the kernel module settings.



For more information, please see the manpage (man batctl).



batctl is available on http://www.open-mesh.org/





CONTACT

-------



Please send us comments, experiences, questions, anything :)



IRC:            #batman   on   irc.freenode.org

Mailing-list:   b.a.t.m.a.n@b.a.t.m.a.n@lists.open-mesh.org

                (optional   subscription   at

                 https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n)



You can also contact the Authors:



Marek  Lindner  <lindner_marek@yahoo.de>

Simon  Wunderlich  <siwu@hrz.tu-chemnitz.de>

MAINTAINERS

+9 −0
Original line number Diff line number Diff line
@@ -1264,6 +1264,15 @@ S: Maintained 
F:	drivers/video/backlight/

F:	include/linux/backlight.h



BATMAN ADVANCED

M:	Marek Lindner <lindner_marek@yahoo.de>

M:	Simon Wunderlich <siwu@hrz.tu-chemnitz.de>

M:	Sven Eckelmann <sven@narfation.org>

L:	b.a.t.m.a.n@lists.open-mesh.org

W:	http://www.open-mesh.org/

S:	Maintained

F:	net/batman-adv/



BAYCOM/HDLCDRV DRIVERS FOR AX.25

M:	Thomas Sailer <t.sailer@alumni.ethz.ch>

L:	linux-hams@vger.kernel.org

net/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -214,6 +214,7 @@ source "net/ieee802154/Kconfig" 
source "net/sched/Kconfig"

source "net/dcb/Kconfig"

source "net/dns_resolver/Kconfig"

source "net/batman-adv/Kconfig"



config RPS

	boolean