Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit bdffe5d2 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz
Browse files

cmd640: always auto-tune PIO 



* Default to tuning PIO0 and disabling prefetch prior to probing
  devices for CONFIG_BLK_DEV_CMD640_ENHANCED=y case.

* Always auto-tune PIO.

* Remove no longer used retrieve_drive_counts().

Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 0d28ec7f

drivers/ide/pci/cmd640.c

+12 −55
Original line number Diff line number Diff line
@@ -380,6 +380,7 @@ static void cmd640_dump_regs(void) 
}

#endif



#ifndef CONFIG_BLK_DEV_CMD640_ENHANCED

/*

 * Check whether prefetch is on for a drive,

 * and initialize the unmask flags for safe operation.
@@ -400,9 +401,7 @@ static void __init check_prefetch(ide_drive_t *drive, unsigned int index) 
		drive->no_io_32bit = 0;

	}

}



#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED



#else

/*

 * Sets prefetch mode for a drive.

 */
@@ -458,34 +457,6 @@ static inline u8 pack_nibbles(u8 upper, u8 lower) 
	return ((upper & 0x0f) << 4) | (lower & 0x0f);

}



/*

 * This routine retrieves the initial drive timings from the chipset.

 */

static void __init retrieve_drive_counts(unsigned int index)

{

	u8 b;



	/*

	 * Get the internal setup timing, and convert to clock count

	 */

	b = get_cmd640_reg(arttim_regs[index]) & ~0x3f;

	switch (b) {

	case 0x00: b = 4; break;

	case 0x80: b = 3; break;

	case 0x40: b = 2; break;

	default:   b = 5; break;

	}

	setup_counts[index] = b;



	/*

	 * Get the active/recovery counts

	 */

	b = get_cmd640_reg(drwtim_regs[index]);

	active_counts[index]   = (b >> 4)   ? (b >> 4)   : 0x10;

	recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10;

}





/*

 * This routine writes the prepared setup/active/recovery counts

 * for a drive into the cmd640 chipset registers to active them.
@@ -683,7 +654,6 @@ static const struct ide_port_info cmd640_port_info __initdata = { 
	.chipset		= ide_cmd640,

	.host_flags		= IDE_HFLAG_SERIALIZE |

				  IDE_HFLAG_NO_DMA |

				  IDE_HFLAG_NO_AUTOTUNE |

				  IDE_HFLAG_ABUSE_PREFETCH |

				  IDE_HFLAG_ABUSE_FAST_DEVSEL,

#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
@@ -866,11 +836,9 @@ static int __init cmd640x_init(void) 
		}



#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED

		if (drive->autotune || ((index > 1) && second_port_toggled)) {

		/*

			 * Reset timing to the slowest speed and turn off

			 * prefetch.  This way, the drive identify code has

			 * a better chance.

		 * Reset timing to the slowest speed and turn off prefetch.

		 * This way, the drive identify code has a better chance.

		 */

		setup_counts    [index] = 4;	/* max possible */

		active_counts   [index] = 16;	/* max possible */
@@ -878,17 +846,6 @@ static int __init cmd640x_init(void) 
		program_drive_counts(drive, index);

		set_prefetch_mode(drive, index, 0);

		printk("cmd640: drive%d timings/prefetch cleared\n", index);

		} else {

			/*

			 * Record timings/prefetch without changing them.

			 * This preserves any prior BIOS setup.

			 */

			retrieve_drive_counts (index);

			check_prefetch(drive, index);

			printk("cmd640: drive%d timings/prefetch(%s) preserved",

				index, drive->no_io_32bit ? "off" : "on");

			display_clocks(index);

		}

#else

		/*

		 * Set the drive unmask flags to match the prefetch setting