Merge "ARM: dts: msm: Add display panel support for HDK845" (b8740990) · Commits · e / devices / android_kernel_fairphone_FP3

arch/arm64/boot/dts/qcom/sda845-v2-hdk-overlay.dts

+25 −0

Original line number	Diff line number	Diff line
		@@ -29,3 +29,28 @@
		qcom,msm-id = <341 0x20000>;
		qcom,board-id = <0x01001F 0x00>;
		};

		&dsi_dual_nt36850_truly_cmd {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,mdss-dsi-mode-sel-gpio-state = "dual_port";
		qcom,panel-mode-gpio = <&tlmm 52 0>;
		qcom,platform-te-gpio = <&tlmm 10 0>;
		qcom,platform-reset-gpio = <&tlmm 6 0>;
		};

		&dsi_dual_nt36850_truly_cmd_display {
		qcom,dsi-display-active;
		};

		&labibb {
		status = "ok";
		qcom,qpnp-labibb-mode = "lcd";
		};

		&pmi8998_wled {
		status = "okay";
		qcom,led-strings-list = [01 02];
		};

arch/arm64/boot/dts/qcom/sdm845-interposer-pm660.dtsi

+6 −0

Original line number	Diff line number	Diff line
		@@ -66,6 +66,12 @@
		ibb-supply = <&lcdb_ncp_vreg>;
		};

		&dsi_dual_nt36850_truly_cmd_display {
		vddio-supply = <&pm660_l11>;
		lab-supply = <&lcdb_ldo_vreg>;
		ibb-supply = <&lcdb_ncp_vreg>;
		};

		&sde_dp {
		status = "disabled";
		/delete-property/ vdda-1p2-supply;

arch/arm64/boot/dts/qcom/sdm845-sde-display.dtsi

+39 −0

Original line number	Diff line number	Diff line
		@@ -27,6 +27,7 @@
		#include "dsi-panel-s6e3ha3-amoled-dualmipi-wqhd-cmd.dtsi"
		#include "dsi-panel-nt35597-dualmipi-wqxga-video.dtsi"
		#include "dsi-panel-nt35597-dualmipi-wqxga-cmd.dtsi"
		#include "dsi-panel-nt36850-truly-dualmipi-wqhd-cmd.dtsi"
		#include <dt-bindings/clock/mdss-10nm-pll-clk.h>

		&soc {
		@@ -451,6 +452,30 @@
		ibb-supply = <&ibb_regulator>;
		};

		dsi_dual_nt36850_truly_cmd_display: qcom,dsi-display@16 {
		compatible = "qcom,dsi-display";
		label = "dsi_dual_nt36850_truly_cmd_display";
		qcom,display-type = "primary";

		qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>;
		qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>;
		clocks = <&mdss_dsi0_pll BYTECLK_MUX_0_CLK>,
		<&mdss_dsi0_pll PCLK_MUX_0_CLK>;
		clock-names = "src_byte_clk", "src_pixel_clk";

		pinctrl-names = "panel_active", "panel_suspend";
		pinctrl-0 = <&sde_dsi_active &sde_te_active>;
		pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
		qcom,platform-te-gpio = <&tlmm 10 0>;
		qcom,platform-reset-gpio = <&tlmm 6 0>;
		qcom,panel-mode-gpio = <&tlmm 52 0>;

		qcom,dsi-panel = <&dsi_dual_nt36850_truly_cmd>;
		vddio-supply = <&pm8998_l14>;
		lab-supply = <&lab_regulator>;
		ibb-supply = <&ibb_regulator>;
		};

		sde_wb: qcom,wb-display@0 {
		compatible = "qcom,wb-display";
		cell-index = <0>;
		@@ -760,3 +785,17 @@
		};
		};
		};

		&dsi_dual_nt36850_truly_cmd {
		qcom,mdss-dsi-t-clk-post = <0x0E>;
		qcom,mdss-dsi-t-clk-pre = <0x30>;
		qcom,mdss-dsi-display-timings {
		timing@0 {
		qcom,mdss-dsi-panel-phy-timings = [00 1f 08 08 24 23 08
		08 05 03 04 00];
		qcom,display-topology = <2 0 2>,
		<1 0 2>;
		qcom,default-topology-index = <0>;
		};
		};
		};