Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b502545d authored by Sandeep Panda's avatar Sandeep Panda Committed by Aravind Venkateswaran
Browse files

ARM: dts: msm: enable ESD check for nt35597 truly panel on sdm845 



Enable register read based ESD check feature for nt35597 truly
command mode panel used on SDM845 MTP.

Change-Id: Idd2270ecade277a648f0e6e7010ec9cdfb0f5c7d
Signed-off-by: default avatarSandeep Panda <spanda@codeaurora.org>
parent 0364b310

arch/arm64/boot/dts/qcom/sdm845-sde-display.dtsi

+14 −0
Original line number Diff line number Diff line
@@ -504,6 +504,13 @@ 
&dsi_dual_nt35597_truly_cmd {

	qcom,mdss-dsi-t-clk-post = <0x0D>;

	qcom,mdss-dsi-t-clk-pre = <0x2D>;

	qcom,esd-check-enabled;

	qcom,mdss-dsi-panel-status-check-mode = "reg_read";

	qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];

	qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";

	qcom,mdss-dsi-panel-status-value = <0x9c>;

	qcom,mdss-dsi-panel-on-check-value = <0x9c>;

	qcom,mdss-dsi-panel-status-read-length = <1>;

	qcom,mdss-dsi-display-timings {

		timing@0{

			qcom,mdss-dsi-panel-phy-timings = [00 1c 07 07 23 21 07
@@ -519,6 +526,13 @@ 
	qcom,mdss-dsi-t-clk-post = <0x0b>;

	qcom,mdss-dsi-t-clk-pre = <0x23>;

	qcom,ulps-enabled;

	qcom,esd-check-enabled;

	qcom,mdss-dsi-panel-status-check-mode = "reg_read";

	qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];

	qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";

	qcom,mdss-dsi-panel-status-value = <0x9c>;

	qcom,mdss-dsi-panel-on-check-value = <0x9c>;

	qcom,mdss-dsi-panel-status-read-length = <1>;

	qcom,mdss-dsi-display-timings {

		timing@0{

			qcom,mdss-dsi-panel-phy-timings = [00 15 05 05 20 1f 05