Commit b259e51f authored Sep 05, 2015 by Aurelien Jarno Committed by Ralf Baechle Sep 22, 2015

MIPS: BPF: Fix build on pre-R2 little endian CPUs



The rotr, seh and wsbh instructions have been introduced with the R2
ISA. Thus the current BPF code fails to build on pre-R2 little endian
CPUs:

    CC      arch/mips/net/bpf_jit.o
    AS      arch/mips/net/bpf_jit_asm.o
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S: Assembler messages:
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:67: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:68: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:83: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:84: Error: opcode not supported on this processor: mips32 (mips32) `seh $19,$8'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:151: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$12'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:153: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:164: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $19,$12'
  /home/aurel32/linux-4.2/scripts/Makefile.build:294: recipe for target 'arch/mips/net/bpf_jit_asm.o' failed

Fix that by providing equivalent code for these CPUs.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: stable@vger.kernel.org # v4.2+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11098/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

parent faa9724a

arch/mips/net/bpf_jit_asm.S

+42 −0

Original line number	Diff line number	Diff line
		@@ -64,8 +64,20 @@ sk_load_word_positive:
		PTR_ADDU t1, $r_skb_data, offset
		lw $r_A, 0(t1)
		#ifdef CONFIG_CPU_LITTLE_ENDIAN
		# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
		wsbh t0, $r_A
		rotr $r_A, t0, 16
		# else
		sll t0, $r_A, 24
		srl t1, $r_A, 24
		srl t2, $r_A, 8
		or t0, t0, t1
		andi t2, t2, 0xff00
		andi t1, $r_A, 0xff00
		or t0, t0, t2
		sll t1, t1, 8
		or $r_A, t0, t1
		# endif
		#endif
		jr $r_ra
		move $r_ret, zero
		@@ -80,8 +92,16 @@ sk_load_half_positive:
		PTR_ADDU t1, $r_skb_data, offset
		lh $r_A, 0(t1)
		#ifdef CONFIG_CPU_LITTLE_ENDIAN
		# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
		wsbh t0, $r_A
		seh $r_A, t0
		# else
		sll t0, $r_A, 24
		andi t1, $r_A, 0xff00
		sra t0, t0, 16
		srl t1, t1, 8
		or $r_A, t0, t1
		# endif
		#endif
		jr $r_ra
		move $r_ret, zero
		@@ -148,9 +168,22 @@ sk_load_byte_positive:
		NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
		bpf_slow_path_common(4)
		#ifdef CONFIG_CPU_LITTLE_ENDIAN
		# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
		wsbh t0, $r_s0
		jr $r_ra
		rotr $r_A, t0, 16
		# else
		sll t0, $r_s0, 24
		srl t1, $r_s0, 24
		srl t2, $r_s0, 8
		or t0, t0, t1
		andi t2, t2, 0xff00
		andi t1, $r_s0, 0xff00
		or t0, t0, t2
		sll t1, t1, 8
		jr $r_ra
		or $r_A, t0, t1
		# endif
		#else
		jr $r_ra
		move $r_A, $r_s0
		@@ -161,8 +194,17 @@ NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
		NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
		bpf_slow_path_common(2)
		#ifdef CONFIG_CPU_LITTLE_ENDIAN
		# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
		jr $r_ra
		wsbh $r_A, $r_s0
		# else
		sll t0, $r_s0, 8
		andi t1, $r_s0, 0xff00
		andi t0, t0, 0xff00
		srl t1, t1, 8
		jr $r_ra
		or $r_A, t0, t1
		# endif
		#else
		jr $r_ra
		move $r_A, $r_s0