ARM: at91: add Somfy Animeo IP board support

# rm9200

# rm9200

dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb

dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb

# sam9260

# sam9260

dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb

dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb

dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb

dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb

dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb

dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb

dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb

/*

 * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards

 *

 *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

 *

 * Licensed under GPLv2 only.

 */

/dts-v1/;

/include/ "at91sam9260.dtsi"

/ {

	model = "Somfy Animeo IP";

	compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";

	aliases {

		serial0 = &usart1;

		serial1 = &usart2;

		serial2 = &usart0;

		serial3 = &dbgu;

		serial4 = &usart3;

		serial5 = &uart0;

		serial6 = &uart1;

	};

	chosen {

		linux,stdout-path = &usart2;

	};

	memory {

		reg = <0x20000000 0x4000000>;

	};

	clocks {

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;

		main_clock: clock@0 {

			compatible = "atmel,osc", "fixed-clock";

			clock-frequency = <18432000>;

		};

	};

	ahb {

		apb {

			usart0: serial@fffb0000 {

				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;

				linux,rs485-enabled-at-boot-time;

				status = "okay";

			};

			usart1: serial@fffb4000 {

				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;

				linux,rs485-enabled-at-boot-time;

				status = "okay";

			};

			usart2: serial@fffb8000 {

				pinctrl-0 = <&pinctrl_usart2>;

				status = "okay";

			};

			macb0: ethernet@fffc4000 {

				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;

				phy-mode = "mii";

				status = "okay";

			};

		};

		nand0: nand@40000000 {

			nand-bus-width = <8>;

			nand-ecc-mode = "soft";

			nand-on-flash-bbt;

			status = "okay";

			at91bootstrap@0 {

				label = "at91bootstrap";

				reg = <0x0 0x8000>;

			};

			barebox@8000 {

				label = "barebox";

				reg = <0x8000 0x40000>;

			};

			bareboxenv@48000 {

				label = "bareboxenv";

				reg = <0x48000 0x8000>;

			};

			user_block@0x50000 {

				label = "user_block";

				reg = <0x50000 0xb0000>;

			};

			kernel@100000 {

				label = "kernel";

				reg = <0x100000 0x1b0000>;

			};

			root@2b0000 {

				label = "root";

				reg = <0x2b0000 0x1D50000>;

			};

		};

		usb0: ohci@00500000 {

			num-ports = <2>;

			atmel,vbus-gpio = <&pioB 15 1>;

			status = "okay";

		};

	};

	leds {

		compatible = "gpio-leds";

		power_green {

			label = "power_green";

			gpios = <&pioC 17 0>;

			linux,default-trigger = "heartbeat";

		};

		power_red {

			label = "power_red";

			gpios = <&pioA 2 0>;

		};

		tx_green {

			label = "tx_green";

			gpios = <&pioC 19 0>;

		};

		tx_red {

			label = "tx_red";

			gpios = <&pioC 18 0>;

		};

	};

	gpio_keys {

		compatible = "gpio-keys";

		#address-cells = <1>;

		#size-cells = <0>;

		keyswitch_in {

			label = "keyswitch_in";

			gpios = <&pioB 1 0>;

			linux,code = <28>;

			gpio-key,wakeup;

		};

		error_in {

			label = "error_in";

			gpios = <&pioB 2 0>;

			linux,code = <29>;

			gpio-key,wakeup;

		};

		btn {

			label = "btn";

			gpios = <&pioC 23 0>;

			linux,code = <31>;

			gpio-key,wakeup;

		};

	};

};