Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a6afd9f3 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files

tty: move a number of tty drivers from drivers/char/ to drivers/tty/ 



As planned by Arnd Bergmann, this moves the following drivers from
drivers/char/ to drivers/tty/ as that's where they really belong:
	amiserial
	nozomi
	synclink
	rocket
	cyclades
	moxa
	mxser
	isicom
	bfin_jtag_comm

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 44ed76b7

drivers/char/Kconfig

+0 −172
Original line number Diff line number Diff line
@@ -15,36 +15,6 @@ config DEVKMEM 
	  kind of kernel debugging operations.

	  When in doubt, say "N".



config BFIN_JTAG_COMM

	tristate "Blackfin JTAG Communication"

	depends on BLACKFIN

	help

	  Add support for emulating a TTY device over the Blackfin JTAG.



	  To compile this driver as a module, choose M here: the

	  module will be called bfin_jtag_comm.



config BFIN_JTAG_COMM_CONSOLE

	bool "Console on Blackfin JTAG"

	depends on BFIN_JTAG_COMM=y



config SERIAL_NONSTANDARD

	bool "Non-standard serial port support"

	depends on HAS_IOMEM

	---help---

	  Say Y here if you have any non-standard serial boards -- boards

	  which aren't supported using the standard "dumb" serial driver.

	  This includes intelligent serial boards such as Cyclades,

	  Digiboards, etc. These are usually used for systems that need many

	  serial ports because they serve many terminals or dial-in

	  connections.



	  Note that the answer to this question won't directly affect the

	  kernel: saying N will just cause the configurator to skip all

	  the questions about non-standard serial boards.



	  Most people can say N here.



config COMPUTONE

	tristate "Computone IntelliPort Plus serial support"

	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
@@ -60,50 +30,6 @@ config COMPUTONE 
	  To compile this driver as module, choose M here: the

	  module will be called ip2.



config ROCKETPORT

	tristate "Comtrol RocketPort support"

	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)

	help

	  This driver supports Comtrol RocketPort and RocketModem PCI boards.   

          These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or

          modems.  For information about the RocketPort/RocketModem  boards

          and this driver read <file:Documentation/serial/rocket.txt>.



	  To compile this driver as a module, choose M here: the

	  module will be called rocket.



	  If you want to compile this driver into the kernel, say Y here.  If

          you don't have a Comtrol RocketPort/RocketModem card installed, say N.



config CYCLADES

	tristate "Cyclades async mux support"

	depends on SERIAL_NONSTANDARD && (PCI || ISA)

	select FW_LOADER

	---help---

	  This driver supports Cyclades Z and Y multiserial boards.

	  You would need something like this to connect more than two modems to

	  your Linux box, for instance in order to become a dial-in server.



	  For information about the Cyclades-Z card, read

	  <file:Documentation/serial/README.cycladesZ>.



	  To compile this driver as a module, choose M here: the

	  module will be called cyclades.



	  If you haven't heard about it, it's safe to say N.



config CYZ_INTR

	bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"

	depends on EXPERIMENTAL && CYCLADES

	help

	  The Cyclades-Z family of multiport cards allows 2 (two) driver op

	  modes: polling and interrupt. In polling mode, the driver will check

	  the status of the Cyclades-Z ports every certain amount of time

	  (which is called polling cycle and is configurable). In interrupt

	  mode, it will use an interrupt line (IRQ) in order to check the

	  status of the Cyclades-Z ports. The default op mode is polling. If

	  unsure, say N.



config DIGIEPCA

	tristate "Digiboard Intelligent Async Support"

	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
@@ -119,94 +45,6 @@ config DIGIEPCA 
	  To compile this driver as a module, choose M here: the

	  module will be called epca.



config MOXA_INTELLIO

	tristate "Moxa Intellio support"

	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)

	select FW_LOADER

	help

	  Say Y here if you have a Moxa Intellio multiport serial card.



	  To compile this driver as a module, choose M here: the

	  module will be called moxa.



config MOXA_SMARTIO

	tristate "Moxa SmartIO support v. 2.0"

	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)

	help

	  Say Y here if you have a Moxa SmartIO multiport serial card and/or

	  want to help develop a new version of this driver.



	  This is upgraded (1.9.1) driver from original Moxa drivers with

	  changes finally resulting in PCI probing.



	  This driver can also be built as a module. The module will be called

	  mxser. If you want to do that, say M here.



config ISI

	tristate "Multi-Tech multiport card support (EXPERIMENTAL)"

	depends on SERIAL_NONSTANDARD && PCI

	select FW_LOADER

	help

	  This is a driver for the Multi-Tech cards which provide several

	  serial ports.  The driver is experimental and can currently only be

	  built as a module. The module will be called isicom.

	  If you want to do that, choose M here.



config SYNCLINK

	tristate "Microgate SyncLink card support"

	depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API

	help

	  Provides support for the SyncLink ISA and PCI multiprotocol serial

	  adapters. These adapters support asynchronous and HDLC bit

	  synchronous communication up to 10Mbps (PCI adapter).



	  This driver can only be built as a module ( = code which can be

	  inserted in and removed from the running kernel whenever you want).

	  The module will be called synclink.  If you want to do that, say M

	  here.



config SYNCLINKMP

	tristate "SyncLink Multiport support"

	depends on SERIAL_NONSTANDARD && PCI

	help

	  Enable support for the SyncLink Multiport (2 or 4 ports)

	  serial adapter, running asynchronous and HDLC communications up

	  to 2.048Mbps. Each ports is independently selectable for

	  RS-232, V.35, RS-449, RS-530, and X.21



	  This driver may be built as a module ( = code which can be

	  inserted in and removed from the running kernel whenever you want).

	  The module will be called synclinkmp.  If you want to do that, say M

	  here.



config SYNCLINK_GT

	tristate "SyncLink GT/AC support"

	depends on SERIAL_NONSTANDARD && PCI

	help

	  Support for SyncLink GT and SyncLink AC families of

	  synchronous and asynchronous serial adapters

	  manufactured by Microgate Systems, Ltd. (www.microgate.com)



config N_HDLC

	tristate "HDLC line discipline support"

	depends on SERIAL_NONSTANDARD

	help

	  Allows synchronous HDLC communications with tty device drivers that

	  support synchronous HDLC such as the Microgate SyncLink adapter.



	  This driver can be built as a module ( = code which can be

	  inserted in and removed from the running kernel whenever you want).

	  The module will be called n_hdlc. If you want to do that, say M

	  here.



config N_GSM

	tristate "GSM MUX line discipline support (EXPERIMENTAL)"

	depends on EXPERIMENTAL

	depends on NET

	help

	  This line discipline provides support for the GSM MUX protocol and

	  presents the mux as a set of 61 individual tty devices.



config RISCOM8

	tristate "SDL RISCom/8 card support"

	depends on SERIAL_NONSTANDARD
@@ -296,16 +134,6 @@ config ISTALLION 
	  To compile this driver as a module, choose M here: the

	  module will be called istallion.



config NOZOMI

	tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"

	depends on PCI && EXPERIMENTAL

	help

	  If you have a HSDPA driver Broadband Wireless Data Card -

	  Globe Trotter PCMCIA card, say Y here.



	  To compile this driver as a module, choose M here, the module

	  will be called nozomi.



config A2232

	tristate "Commodore A2232 serial support (EXPERIMENTAL)"

	depends on EXPERIMENTAL && ZORRO && BROKEN

drivers/char/Makefile

+0 −11
Original line number Diff line number Diff line
@@ -5,29 +5,18 @@ 
obj-y				+= mem.o random.o

obj-$(CONFIG_TTY_PRINTK)	+= ttyprintk.o

obj-y				+= misc.o

obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o

obj-$(CONFIG_MVME147_SCC)	+= generic_serial.o vme_scc.o

obj-$(CONFIG_MVME162_SCC)	+= generic_serial.o vme_scc.o

obj-$(CONFIG_BVME6000_SCC)	+= generic_serial.o vme_scc.o

obj-$(CONFIG_ROCKETPORT)	+= rocket.o

obj-$(CONFIG_SERIAL167)		+= serial167.o

obj-$(CONFIG_CYCLADES)		+= cyclades.o

obj-$(CONFIG_STALLION)		+= stallion.o

obj-$(CONFIG_ISTALLION)		+= istallion.o

obj-$(CONFIG_NOZOMI)		+= nozomi.o

obj-$(CONFIG_DIGIEPCA)		+= epca.o

obj-$(CONFIG_SPECIALIX)		+= specialix.o

obj-$(CONFIG_MOXA_INTELLIO)	+= moxa.o

obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o

obj-$(CONFIG_ATARI_DSP56K)	+= dsp56k.o

obj-$(CONFIG_MOXA_SMARTIO)	+= mxser.o

obj-$(CONFIG_COMPUTONE)		+= ip2/

obj-$(CONFIG_RISCOM8)		+= riscom8.o

obj-$(CONFIG_ISI)		+= isicom.o

obj-$(CONFIG_SYNCLINK)		+= synclink.o

obj-$(CONFIG_SYNCLINKMP)	+= synclinkmp.o

obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o

obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o

obj-$(CONFIG_SX)		+= sx.o generic_serial.o

obj-$(CONFIG_RIO)		+= rio/ generic_serial.o

obj-$(CONFIG_RAW_DRIVER)	+= raw.o

drivers/tty/Kconfig

+171 −0
Original line number Diff line number Diff line
@@ -147,4 +147,175 @@ config LEGACY_PTY_COUNT 
	  When not in use, each legacy PTY occupies 12 bytes on 32-bit

	  architectures and 24 bytes on 64-bit architectures.



config BFIN_JTAG_COMM

	tristate "Blackfin JTAG Communication"

	depends on BLACKFIN

	help

	  Add support for emulating a TTY device over the Blackfin JTAG.



	  To compile this driver as a module, choose M here: the

	  module will be called bfin_jtag_comm.



config BFIN_JTAG_COMM_CONSOLE

	bool "Console on Blackfin JTAG"

	depends on BFIN_JTAG_COMM=y



config SERIAL_NONSTANDARD

	bool "Non-standard serial port support"

	depends on HAS_IOMEM

	---help---

	  Say Y here if you have any non-standard serial boards -- boards

	  which aren't supported using the standard "dumb" serial driver.

	  This includes intelligent serial boards such as Cyclades,

	  Digiboards, etc. These are usually used for systems that need many

	  serial ports because they serve many terminals or dial-in

	  connections.



	  Note that the answer to this question won't directly affect the

	  kernel: saying N will just cause the configurator to skip all

	  the questions about non-standard serial boards.



	  Most people can say N here.



config ROCKETPORT

	tristate "Comtrol RocketPort support"

	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)

	help

	  This driver supports Comtrol RocketPort and RocketModem PCI boards.   

          These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or

          modems.  For information about the RocketPort/RocketModem  boards

          and this driver read <file:Documentation/serial/rocket.txt>.



	  To compile this driver as a module, choose M here: the

	  module will be called rocket.



	  If you want to compile this driver into the kernel, say Y here.  If

          you don't have a Comtrol RocketPort/RocketModem card installed, say N.



config CYCLADES

	tristate "Cyclades async mux support"

	depends on SERIAL_NONSTANDARD && (PCI || ISA)

	select FW_LOADER

	---help---

	  This driver supports Cyclades Z and Y multiserial boards.

	  You would need something like this to connect more than two modems to

	  your Linux box, for instance in order to become a dial-in server.



	  For information about the Cyclades-Z card, read

	  <file:Documentation/serial/README.cycladesZ>.



	  To compile this driver as a module, choose M here: the

	  module will be called cyclades.



	  If you haven't heard about it, it's safe to say N.



config CYZ_INTR

	bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"

	depends on EXPERIMENTAL && CYCLADES

	help

	  The Cyclades-Z family of multiport cards allows 2 (two) driver op

	  modes: polling and interrupt. In polling mode, the driver will check

	  the status of the Cyclades-Z ports every certain amount of time

	  (which is called polling cycle and is configurable). In interrupt

	  mode, it will use an interrupt line (IRQ) in order to check the

	  status of the Cyclades-Z ports. The default op mode is polling. If

	  unsure, say N.



config MOXA_INTELLIO

	tristate "Moxa Intellio support"

	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)

	select FW_LOADER

	help

	  Say Y here if you have a Moxa Intellio multiport serial card.



	  To compile this driver as a module, choose M here: the

	  module will be called moxa.



config MOXA_SMARTIO

	tristate "Moxa SmartIO support v. 2.0"

	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)

	help

	  Say Y here if you have a Moxa SmartIO multiport serial card and/or

	  want to help develop a new version of this driver.



	  This is upgraded (1.9.1) driver from original Moxa drivers with

	  changes finally resulting in PCI probing.



	  This driver can also be built as a module. The module will be called

	  mxser. If you want to do that, say M here.



config SYNCLINK

	tristate "Microgate SyncLink card support"

	depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API

	help

	  Provides support for the SyncLink ISA and PCI multiprotocol serial

	  adapters. These adapters support asynchronous and HDLC bit

	  synchronous communication up to 10Mbps (PCI adapter).



	  This driver can only be built as a module ( = code which can be

	  inserted in and removed from the running kernel whenever you want).

	  The module will be called synclink.  If you want to do that, say M

	  here.



config SYNCLINKMP

	tristate "SyncLink Multiport support"

	depends on SERIAL_NONSTANDARD && PCI

	help

	  Enable support for the SyncLink Multiport (2 or 4 ports)

	  serial adapter, running asynchronous and HDLC communications up

	  to 2.048Mbps. Each ports is independently selectable for

	  RS-232, V.35, RS-449, RS-530, and X.21



	  This driver may be built as a module ( = code which can be

	  inserted in and removed from the running kernel whenever you want).

	  The module will be called synclinkmp.  If you want to do that, say M

	  here.



config SYNCLINK_GT

	tristate "SyncLink GT/AC support"

	depends on SERIAL_NONSTANDARD && PCI

	help

	  Support for SyncLink GT and SyncLink AC families of

	  synchronous and asynchronous serial adapters

	  manufactured by Microgate Systems, Ltd. (www.microgate.com)



config NOZOMI

	tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"

	depends on PCI && EXPERIMENTAL

	help

	  If you have a HSDPA driver Broadband Wireless Data Card -

	  Globe Trotter PCMCIA card, say Y here.



	  To compile this driver as a module, choose M here, the module

	  will be called nozomi.



config ISI

	tristate "Multi-Tech multiport card support (EXPERIMENTAL)"

	depends on SERIAL_NONSTANDARD && PCI

	select FW_LOADER

	help

	  This is a driver for the Multi-Tech cards which provide several

	  serial ports.  The driver is experimental and can currently only be

	  built as a module. The module will be called isicom.

	  If you want to do that, choose M here.



config N_HDLC

	tristate "HDLC line discipline support"

	depends on SERIAL_NONSTANDARD

	help

	  Allows synchronous HDLC communications with tty device drivers that

	  support synchronous HDLC such as the Microgate SyncLink adapter.



	  This driver can be built as a module ( = code which can be

	  inserted in and removed from the running kernel whenever you want).

	  The module will be called n_hdlc. If you want to do that, say M

	  here.



config N_GSM

	tristate "GSM MUX line discipline support (EXPERIMENTAL)"

	depends on EXPERIMENTAL

	depends on NET

	help

	  This line discipline provides support for the GSM MUX protocol and

	  presents the mux as a set of 61 individual tty devices.

drivers/tty/Makefile

+13 −0
Original line number Diff line number Diff line
@@ -11,3 +11,16 @@ obj-$(CONFIG_R3964) += n_r3964.o 
obj-y				+= vt/

obj-$(CONFIG_HVC_DRIVER)	+= hvc/

obj-y				+= serial/



# tty drivers

obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o

obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o

obj-$(CONFIG_CYCLADES)		+= cyclades.o

obj-$(CONFIG_ISI)		+= isicom.o

obj-$(CONFIG_MOXA_INTELLIO)	+= moxa.o

obj-$(CONFIG_MOXA_SMARTIO)	+= mxser.o

obj-$(CONFIG_NOZOMI)		+= nozomi.o

obj-$(CONFIG_ROCKETPORT)	+= rocket.o

obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o

obj-$(CONFIG_SYNCLINKMP)	+= synclinkmp.o

obj-$(CONFIG_SYNCLINK)		+= synclink.o

drivers/char/amiserial.c→drivers/tty/amiserial.c

+0 −0

File moved.

View file