Merge "ARM: dts: msm: add support for 10 inch boent51021 1200p panel on apq8053" (a448ffe1) · Commits · e / devices / android_kernel_fairphone_FP3

Documentation/devicetree/bindings/fb/mdss-dsi.txt

+1 −0

Original line number	Diff line number	Diff line
		@@ -113,6 +113,7 @@ Optional properties:
		- qcom,platform-bklight-en-gpio-invert: Invert the gpio used to enable display back-light
		- qcom,panel-mode-gpio: Specifies the GPIO to select video/command/single-port/dual-port
		mode of panel through gpio when it supports these modes.
		- qcom,ext-vdd-gpio: Specifies the GPIO to enable external VDD supply.
		- pinctrl-names: List of names to assign mdss pin states defined in pinctrl device node
		Refer to pinctrl-bindings.txt
		- pinctrl-<0..n>: Lists phandles each pointing to the pin configuration node within a pin

arch/arm64/boot/dts/qcom/apq8053-lite-dragon-v2.1.dtsi

+1 −1

Original line number	Diff line number	Diff line
		@@ -14,7 +14,7 @@
		#include "apq8053-lite-dragon.dtsi"

		&mdss_dsi0 {
		qcom,ext_vdd-gpio = <&tlmm 100 0>;
		qcom,ext-vdd-gpio = <&tlmm 100 0>;
		qcom,platform-bklight-en-gpio = <&tlmm 95 0>;

		qcom,platform-lane-config = [00 00 ff 0f

arch/arm64/boot/dts/qcom/apq8053-lite-dragon-v2.2.dtsi

+35 −0

Original line number	Diff line number	Diff line
		@@ -18,6 +18,41 @@
		/delete-node/ himax_ts@48;
		};

		&mdss_mdp {
		qcom,mdss-pref-prim-intf = "dsi";
		};

		&mdss_dsi {
		hw-config = "single_dsi";
		};

		&mdss_dsi0 {
		qcom,dsi-pref-prim-pan = <&dsi_boent51021_1200p_video>;
		pinctrl-names = "mdss_default", "mdss_sleep";
		pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
		pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;

		vdd-supply = <&pm8953_l10>;
		vddio-supply = <&pm8953_l6>;
		lab-supply = <&lab_regulator>;
		ibb-supply = <&ibb_regulator>;

		qcom,platform-te-gpio = <&tlmm 24 0>;
		qcom,platform-reset-gpio = <&tlmm 61 0>;
		qcom,ext-vdd-gpio = <&tlmm 100 0>;
		qcom,platform-bklight-en-gpio = <&tlmm 95 0>;

		qcom,platform-lane-config = [00 00 ff 0f
		00 00 ff 0f
		00 00 ff 0f
		00 00 ff 0f
		00 00 ff 8f];
		};

		&mdss_dsi1 {
		status = "disabled";
		};

		&eeprom0 {
		gpios = <&tlmm 26 0>,
		<&tlmm 40 0>,

arch/arm64/boot/dts/qcom/dsi-panel-boent51021-1200p-video.dtsi

0 → 100644

+92 −0

Original line number	Diff line number	Diff line
		/* Novatek Android Driver Sample Code for Novatek chipset
		*
		* Copyright (C) 2015-2018 Novatek Microelectronics Corp.
		*
		* This software is licensed under the terms of the GNU General Public
		* License version 2, as published by the Free Software Foundation, and
		* may be copied, distributed, and modified under those terms.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		*/

		&mdss_mdp {
		dsi_boent51021_1200p_video: qcom,mdss_dsi_boent51021_1200p_video {
		qcom,mdss-dsi-panel-name =
		"boent51021 1200p video mode dsi panel";
		qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;
		qcom,mdss-dsi-panel-type = "dsi_video_mode";
		qcom,mdss-dsi-panel-framerate = <60>;
		qcom,mdss-dsi-virtual-channel-id = <0>;
		qcom,mdss-dsi-stream = <0>;
		qcom,mdss-dsi-panel-width = <1200>;
		qcom,mdss-dsi-panel-height = <1920>;
		qcom,mdss-dsi-h-front-porch = <100>;
		qcom,mdss-dsi-h-back-porch = <32>;
		qcom,mdss-dsi-h-pulse-width = <1>;
		qcom,mdss-dsi-h-sync-skew = <0>;
		qcom,mdss-dsi-v-back-porch = <14>;
		qcom,mdss-dsi-v-front-porch = <25>;
		qcom,mdss-dsi-v-pulse-width = <1>;
		qcom,mdss-dsi-h-left-border = <0>;
		qcom,mdss-dsi-h-right-border = <0>;
		qcom,mdss-dsi-v-top-border = <0>;
		qcom,mdss-dsi-v-bottom-border = <0>;
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		qcom,mdss-dsi-on-command = [
		23 01 00 00 01 00 02 8f a5
		23 01 00 00 00 00 02 83 00
		23 01 00 00 00 00 02 84 00
		23 01 00 00 00 00 02 8c 80
		23 01 00 00 00 00 02 cd 6c
		23 01 00 00 00 00 02 c8 fc
		23 01 00 00 00 00 02 97 00
		23 01 00 00 00 00 02 8b 10
		23 01 00 00 00 00 02 a9 20
		23 01 00 00 00 00 02 83 aa
		23 01 00 00 00 00 02 84 11
		23 01 00 00 00 00 02 a9 4b
		23 01 00 00 00 00 02 85 04
		23 01 00 00 00 00 02 86 08
		23 01 00 00 00 00 02 9c 10
		05 01 00 00 00 00 02 11 00
		23 01 00 00 00 00 02 8f 00
		];
		qcom,mdss-dsi-off-command = [
		23 01 00 00 00 00 02 83 00
		23 01 00 00 78 00 02 84 00
		05 01 00 00 78 00 02 10 00
		];
		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-h-sync-pulse = <1>;
		qcom,mdss-dsi-traffic-mode = "burst_mode";
		qcom,mdss-dsi-lane-map = "lane_map_0123";
		qcom,mdss-dsi-bllp-eof-power-mode;
		qcom,mdss-dsi-bllp-power-mode;
		qcom,mdss-dsi-lane-0-state;
		qcom,mdss-dsi-lane-1-state;
		qcom,mdss-dsi-lane-2-state;
		qcom,mdss-dsi-lane-3-state;
		qcom,mdss-dsi-panel-timings = [
		f2 3a 28 00 6c 70 2c 3e 2e 03 04 00];
		qcom,mdss-dsi-t-clk-post = <0x0e>;
		qcom,mdss-dsi-t-clk-pre = <0x33>;
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-dma-trigger = "trigger_sw";
		qcom,mdss-dsi-mdp-trigger = "none";
		qcom,mdss-dsi-force-clock-lane-hs;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
		qcom,mdss-pan-physical-width-dimension = <135>;
		qcom,mdss-pan-physical-height-dimension = <216>;
		qcom,mdss-dsi-lp11-init;
		qcom,mdss-dsi-post-init-delay = <1>;
		};
		};

arch/arm64/boot/dts/qcom/msm8953-mdss-panels.dtsi

+9 −0

Original line number	Diff line number	Diff line
		@@ -25,6 +25,7 @@
		#include "dsi-panel-lt8912-1080p-video.dtsi"
		#include "dsi-panel-hx8399c-fhd-plus-video.dtsi"
		#include "dsi-panel-hx83100a-800p-video.dtsi"
		#include "dsi-panel-boent51021-1200p-video.dtsi"

		&soc {
		dsi_panel_pwr_supply: dsi_panel_pwr_supply {
		@@ -169,3 +170,11 @@
		1f 1c 05 06 03 03 04 a0
		1f 10 05 06 03 03 04 a0];
		};

		&dsi_boent51021_1200p_video {
		qcom,mdss-dsi-panel-timings-phy-v2 = [25 20 08 0a 06 03 04 a0
		25 20 08 0a 06 03 04 a0
		25 20 08 0a 06 03 04 a0
		25 20 08 0a 06 03 04 a0
		25 1d 08 0a 06 03 04 a0];
		};