Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a2e5f1b3 authored by Javier Martinez Canillas's avatar Javier Martinez Canillas Committed by Mauro Carvalho Chehab
Browse files

[media] tvp5150: Configure data interface via DT



The video decoder supports either 8-bit 4:2:2 YUV with discrete syncs
or 8-bit ITU-R BT.656 with embedded syncs output format but currently
BT.656 it's always reported. Allow to configure the format to use via
either platform data or a device tree definition.

Signed-off-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 09aa2609
Loading
Loading
Loading
Loading
+63 −3
Original line number Diff line number Diff line
@@ -15,6 +15,7 @@
#include <media/v4l2-device.h>
#include <media/i2c/tvp5150.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-of.h>

#include "tvp5150_reg.h"

@@ -43,6 +44,8 @@ struct tvp5150 {
	u32 input;
	u32 output;
	int enable;

	enum v4l2_mbus_type mbus_type;
};

static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
@@ -773,6 +776,10 @@ static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
	v4l2_ctrl_handler_setup(&decoder->hdl);

	tvp5150_set_std(sd, decoder->norm);

	if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
		tvp5150_write(sd, TVP5150_DATA_RATE_SEL, 0x40);

	return 0;
};

@@ -952,7 +959,9 @@ static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
				 struct v4l2_mbus_config *cfg)
{
	cfg->type = V4L2_MBUS_BT656;
	struct tvp5150 *decoder = to_tvp5150(sd);

	cfg->type = decoder->mbus_type;
	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING
		   | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH;

@@ -965,13 +974,20 @@ static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,

static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
{
	struct tvp5150 *decoder = to_tvp5150(sd);
	/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
	int val = 0x09;

	/* Output format: 8-bit 4:2:2 YUV with discrete sync */
	if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
		val = 0x0d;

	/* Initializes TVP5150 to its default values */
	/* # set PCLK (27MHz) */
	tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00);

	/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
	if (enable)
		tvp5150_write(sd, TVP5150_MISC_CTL, 0x09);
		tvp5150_write(sd, TVP5150_MISC_CTL, val);
	else
		tvp5150_write(sd, TVP5150_MISC_CTL, 0x00);

@@ -1206,11 +1222,42 @@ static int tvp5150_init(struct i2c_client *c)
	return 0;
}

static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
{
	struct v4l2_of_endpoint bus_cfg;
	struct device_node *ep;
	unsigned int flags;
	int ret = 0;

	ep = of_graph_get_next_endpoint(np, NULL);
	if (!ep)
		return -EINVAL;

	ret = v4l2_of_parse_endpoint(ep, &bus_cfg);
	if (ret)
		goto err;

	flags = bus_cfg.bus.parallel.flags;

	if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
	    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
	      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
	      flags & V4L2_MBUS_FIELD_EVEN_LOW))
		return -EINVAL;

	decoder->mbus_type = bus_cfg.bus_type;

err:
	of_node_put(ep);
	return ret;
}

static int tvp5150_probe(struct i2c_client *c,
			 const struct i2c_device_id *id)
{
	struct tvp5150 *core;
	struct v4l2_subdev *sd;
	struct device_node *np = c->dev.of_node;
	int res;

	/* Check if the adapter supports the needed features */
@@ -1225,7 +1272,20 @@ static int tvp5150_probe(struct i2c_client *c,
	core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
	if (!core)
		return -ENOMEM;

	sd = &core->sd;

	if (IS_ENABLED(CONFIG_OF) && np) {
		res = tvp5150_parse_dt(core, np);
		if (res) {
			v4l2_err(sd, "DT parsing error: %d\n", res);
			return res;
		}
	} else {
		/* Default to BT.656 embedded sync */
		core->mbus_type = V4L2_MBUS_BT656;
	}

	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);

	res = tvp5150_detect_version(core);