Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a0b201ca authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files

staging: comedi: ni_labpc_cs: fix block comment issues 



Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
WARNING: line over 80 characters

Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a444abfc

drivers/staging/comedi/drivers/ni_labpc_cs.c

+44 −51
Original line number Diff line number Diff line 
/*

    comedi/drivers/ni_labpc_cs.c

    Driver for National Instruments daqcard-1200 boards

    Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess@users.sourceforge.net>



    PCMCIA crap is adapted from dummy_cs.c 1.31 2001/08/24 12:13:13

    from the pcmcia package.

    The initial developer of the pcmcia dummy_cs.c code is David A. Hinds

    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds

    are Copyright (C) 1999 David A. Hinds.



    This program is free software; you can redistribute it and/or modify

    it under the terms of the GNU General Public License as published by

    the Free Software Foundation; either version 2 of the License, or

    (at your option) any later version.



    This program is distributed in the hope that it will be useful,

    but WITHOUT ANY WARRANTY; without even the implied warranty of

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    GNU General Public License for more details.

*/

/*

Driver: ni_labpc_cs

Description: National Instruments Lab-PC (& compatibles)

Author: Frank Mori Hess <fmhess@users.sourceforge.net>

Devices: [National Instruments] DAQCard-1200 (daqcard-1200)

Status: works



Thanks go to Fredrik Lingvall for much testing and perseverance in

helping to debug daqcard-1200 support.



The 1200 series boards have onboard calibration dacs for correcting

analog input/output offsets and gains.  The proper settings for these

caldacs are stored on the board's eeprom.  To read the caldac values

from the eeprom and store them into a file that can be then be used by

comedilib, use the comedi_calibrate program.



Configuration options:

  none



The daqcard-1200 has quirky chanlist requirements

when scanning multiple channels.  Multiple channel scan

sequence must start at highest channel, then decrement down to

channel 0.  Chanlists consisting of all one channel

are also legal, and allow you to pace conversions in bursts.



 * Driver for National Instruments daqcard-1200 boards

 * Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess@users.sourceforge.net>

 *

 * PCMCIA crap is adapted from dummy_cs.c 1.31 2001/08/24 12:13:13

 * from the pcmcia package.

 * The initial developer of the pcmcia dummy_cs.c code is David A. Hinds

 * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds

 * are Copyright (C) 1999 David A. Hinds.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * General Public License for more details.

 */



/*



NI manuals:

340988a (daqcard-1200)



 * Driver: ni_labpc_cs

 * Description: National Instruments Lab-PC (& compatibles)

 * Author: Frank Mori Hess <fmhess@users.sourceforge.net>

 * Devices: [National Instruments] DAQCard-1200 (daqcard-1200)

 * Status: works

 *

 * Thanks go to Fredrik Lingvall for much testing and perseverance in

 * helping to debug daqcard-1200 support.

 *

 * The 1200 series boards have onboard calibration dacs for correcting

 * analog input/output offsets and gains. The proper settings for these

 * caldacs are stored on the board's eeprom. To read the caldac values

 * from the eeprom and store them into a file that can be then be used by

 * comedilib, use the comedi_calibrate program.

 *

 * Configuration options: none

 *

 * The daqcard-1200 has quirky chanlist requirements when scanning multiple

 * channels. Multiple channel scan sequence must start at highest channel,

 * then decrement down to channel 0.  Chanlists consisting of all one channel

 * are also legal, and allow you to pace conversions in bursts.

 *

 * NI manuals:

 *   340988a (daqcard-1200)

 */



#include <linux/module.h>