Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 95a3477f authored by Kevin Hilman's avatar Kevin Hilman
Browse files

davinci: DM355: add base SoC and board support 



In addition, add board support for the DM355 Evaluation Module (EVM)
and the DM355 Leopard board.

Original DM355 EVM support done by Sandeep Paulraj, with significant
updates and improvements by David Brownell.  DM355 Leopord support
done by Koen Kooi.

Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: default avatarKoen Kooi <koen@beagleboard.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
parent f5ce6a67

arch/arm/mach-davinci/Kconfig

+19 −0
Original line number Diff line number Diff line
@@ -10,6 +10,9 @@ comment "DaVinci Core Type" 
config ARCH_DAVINCI_DM644x

	bool "DaVinci 644x based system"



config ARCH_DAVINCI_DM355

        bool "DaVinci 355 based system"



comment "DaVinci Board Type"



config MACH_DAVINCI_EVM
@@ -28,6 +31,22 @@ config MACH_SFFSDR 
	  Say Y here to select the Lyrtech Small Form Factor

	  Software Defined Radio (SFFSDR) board.



config MACH_DAVINCI_DM355_EVM

	bool "TI DM355 EVM"

	default n

	depends on ARCH_DAVINCI_DM355

	help

	  Configure this option to specify the whether the board used

	  for development is a DM355 EVM



config MACH_DM355_LEOPARD

	bool "DM355 Leopard board"

	default n

	depends on ARCH_DAVINCI_DM355

	help

	  Configure this option to specify the whether the board used

	  for development is a DM355 Leopard board.



config DAVINCI_MUX

	bool "DAVINCI multiplexing support"

	depends on ARCH_DAVINCI

arch/arm/mach-davinci/Makefile

+3 −0
Original line number Diff line number Diff line
@@ -12,7 +12,10 @@ obj-$(CONFIG_CP_INTC) += cp_intc.o 


# Chip specific

obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o

obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o



# Board specific

obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o

obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o

obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o

obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o

arch/arm/mach-davinci/board-dm355-evm.c

0 → 100644
+269 −0
Original line number Diff line number Diff line 
/*

 * TI DaVinci EVM board support

 *

 * Author: Kevin Hilman, Deep Root Systems, LLC

 *

 * 2007 (c) MontaVista Software, Inc. This file is licensed under

 * the terms of the GNU General Public License version 2. This program

 * is licensed "as is" without any warranty of any kind, whether express

 * or implied.

 */

#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/init.h>

#include <linux/dma-mapping.h>

#include <linux/platform_device.h>

#include <linux/mtd/mtd.h>

#include <linux/mtd/partitions.h>

#include <linux/mtd/nand.h>

#include <linux/i2c.h>

#include <linux/io.h>

#include <linux/gpio.h>

#include <linux/clk.h>

#include <linux/spi/spi.h>

#include <linux/spi/eeprom.h>



#include <asm/setup.h>

#include <asm/mach-types.h>

#include <asm/mach/arch.h>

#include <asm/mach/map.h>

#include <asm/mach/flash.h>



#include <mach/hardware.h>

#include <mach/dm355.h>

#include <mach/psc.h>

#include <mach/common.h>

#include <mach/i2c.h>

#include <mach/serial.h>

#include <mach/nand.h>



#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000

#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000



/* NOTE:  this is geared for the standard config, with a socketed

 * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you

 * swap chips, maybe with a different block size, partitioning may

 * need to be changed.

 */

#define NAND_BLOCK_SIZE		SZ_128K



static struct mtd_partition davinci_nand_partitions[] = {

	{

		/* UBL (a few copies) plus U-Boot */

		.name		= "bootloader",

		.offset		= 0,

		.size		= 15 * NAND_BLOCK_SIZE,

		.mask_flags	= MTD_WRITEABLE, /* force read-only */

	}, {

		/* U-Boot environment */

		.name		= "params",

		.offset		= MTDPART_OFS_APPEND,

		.size		= 1 * NAND_BLOCK_SIZE,

		.mask_flags	= 0,

	}, {

		.name		= "kernel",

		.offset		= MTDPART_OFS_APPEND,

		.size		= SZ_4M,

		.mask_flags	= 0,

	}, {

		.name		= "filesystem1",

		.offset		= MTDPART_OFS_APPEND,

		.size		= SZ_512M,

		.mask_flags	= 0,

	}, {

		.name		= "filesystem2",

		.offset		= MTDPART_OFS_APPEND,

		.size		= MTDPART_SIZ_FULL,

		.mask_flags	= 0,

	}

	/* two blocks with bad block table (and mirror) at the end */

};



static struct davinci_nand_pdata davinci_nand_data = {

	.mask_chipsel		= BIT(14),

	.parts			= davinci_nand_partitions,

	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),

	.ecc_mode		= NAND_ECC_HW_SYNDROME,

	.options		= NAND_USE_FLASH_BBT,

};



static struct resource davinci_nand_resources[] = {

	{

		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,

		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,

		.flags		= IORESOURCE_MEM,

	}, {

		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,

		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,

		.flags		= IORESOURCE_MEM,

	},

};



static struct platform_device davinci_nand_device = {

	.name			= "davinci_nand",

	.id			= 0,



	.num_resources		= ARRAY_SIZE(davinci_nand_resources),

	.resource		= davinci_nand_resources,



	.dev			= {

		.platform_data	= &davinci_nand_data,

	},

};



static struct davinci_i2c_platform_data i2c_pdata = {

	.bus_freq	= 400	/* kHz */,

	.bus_delay	= 0	/* usec */,

};



static int dm355evm_mmc_gpios = -EINVAL;



static void dm355evm_mmcsd_gpios(unsigned gpio)

{

	gpio_request(gpio + 0, "mmc0_ro");

	gpio_request(gpio + 1, "mmc0_cd");

	gpio_request(gpio + 2, "mmc1_ro");

	gpio_request(gpio + 3, "mmc1_cd");



	/* we "know" these are input-only so we don't

	 * need to call gpio_direction_input()

	 */



	dm355evm_mmc_gpios = gpio;

}



static struct i2c_board_info dm355evm_i2c_info[] = {

	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),

		.platform_data = dm355evm_mmcsd_gpios,

		/* plus irq */ },

	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */

	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */

};



static void __init evm_init_i2c(void)

{

	davinci_init_i2c(&i2c_pdata);



	gpio_request(5, "dm355evm_msp");

	gpio_direction_input(5);

	dm355evm_i2c_info[0].irq = gpio_to_irq(5);



	i2c_register_board_info(1, dm355evm_i2c_info,

			ARRAY_SIZE(dm355evm_i2c_info));

}



static struct resource dm355evm_dm9000_rsrc[] = {

	{

		/* addr */

		.start	= 0x04014000,

		.end	= 0x04014001,

		.flags	= IORESOURCE_MEM,

	}, {

		/* data */

		.start	= 0x04014002,

		.end	= 0x04014003,

		.flags	= IORESOURCE_MEM,

	}, {

		.flags	= IORESOURCE_IRQ

			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,

	},

};



static struct platform_device dm355evm_dm9000 = {

	.name		= "dm9000",

	.id		= -1,

	.resource	= dm355evm_dm9000_rsrc,

	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),

};



static struct platform_device *davinci_evm_devices[] __initdata = {

	&dm355evm_dm9000,

	&davinci_nand_device,

};



static struct davinci_uart_config uart_config __initdata = {

	.enabled_uarts = (1 << 0),

};



static void __init dm355_evm_map_io(void)

{

	davinci_map_common_io();

	dm355_init();

}



/* Don't connect anything to J10 unless you're only using USB host

 * mode *and* have to do so with some kind of gender-bender.  If

 * you have proper Mini-B or Mini-A cables (or Mini-A adapters)

 * the ID pin won't need any help.

 */

#ifdef CONFIG_USB_MUSB_PERIPHERAL

#define USB_ID_VALUE	0	/* ID pulled high; *should* float */

#else

#define USB_ID_VALUE	1	/* ID pulled low */

#endif



static struct spi_eeprom at25640a = {

	.byte_len	= SZ_64K / 8,

	.name		= "at25640a",

	.page_size	= 32,

	.flags		= EE_ADDR2,

};



static struct spi_board_info dm355_evm_spi_info[] __initconst = {

	{

		.modalias	= "at25",

		.platform_data	= &at25640a,

		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */

		.bus_num	= 0,

		.chip_select	= 0,

		.mode		= SPI_MODE_0,

	},

};



static __init void dm355_evm_init(void)

{

	struct clk *aemif;



	gpio_request(1, "dm9000");

	gpio_direction_input(1);

	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);



	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");

	if (IS_ERR(aemif))

		WARN("%s: unable to get AEMIF clock\n", __func__);

	else

		clk_enable(aemif);



	platform_add_devices(davinci_evm_devices,

			     ARRAY_SIZE(davinci_evm_devices));

	evm_init_i2c();

	davinci_serial_init(&uart_config);



	/* NOTE:  NAND flash timings set by the UBL are slower than

	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204

	 * but could be 0x0400008c for about 25% faster page reads.

	 */



	gpio_request(2, "usb_id_toggle");

	gpio_direction_output(2, USB_ID_VALUE);

	/* irlml6401 switches over 1A in under 8 msec */

	setup_usb(500, 8);



	dm355_init_spi0(BIT(0), dm355_evm_spi_info,

			ARRAY_SIZE(dm355_evm_spi_info));

}



static __init void dm355_evm_irq_init(void)

{

	davinci_irq_init();

}



MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")

	.phys_io      = IO_PHYS,

	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,

	.boot_params  = (0x80000100),

	.map_io	      = dm355_evm_map_io,

	.init_irq     = dm355_evm_irq_init,

	.timer	      = &davinci_timer,

	.init_machine = dm355_evm_init,

MACHINE_END

arch/arm/mach-davinci/board-dm355-leopard.c

0 → 100644
+268 −0
Original line number Diff line number Diff line 
/*

 * DM355 leopard board support

 *

 * Based on board-dm355-evm.c

 *

 * This file is licensed under the terms of the GNU General Public

 * License version 2. This program is licensed "as is" without any

 * warranty of any kind, whether express or implied.

 */

#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/init.h>

#include <linux/dma-mapping.h>

#include <linux/platform_device.h>

#include <linux/mtd/mtd.h>

#include <linux/mtd/partitions.h>

#include <linux/mtd/nand.h>

#include <linux/i2c.h>

#include <linux/io.h>

#include <linux/gpio.h>

#include <linux/clk.h>

#include <linux/spi/spi.h>

#include <linux/spi/eeprom.h>



#include <asm/setup.h>

#include <asm/mach-types.h>

#include <asm/mach/arch.h>

#include <asm/mach/map.h>

#include <asm/mach/flash.h>



#include <mach/hardware.h>

#include <mach/dm355.h>

#include <mach/psc.h>

#include <mach/common.h>

#include <mach/i2c.h>

#include <mach/serial.h>

#include <mach/nand.h>



#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000

#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000



/* NOTE:  this is geared for the standard config, with a socketed

 * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you

 * swap chips, maybe with a different block size, partitioning may

 * need to be changed.

 */

#define NAND_BLOCK_SIZE		SZ_128K



static struct mtd_partition davinci_nand_partitions[] = {

	{

		/* UBL (a few copies) plus U-Boot */

		.name		= "bootloader",

		.offset		= 0,

		.size		= 15 * NAND_BLOCK_SIZE,

		.mask_flags	= MTD_WRITEABLE, /* force read-only */

	}, {

		/* U-Boot environment */

		.name		= "params",

		.offset		= MTDPART_OFS_APPEND,

		.size		= 1 * NAND_BLOCK_SIZE,

		.mask_flags	= 0,

	}, {

		.name		= "kernel",

		.offset		= MTDPART_OFS_APPEND,

		.size		= SZ_4M,

		.mask_flags	= 0,

	}, {

		.name		= "filesystem1",

		.offset		= MTDPART_OFS_APPEND,

		.size		= SZ_512M,

		.mask_flags	= 0,

	}, {

		.name		= "filesystem2",

		.offset		= MTDPART_OFS_APPEND,

		.size		= MTDPART_SIZ_FULL,

		.mask_flags	= 0,

	}

	/* two blocks with bad block table (and mirror) at the end */

};



static struct davinci_nand_pdata davinci_nand_data = {

	.mask_chipsel		= BIT(14),

	.parts			= davinci_nand_partitions,

	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),

	.ecc_mode		= NAND_ECC_HW_SYNDROME,

	.options		= NAND_USE_FLASH_BBT,

};



static struct resource davinci_nand_resources[] = {

	{

		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,

		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,

		.flags		= IORESOURCE_MEM,

	}, {

		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,

		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,

		.flags		= IORESOURCE_MEM,

	},

};



static struct platform_device davinci_nand_device = {

	.name			= "davinci_nand",

	.id			= 0,



	.num_resources		= ARRAY_SIZE(davinci_nand_resources),

	.resource		= davinci_nand_resources,



	.dev			= {

		.platform_data	= &davinci_nand_data,

	},

};



static struct davinci_i2c_platform_data i2c_pdata = {

	.bus_freq	= 400	/* kHz */,

	.bus_delay	= 0	/* usec */,

};



static int leopard_mmc_gpio = -EINVAL;



static void dm355leopard_mmcsd_gpios(unsigned gpio)

{

	gpio_request(gpio + 0, "mmc0_ro");

	gpio_request(gpio + 1, "mmc0_cd");

	gpio_request(gpio + 2, "mmc1_ro");

	gpio_request(gpio + 3, "mmc1_cd");



	/* we "know" these are input-only so we don't

	 * need to call gpio_direction_input()

	 */



	leopard_mmc_gpio = gpio;

}



static struct i2c_board_info dm355leopard_i2c_info[] = {

	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),

		.platform_data = dm355leopard_mmcsd_gpios,

		/* plus irq */ },

	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */

	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */

};



static void __init leopard_init_i2c(void)

{

	davinci_init_i2c(&i2c_pdata);



	gpio_request(5, "dm355leopard_msp");

	gpio_direction_input(5);

	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);



	i2c_register_board_info(1, dm355leopard_i2c_info,

			ARRAY_SIZE(dm355leopard_i2c_info));

}



static struct resource dm355leopard_dm9000_rsrc[] = {

	{

		/* addr */

		.start	= 0x04000000,

		.end	= 0x04000001,

		.flags	= IORESOURCE_MEM,

	}, {

		/* data */

		.start	= 0x04000016,

		.end	= 0x04000017,

		.flags	= IORESOURCE_MEM,

	}, {

		.flags	= IORESOURCE_IRQ

			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,

	},

};



static struct platform_device dm355leopard_dm9000 = {

	.name		= "dm9000",

	.id		= -1,

	.resource	= dm355leopard_dm9000_rsrc,

	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),

};



static struct platform_device *davinci_leopard_devices[] __initdata = {

	&dm355leopard_dm9000,

	&davinci_nand_device,

};



static struct davinci_uart_config uart_config __initdata = {

	.enabled_uarts = (1 << 0),

};



static void __init dm355_leopard_map_io(void)

{

	davinci_map_common_io();

	dm355_init();

}



/* Don't connect anything to J10 unless you're only using USB host

 * mode *and* have to do so with some kind of gender-bender.  If

 * you have proper Mini-B or Mini-A cables (or Mini-A adapters)

 * the ID pin won't need any help.

 */

#ifdef CONFIG_USB_MUSB_PERIPHERAL

#define USB_ID_VALUE	0	/* ID pulled high; *should* float */

#else

#define USB_ID_VALUE	1	/* ID pulled low */

#endif



static struct spi_eeprom at25640a = {

	.byte_len	= SZ_64K / 8,

	.name		= "at25640a",

	.page_size	= 32,

	.flags		= EE_ADDR2,

};



static struct spi_board_info dm355_leopard_spi_info[] __initconst = {

	{

		.modalias	= "at25",

		.platform_data	= &at25640a,

		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */

		.bus_num	= 0,

		.chip_select	= 0,

		.mode		= SPI_MODE_0,

	},

};



static __init void dm355_leopard_init(void)

{

	struct clk *aemif;



	gpio_request(9, "dm9000");

	gpio_direction_input(9);

	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);



	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");

	if (IS_ERR(aemif))

		WARN("%s: unable to get AEMIF clock\n", __func__);

	else

		clk_enable(aemif);



	platform_add_devices(davinci_leopard_devices,

			     ARRAY_SIZE(davinci_leopard_devices));

	leopard_init_i2c();

	davinci_serial_init(&uart_config);



	/* NOTE:  NAND flash timings set by the UBL are slower than

	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204

	 * but could be 0x0400008c for about 25% faster page reads.

	 */



	gpio_request(2, "usb_id_toggle");

	gpio_direction_output(2, USB_ID_VALUE);

	/* irlml6401 switches over 1A in under 8 msec */

	setup_usb(500, 8);



	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,

			ARRAY_SIZE(dm355_leopard_spi_info));

}



static __init void dm355_leopard_irq_init(void)

{

	davinci_irq_init();

}



MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")

	.phys_io      = IO_PHYS,

	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,

	.boot_params  = (0x80000100),

	.map_io	      = dm355_leopard_map_io,

	.init_irq     = dm355_leopard_irq_init,

	.timer	      = &davinci_timer,

	.init_machine = dm355_leopard_init,

MACHINE_END

arch/arm/mach-davinci/dm355.c

0 → 100644
+540 −0

File added.

Preview size limit exceeded, changes collapsed.