Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 955178b0 authored by xiaolin's avatar xiaolin Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Respectively define the camera requied 



Because Pronto and Rome use different camera, so define
them respectively to save more unnecessary power.

Change-Id: I2d6324aee7bdff23db95b83ad0f72f927af6abf9
Signed-off-by: default avatarxiaolin <xiaolin@codeaurora.org>
parent c5eb507f

arch/arm64/boot/dts/qcom/apq8009-robot-pronto-refboard.dts

+1 −1
Original line number Original line Diff line number Diff line
@@ -18,7 +18,7 @@ 
#include "apq8009-memory.dtsi"

#include "apq8009-memory.dtsi"

#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>

#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>

#include "msm8909-pm8916-camera.dtsi"

#include "msm8909-pm8916-camera.dtsi"

#include "msm8909-pm8916-camera-sensor-robot.dtsi"

#include "msm8909-pm8916-camera-sensor-robot-pronto.dtsi"





/ {

/ {

	model = "Qualcomm Technologies, Inc. APQ8009 Robot-pronto RefBoard";

	model = "Qualcomm Technologies, Inc. APQ8009 Robot-pronto RefBoard";

arch/arm64/boot/dts/qcom/apq8009-robot-rome-refboard.dts

+1 −1
Original line number Original line Diff line number Diff line
@@ -18,7 +18,7 @@ 
#include "apq8009-memory.dtsi"

#include "apq8009-memory.dtsi"

#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>

#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>

#include "msm8909-pm8916-camera.dtsi"

#include "msm8909-pm8916-camera.dtsi"

#include "msm8909-pm8916-camera-sensor-robot.dtsi"

#include "msm8909-pm8916-camera-sensor-robot-rome.dtsi"





/ {

/ {

	model = "Qualcomm Technologies, Inc. APQ8009 Robot-rome RefBoard";

	model = "Qualcomm Technologies, Inc. APQ8009 Robot-rome RefBoard";

arch/arm64/boot/dts/qcom/msm8909-pm8916-camera-sensor-robot-pronto.dtsi

0 → 100644
+56 −0
Original line number Original line Diff line number Diff line 
/*

 * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&i2c_3 {

	status = "ok";

};



&i2c_3 {



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		cam_vana-supply = <&pm8916_l17>;

		cam_vio-supply = <&pm8916_l6>;

		qcom,cam-vreg-name = "cam_vio","cam_vana";

		qcom,cam-vreg-min-voltage = <1800000 2850000>;

		qcom,cam-vreg-max-voltage = <1800000 2850000>;

		qcom,cam-vreg-op-mode = <0 80000>;

		qcom,cam-vreg-type = <0 0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;

		gpios = <&msm_gpio 26 0>,

			<&msm_gpio 35 0>,

			<&msm_gpio 34 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

			"CAM_RESET",

			"CAM_STANDBY";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};

arch/arm64/boot/dts/qcom/msm8909-pm8916-camera-sensor-robot-rome.dtsi

0 → 100644
+146 −0
Original line number Original line Diff line number Diff line 
/*

 * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&i2c_3 {

	status = "ok";

};



&i2c_3 {

	otp_eeprom: qcom,msm_eeprom@6e{

		status = "ok";

		cell-index = <0>;

		reg = <0x6e>;

		compatible = "msm_eeprom";

		qcom,eeprom-name = "sunny_imx241_otp";

		qcom,slave-addr = <0x6e>;

		qcom,i2c-freq-mode = <1>;



		cam_vdig-supply = <&pm8916_l2>;

		cam_vio-supply = <&pm8916_l6>;

		cam_vana-supply = <&pm8916_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1200000 1800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 1800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000>;

		qcom,cam-vreg-type = <0 0 0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

					&cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep

					&cam_sensor_rear_sleep>;

		gpios = <&msm_gpio 26 0>,

				<&msm_gpio 35 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK", "CAM_RESET";



		qcom,cam-power-seq-type = "sensor_vreg",

						"sensor_vreg",

						"sensor_vreg",

						"sensor_gpio",

						"sensor_clk",

						"sensor_i2c_mux";

		qcom,cam-power-seq-val =  "cam_vana",

						"cam_vdig",

						"cam_vio",

						"sensor_gpio_reset",

						"sensor_cam_mclk",

						"none";

		qcom,cam-power-seq-cfg-val = <2850000 1200000

						1800000 1 24000000 0>;

		qcom,cam-power-seq-delay =   <1 1 1 1 1 0>;



		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;



		qcom,num-blocks = <12>;

		qcom,page0 = <1 0x34C5 2 0x02 1 1>;

		qcom,poll0 = <0 0x0 2 0 1 1>;

		qcom,mem0 = <0 0x0 2 0 1 0>;

		qcom,page1 = <1 0x34C9 2 0x02 1 10>;

		qcom,poll1 = <0 0x0 2 0 1 1>;

		qcom,mem1 = <8 0x3510 2 0 1 0>;

		qcom,page2 = <1 0x34C5 2 0x03 1 1>;

		qcom,poll2 = <0 0x0 2 0 1 1>;

		qcom,mem2 = <0 0x0 2 0 1 0>;

		qcom,page3 = <1 0x34C9 2 0x03 1 10>;

		qcom,poll3 = <0 0x0 2 0 1 1>;

		qcom,mem3 = <8 0x3518 2 0 1 0>;

		qcom,page4 = <1 0x34C5 2 0x06 1 1>;

		qcom,poll4 = <0 0x0 2 0 1 1>;

		qcom,mem4 = <0 0x0 2 0 1 0>;

		qcom,page5 = <1 0x34C9 2 0x06 1 10>;

		qcom,poll5 = <0 0x0 2 0 1 1>;

		qcom,mem5 = <8 0x3530 2 0 1 0>;

		qcom,page6 = <1 0x34C5 2 0x07 1 1>;

		qcom,poll6 = <0 0x0 2 0 1 1>;

		qcom,mem6 = <0 0x0 2 0 1 0>;

		qcom,page7 = <1 0x34C9 2 0x07 1 10>;

		qcom,poll7 = <0 0x0 2 0 1 1>;

		qcom,mem7 = <8 0x3538 2 0 1 0>;

		qcom,page8 = <1 0x34C5 2 0x0A 1 1>;

		qcom,poll8 = <0 0x0 2 0 1 1>;

		qcom,mem8 = <0 0x0 2 0 1 0>;

		qcom,page9 = <1 0x34C9 2 0x0A 1 10>;

		qcom,poll9 = <0 0x0 2 0 1 1>;

		qcom,mem9 = <8 0x3550 2 0 1 0>;

		qcom,page10 = <1 0x34C5 2 0x0B 1 1>;

		qcom,poll10 = <0 0x0 2 0 1 1>;

		qcom,mem10 = <0 0x0 2 0 1 0>;

		qcom,page11 = <1 0x34C9 2 0x0B 1 10>;

		qcom,poll11 = <0 0x0 2 0 1 1>;

		qcom,mem11 = <8 0x3558 2 0 1 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x2>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		cam_vdig-supply = <&pm8916_l2>;

		cam_vana-supply = <&pm8916_l17>;

		cam_vio-supply = <&pm8916_l6>;

		qcom,cam-vreg-type = <0 0 0>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1200000 1800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 1800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;

		gpios = <&msm_gpio 26 0>,

			<&msm_gpio 35 0>,

			<&msm_gpio 34 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

			"CAM_RESET",

			"CAM_STANDBY";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,eeprom-src = <&otp_eeprom>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};