Loading drivers/input/touchscreen/wm97xx-core.c +48 −8 Original line number Original line Diff line number Diff line Loading @@ -261,6 +261,23 @@ void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir, } } EXPORT_SYMBOL_GPL(wm97xx_config_gpio); EXPORT_SYMBOL_GPL(wm97xx_config_gpio); /* * Configure the WM97XX_PRP value to use while system is suspended. * If a value other than 0 is set then WM97xx pen detection will be * left enabled in the configured mode while the system is in suspend, * the device has users and suspend has not been disabled via the * wakeup sysfs entries. * * @wm: WM97xx device to configure * @mode: WM97XX_PRP value to configure while suspended */ void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode) { wm->suspend_mode = mode; device_init_wakeup(&wm->input_dev->dev, mode != 0); } EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode); /* /* * Handle a pen down interrupt. * Handle a pen down interrupt. */ */ Loading Loading @@ -328,18 +345,18 @@ static void wm97xx_pen_irq_worker(struct work_struct *work) * * * We have to disable the codec interrupt in the handler because it * We have to disable the codec interrupt in the handler because it * can take upto 1ms to clear the interrupt source. We schedule a task * can take upto 1ms to clear the interrupt source. We schedule a task * in a work queue to do the actual interaction with the chip (it * in a work queue to do the actual interaction with the chip. The * doesn't matter if we end up reenqueing it before it is executed * interrupt is then enabled again in the slow handler when the source * since we don't touch the chip until it has run). The interrupt is * has been cleared. * then enabled again in the slow handler when the source has been * cleared. */ */ static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id) static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id) { { struct wm97xx *wm = dev_id; struct wm97xx *wm = dev_id; if (!work_pending(&wm->pen_event_work)) { wm->mach_ops->irq_enable(wm, 0); wm->mach_ops->irq_enable(wm, 0); queue_work(wm->ts_workq, &wm->pen_event_work); queue_work(wm->ts_workq, &wm->pen_event_work); } return IRQ_HANDLED; return IRQ_HANDLED; } } Loading @@ -355,7 +372,8 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm) * provided. */ * provided. */ BUG_ON(!wm->mach_ops->irq_enable); BUG_ON(!wm->mach_ops->irq_enable); if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED, if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, "wm97xx-pen", wm)) { "wm97xx-pen", wm)) { dev_err(wm->dev, dev_err(wm->dev, "Failed to register pen down interrupt, polling"); "Failed to register pen down interrupt, polling"); Loading Loading @@ -688,10 +706,32 @@ static int wm97xx_remove(struct device *dev) static int wm97xx_suspend(struct device *dev, pm_message_t state) static int wm97xx_suspend(struct device *dev, pm_message_t state) { { struct wm97xx *wm = dev_get_drvdata(dev); struct wm97xx *wm = dev_get_drvdata(dev); u16 reg; int suspend_mode; if (device_may_wakeup(&wm->input_dev->dev)) suspend_mode = wm->suspend_mode; else suspend_mode = 0; if (wm->input_dev->users) if (wm->input_dev->users) cancel_delayed_work_sync(&wm->ts_reader); cancel_delayed_work_sync(&wm->ts_reader); /* Power down the digitiser (bypassing the cache for resume) */ reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2); reg &= ~WM97XX_PRP_DET_DIG; if (wm->input_dev->users) reg |= suspend_mode; wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg); /* WM9713 has an additional power bit - turn it off if there * are no users or if suspend mode is zero. */ if (wm->id == WM9713_ID2 && (!wm->input_dev->users || !suspend_mode)) { reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000; wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg); } return 0; return 0; } } Loading include/linux/wm97xx.h +3 −0 Original line number Original line Diff line number Diff line Loading @@ -282,6 +282,7 @@ struct wm97xx { unsigned pen_is_down:1; /* Pen is down */ unsigned pen_is_down:1; /* Pen is down */ unsigned aux_waiting:1; /* aux measurement waiting */ unsigned aux_waiting:1; /* aux measurement waiting */ unsigned pen_probably_down:1; /* used in polling mode */ unsigned pen_probably_down:1; /* used in polling mode */ u16 suspend_mode; /* PRP in suspend mode */ }; }; /* /* Loading @@ -297,6 +298,8 @@ void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_sticky sticky, enum wm97xx_gpio_sticky sticky, enum wm97xx_gpio_wake wake); enum wm97xx_gpio_wake wake); void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode); /* codec AC97 IO access */ /* codec AC97 IO access */ int wm97xx_reg_read(struct wm97xx *wm, u16 reg); int wm97xx_reg_read(struct wm97xx *wm, u16 reg); void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val); void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val); Loading Loading
drivers/input/touchscreen/wm97xx-core.c +48 −8 Original line number Original line Diff line number Diff line Loading @@ -261,6 +261,23 @@ void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir, } } EXPORT_SYMBOL_GPL(wm97xx_config_gpio); EXPORT_SYMBOL_GPL(wm97xx_config_gpio); /* * Configure the WM97XX_PRP value to use while system is suspended. * If a value other than 0 is set then WM97xx pen detection will be * left enabled in the configured mode while the system is in suspend, * the device has users and suspend has not been disabled via the * wakeup sysfs entries. * * @wm: WM97xx device to configure * @mode: WM97XX_PRP value to configure while suspended */ void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode) { wm->suspend_mode = mode; device_init_wakeup(&wm->input_dev->dev, mode != 0); } EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode); /* /* * Handle a pen down interrupt. * Handle a pen down interrupt. */ */ Loading Loading @@ -328,18 +345,18 @@ static void wm97xx_pen_irq_worker(struct work_struct *work) * * * We have to disable the codec interrupt in the handler because it * We have to disable the codec interrupt in the handler because it * can take upto 1ms to clear the interrupt source. We schedule a task * can take upto 1ms to clear the interrupt source. We schedule a task * in a work queue to do the actual interaction with the chip (it * in a work queue to do the actual interaction with the chip. The * doesn't matter if we end up reenqueing it before it is executed * interrupt is then enabled again in the slow handler when the source * since we don't touch the chip until it has run). The interrupt is * has been cleared. * then enabled again in the slow handler when the source has been * cleared. */ */ static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id) static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id) { { struct wm97xx *wm = dev_id; struct wm97xx *wm = dev_id; if (!work_pending(&wm->pen_event_work)) { wm->mach_ops->irq_enable(wm, 0); wm->mach_ops->irq_enable(wm, 0); queue_work(wm->ts_workq, &wm->pen_event_work); queue_work(wm->ts_workq, &wm->pen_event_work); } return IRQ_HANDLED; return IRQ_HANDLED; } } Loading @@ -355,7 +372,8 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm) * provided. */ * provided. */ BUG_ON(!wm->mach_ops->irq_enable); BUG_ON(!wm->mach_ops->irq_enable); if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED, if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, "wm97xx-pen", wm)) { "wm97xx-pen", wm)) { dev_err(wm->dev, dev_err(wm->dev, "Failed to register pen down interrupt, polling"); "Failed to register pen down interrupt, polling"); Loading Loading @@ -688,10 +706,32 @@ static int wm97xx_remove(struct device *dev) static int wm97xx_suspend(struct device *dev, pm_message_t state) static int wm97xx_suspend(struct device *dev, pm_message_t state) { { struct wm97xx *wm = dev_get_drvdata(dev); struct wm97xx *wm = dev_get_drvdata(dev); u16 reg; int suspend_mode; if (device_may_wakeup(&wm->input_dev->dev)) suspend_mode = wm->suspend_mode; else suspend_mode = 0; if (wm->input_dev->users) if (wm->input_dev->users) cancel_delayed_work_sync(&wm->ts_reader); cancel_delayed_work_sync(&wm->ts_reader); /* Power down the digitiser (bypassing the cache for resume) */ reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2); reg &= ~WM97XX_PRP_DET_DIG; if (wm->input_dev->users) reg |= suspend_mode; wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg); /* WM9713 has an additional power bit - turn it off if there * are no users or if suspend mode is zero. */ if (wm->id == WM9713_ID2 && (!wm->input_dev->users || !suspend_mode)) { reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000; wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg); } return 0; return 0; } } Loading
include/linux/wm97xx.h +3 −0 Original line number Original line Diff line number Diff line Loading @@ -282,6 +282,7 @@ struct wm97xx { unsigned pen_is_down:1; /* Pen is down */ unsigned pen_is_down:1; /* Pen is down */ unsigned aux_waiting:1; /* aux measurement waiting */ unsigned aux_waiting:1; /* aux measurement waiting */ unsigned pen_probably_down:1; /* used in polling mode */ unsigned pen_probably_down:1; /* used in polling mode */ u16 suspend_mode; /* PRP in suspend mode */ }; }; /* /* Loading @@ -297,6 +298,8 @@ void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_sticky sticky, enum wm97xx_gpio_sticky sticky, enum wm97xx_gpio_wake wake); enum wm97xx_gpio_wake wake); void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode); /* codec AC97 IO access */ /* codec AC97 IO access */ int wm97xx_reg_read(struct wm97xx *wm, u16 reg); int wm97xx_reg_read(struct wm97xx *wm, u16 reg); void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val); void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val); Loading