Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 898eb71c authored by Joe Perches's avatar Joe Perches Committed by Linus Torvalds
Browse files

Add missing newlines to some uses of dev_<level> messages 



Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: default avatarJoe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 6c0286b1

arch/ia64/sn/kernel/xpnet.c

+7 −6
Original line number Original line Diff line number Diff line
@@ -269,8 +269,9 @@ xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg) 
	skb->protocol = eth_type_trans(skb, xpnet_device);

	skb->protocol = eth_type_trans(skb, xpnet_device);

	skb->ip_summed = CHECKSUM_UNNECESSARY;

	skb->ip_summed = CHECKSUM_UNNECESSARY;





	dev_dbg(xpnet, "passing skb to network layer; \n\tskb->head=0x%p "

	dev_dbg(xpnet, "passing skb to network layer\n"

		"skb->data=0x%p skb->tail=0x%p skb->end=0x%p skb->len=%d\n",

		KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p "

		"skb->end=0x%p skb->len=%d\n",

		(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),

		(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),

		skb_end_pointer(skb), skb->len);

		skb_end_pointer(skb), skb->len);
@@ -576,10 +577,10 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) 
		msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);

		msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);

		msg->buf_pa = __pa(start_addr);

		msg->buf_pa = __pa(start_addr);





		dev_dbg(xpnet, "sending XPC message to %d:%d\nmsg->buf_pa="

		dev_dbg(xpnet, "sending XPC message to %d:%d\n"

			"0x%lx, msg->size=%u, msg->leadin_ignore=%u, "

			KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "

			"msg->tailout_ignore=%u\n", dest_partid,

			"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",

			XPC_NET_CHANNEL, msg->buf_pa, msg->size,

			dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,

			msg->leadin_ignore, msg->tailout_ignore);

			msg->leadin_ignore, msg->tailout_ignore);

drivers/block/xsysace.c

+2 −2
Original line number Original line Diff line number Diff line
@@ -390,8 +390,8 @@ static inline void ace_dump_mem(void *base, int len) 
static void ace_dump_regs(struct ace_device *ace)

static void ace_dump_regs(struct ace_device *ace)

{

{

	dev_info(ace->dev, "    ctrl:  %.8x  seccnt/cmd: %.4x      ver:%.4x\n"

	dev_info(ace->dev, "    ctrl:  %.8x  seccnt/cmd: %.4x      ver:%.4x\n"

		 "    status:%.8x  mpu_lba:%.8x  busmode:%4x\n"

		 KERN_INFO "    status:%.8x  mpu_lba:%.8x  busmode:%4x\n"

		 "    error: %.8x  cfg_lba:%.8x  fatstat:%.4x\n",

		 KERN_INFO "    error: %.8x  cfg_lba:%.8x  fatstat:%.4x\n",

		 ace_in32(ace, ACE_CTRL),

		 ace_in32(ace, ACE_CTRL),

		 ace_in(ace, ACE_SECCNTCMD),

		 ace_in(ace, ACE_SECCNTCMD),

		 ace_in(ace, ACE_VERSION),

		 ace_in(ace, ACE_VERSION),

drivers/char/isicom.c

+7 −3
Original line number Original line Diff line number Diff line
@@ -1529,7 +1529,7 @@ static int __devinit reset_card(struct pci_dev *pdev, 
	portcount = inw(base + 0x2);

	portcount = inw(base + 0x2);

	if (!inw(base + 0xe) & 0x1 || (portcount != 0 && portcount != 4 &&

	if (!inw(base + 0xe) & 0x1 || (portcount != 0 && portcount != 4 &&

				portcount != 8 && portcount != 16)) {

				portcount != 8 && portcount != 16)) {

		dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.",

		dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",

			card + 1);

			card + 1);

		retval = -EIO;

		retval = -EIO;

		goto end;

		goto end;
@@ -1622,7 +1622,9 @@ static int __devinit load_firmware(struct pci_dev *pdev, 




		if ((status = inw(base + 0x4)) != 0) {

		if ((status = inw(base + 0x4)) != 0) {

			dev_warn(&pdev->dev, "Card%d rejected load header:\n"

			dev_warn(&pdev->dev, "Card%d rejected load header:\n"

				"Address:0x%x\nCount:0x%x\nStatus:0x%x\n",

				KERN_WARNING "Address:0x%x\n"

				KERN_WARNING "Count:0x%x\n"

				KERN_WARNING "Status:0x%x\n",

				index + 1, frame->addr, frame->count, status);

				index + 1, frame->addr, frame->count, status);

			goto errrelfw;

			goto errrelfw;

		}

		}
@@ -1666,7 +1668,9 @@ static int __devinit load_firmware(struct pci_dev *pdev, 




		if ((status = inw(base + 0x4)) != 0) {

		if ((status = inw(base + 0x4)) != 0) {

			dev_warn(&pdev->dev, "Card%d rejected verify header:\n"

			dev_warn(&pdev->dev, "Card%d rejected verify header:\n"

				"Address:0x%x\nCount:0x%x\nStatus: 0x%x\n",

				KERN_WARNING "Address:0x%x\n"

				KERN_WARNING "Count:0x%x\n"

				KERN_WARNING "Status: 0x%x\n",

				index + 1, frame->addr, frame->count, status);

				index + 1, frame->addr, frame->count, status);

			goto errrelfw;

			goto errrelfw;

		}

		}

drivers/hwmon/adm1026.c

+1 −1
Original line number Original line Diff line number Diff line
@@ -1651,7 +1651,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address, 
		break;

		break;

	default :

	default :

		dev_err(&adapter->dev, ": Internal error, invalid "

		dev_err(&adapter->dev, ": Internal error, invalid "

			"kind (%d)!", kind);

			"kind (%d)!\n", kind);

		err = -EFAULT;

		err = -EFAULT;

		goto exitfree;

		goto exitfree;

	}

	}

drivers/hwmon/lm63.c

+1 −1
Original line number Original line Diff line number Diff line
@@ -533,7 +533,7 @@ static void lm63_init_client(struct i2c_client *client) 




	/* Start converting if needed */

	/* Start converting if needed */

	if (data->config & 0x40) { /* standby */

	if (data->config & 0x40) { /* standby */

		dev_dbg(&client->dev, "Switching to operational mode");

		dev_dbg(&client->dev, "Switching to operational mode\n");

		data->config &= 0xA7;

		data->config &= 0xA7;

		i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1,

		i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1,

					  data->config);

					  data->config);