Camera kernel patching from P codebase (88ed7dbd) · Commits · e / devices / android_kernel_fairphone_FP3

arch/arm64/boot/dts/qcom/msm8953-camera-sensor-mtp.dtsi

100644 → 100755

+132 −161

Original line number	Diff line number	Diff line
		@@ -20,7 +20,7 @@
		reg = <0x0>;
		compatible = "qcom,actuator";
		qcom,cci-master = <0>;
		cam_vaf-supply = <&pm8953_l17>;
		// cam_vaf-supply = <&pm8953_l17>;
		qcom,cam-vreg-name = "cam_vaf";
		qcom,cam-vreg-min-voltage = <2850000>;
		qcom,cam-vreg-max-voltage = <2850000>;
		@@ -44,113 +44,110 @@
		compatible = "qcom,eeprom";
		qcom,cci-master = <0>;
		reg = <0x0>;
		cam_vio-supply = <&pm8953_l6>;
		cam_vdig-supply = <&pm8953_l2>;
		cam_vaf-supply = <&pm8953_l17>;
		qcom,cam-vreg-name = "cam_vio", "cam_vdig", "cam_vaf";
		qcom,cam-vreg-min-voltage = <0 1200000 2850000>;
		qcom,cam-vreg-max-voltage = <0 1200000 2850000>;
		qcom,cam-vreg-op-mode = <0 105000 100000>;
		cam_vana-supply = <&pm8953_l22>;
		cam_v_custom1-supply = <&pm8953_l2>;
		qcom,cam-vreg-name = "cam_vana", "cam_v_custom1";
		qcom,cam-vreg-min-voltage = <2800000 1175000>;
		qcom,cam-vreg-max-voltage = <2800000 1175000>;
		qcom,cam-vreg-op-mode = <80000 105000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_default
		&cam_sensor_rear_default
		&cam_sensor_rear_vana>;
		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep
		&cam_sensor_rear_vana_sleep>;
		pinctrl-0 = <&cam_sensor_mclk0_default &cam_sensor_rear_default>;
		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;
		gpios = <&tlmm 26 0>,
		<&tlmm 40 0>,
		<&tlmm 39 0>,
		<&tlmm 134 0>;
		<&tlmm 130 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-vana = <3>;
		qcom,gpio-req-tbl-num = <0 1 2 3>;
		qcom,gpio-req-tbl-flags = <1 0 0 0>;
		qcom,gpio-vio = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
		"CAM_RESET0",
		"CAM_STANDBY0",
		"CAM_VANA";
		"CAM_VIO";
		qcom,sensor-position = <0>;
		qcom,sensor-mode = <0>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk0_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk0_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <19200000 0>;
		qcom,clock-rates = <24000000 0>;
		};

		/<2018/10/18-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]Modified for new front camera device driver S5K4H7YX. /
		eeprom1: qcom,eeprom@1 {
		cell-index = <1>;
		reg = <0x1>;
		compatible = "qcom,eeprom";
		qcom,cci-master = <1>;
		cam_vdig-supply = <&pm8953_l23>;
		cam_vio-supply = <&pm8953_l6>;
		cam_vana-supply = <&pm8953_l22>;
		cam_vaf-supply = <&pm8953_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
		reg = <0x1>;

		#if 0
		qcom,eeprom-name = "samsung_s5k4h7yx";
		qcom,slave-addr = <0x20>;
		qcom,num-blocks = <2>;

		qcom,page0 = <1 0x0100 2 0x01 1 1>;
		qcom,poll0 = <0 0x0 2 0x0 1 0>;
		qcom,mem0 = <0 0x0 2 0x0 1 0>;
		#endif

		/* cam_vio-supply = <&cam_vio_gpio_regulator>; / / IOVDD */
		cam_vana-supply = <&pm8953_l22>; /* AVDD */
		/* cam_vdig-supply = <&cam_front_dvdd_gpio_regulator>; / / DVDD */
		/* cam_vaf-supply = <&pm8953_l17>; / / AFVDD is not usage */
		qcom,cam-vreg-name = "cam_vana"; /* "cam_vio", "cam_vana", "cam_vdig"; */
		qcom,cam-vreg-min-voltage = <2800000>;
		qcom,cam-vreg-max-voltage = <2800000>;
		qcom,cam-vreg-op-mode = <80000>;
		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_default
		&cam_sensor_front1_default>;
		&cam_sensor_front1_default
		&cam_sensor_front1_vdig_default
		&cam_sensor_front1_vio_default>;
		pinctrl-1 = <&cam_sensor_mclk1_sleep
		&cam_sensor_front1_sleep>;
		&cam_sensor_front1_sleep
		&cam_sensor_front1_vdig_sleep
		&cam_sensor_front1_vio_sleep>;

		/<2018/11/14-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]VOI control pin.PCBA EP0 is GPIO123;EP1 and above is GPIO130 /
		gpios = <&tlmm 27 0>,
		<&tlmm 129 0>,
		<&tlmm 46 0>,
		#if 1
		<&tlmm 130 0>;
		#else /* PCBA EP0 */
		<&tlmm 123 0>;
		#endif
		/>2018/11/14-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][] /
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-vdig = <2>;
		qcom,gpio-vio = <3>;
		qcom,gpio-req-tbl-num = <0 1 2 3>;
		qcom,gpio-req-tbl-flags = <1 0 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
		"CAM_RESET2",
		"CAM_STANDBY2";
		qcom,sensor-position = <1>;
		qcom,sensor-mode = <0>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk1_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk1_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <19200000 0>;
		};
		"CAM_VDIG2",
		"CAM_VIO2";

		eeprom2: qcom,eeprom@2 {
		cell-index = <2>;
		compatible = "qcom,eeprom";
		qcom,cci-master = <1>;
		reg = <0x2>;
		cam_vdig-supply = <&pm8953_l23>;
		cam_vana-supply = <&pm8953_l22>;
		cam_vio-supply = <&pm8953_l6>;
		cam_vaf-supply = <&pm8953_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_default
		&cam_sensor_front_default>;
		pinctrl-1 = <&cam_sensor_mclk2_sleep
		&cam_sensor_front_sleep>;
		gpios = <&tlmm 28 0>,
		<&tlmm 131 0>,
		<&tlmm 132 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
		"CAM_RESET1",
		"CAM_STANDBY1";
		status = "ok";
		clocks = <&clock_gcc clk_mclk2_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk2_clk>;
		#if 1
		qcom,cam-power-seq-val = "sensor_gpio_reset",
		"cam_vana", "sensor_gpio_vdig",
		"sensor_gpio_vio", "sensor_gpio_reset",
		"sensor_cam_mclk";
		qcom,cam-power-seq-type = "sensor_gpio",
		"sensor_vreg", "sensor_gpio",
		"sensor_gpio", "sensor_gpio",
		"sensor_clk";
		qcom,cam-power-seq-cfg-val = <0 1 1 1 1 24000000>;
		qcom,cam-power-seq-delay = <5 1 1 3 3 10>; /* <1 1 1 1 1 10>; */
		#endif
		clock-names = "cam_src_clk", "cam_clk";
		clocks = <&clock_gcc clk_mclk1_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk1_clk>;
		qcom,clock-rates = <19200000 0>;
		};
		/>2018/10/18-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]. /

		camera0: qcom,camera@0 {
		cell-index = <0>;
		@@ -162,16 +159,15 @@
		qcom,led-flash-src = <&led_flash0>;
		qcom,eeprom-src = <&eeprom0>;
		qcom,actuator-src = <&actuator0>;
		cam_vio-supply = <&pm8953_l6>;
		cam_vdig-supply = <&pm8953_l2>;
		cam_vaf-supply = <&pm8953_l17>;
		// cam_vio-supply = <&pm8953_l6>;
		// cam_vdig-supply = <&pm8953_l2>;
		// cam_vaf-supply = <&pm8953_l17>;
		cam_vana-supply = <&pm8953_l22>;
		cam_v_custom1-supply = <&pm8953_l23>;
		qcom,cam-vreg-name = "cam_vio", "cam_vdig", "cam_vaf",
		"cam_vana", "cam_v_custom1";
		qcom,cam-vreg-min-voltage = <0 1200000 2850000 2800000 1200000>;
		qcom,cam-vreg-max-voltage = <0 1200000 2850000 2800000 1200000>;
		qcom,cam-vreg-op-mode = <0 105000 100000 80000 105000>;
		cam_v_custom1-supply = <&pm8953_l2>;
		qcom,cam-vreg-name = "cam_vana", "cam_v_custom1";
		qcom,cam-vreg-min-voltage = <2800000 1175000>;
		qcom,cam-vreg-max-voltage = <2800000 1175000>;
		qcom,cam-vreg-op-mode = <80000 105000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_default
		&cam_sensor_rear_default
		@@ -180,17 +176,17 @@
		&cam_sensor_rear_vana_sleep>;
		gpios = <&tlmm 26 0>,
		<&tlmm 40 0>,
		<&tlmm 39 0>,
		<&tlmm 134 0>;
		<&tlmm 130 0>,
		<&tlmm 128 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-vana = <3>;
		qcom,gpio-vio = <2>;
		qcom,gpio-vaf = <3>;
		qcom,gpio-req-tbl-num = <0 1 2 3>;
		qcom,gpio-req-tbl-flags = <1 0 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
		"CAM_RESET0",
		"CAM_STANDBY0",
		"CAM_VANA";
		"CAM_VIO",
		"CAM_VAF";
		qcom,sensor-position = <0>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		@@ -201,90 +197,65 @@
		qcom,clock-rates = <24000000 0>;
		};

		qcom,camera@1 {
		cell-index = <1>;
		compatible = "qcom,camera";
		reg = <0x1>;
		qcom,csiphy-sd-index = <1>;
		qcom,csid-sd-index = <1>;
		qcom,mount-angle = <90>;
		qcom,eeprom-src = <&eeprom2>;
		qcom,actuator-src = <&actuator1>;
		cam_vdig-supply = <&pm8953_l23>;
		cam_vana-supply = <&pm8953_l22>;
		cam_vio-supply = <&pm8953_l6>;
		cam_vaf-supply = <&pm8953_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_default
		&cam_sensor_front_default>;
		pinctrl-1 = <&cam_sensor_mclk2_sleep
		&cam_sensor_front_sleep>;
		gpios = <&tlmm 28 0>,
		<&tlmm 131 0>,
		<&tlmm 132 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
		"CAM_RESET1",
		"CAM_STANDBY1";
		qcom,sensor-position = <0x100>;
		qcom,sensor-mode = <1>;
		qcom,cci-master = <1>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk2_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk2_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
		};

		qcom,camera@2 {
		/<2018/10/18-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]Modified for new front camera device driver S5K4H7YX. /
		camera2: qcom,camera@2 {
		cell-index = <2>;
		compatible = "qcom,camera";
		reg = <0x02>;
		qcom,csiphy-sd-index = <2>;
		qcom,csid-sd-index = <2>;
		qcom,mount-angle = <90>;
		qcom,csid-sd-index = <1>; /* SDM450 support 2 CSID cores. MSM8953 is 3 CSID cores */
		qcom,mount-angle = <270>; /* <90>; */
		qcom,eeprom-src = <&eeprom1>;
		qcom,actuator-src = <&actuator1>;
		cam_vdig-supply = <&pm8953_l23>;
		cam_vio-supply = <&pm8953_l6>;
		/* qcom,actuator-src = <&actuator1>; / / The auto focus is not support */

		/* cam_vio-supply = <&cam_vio_gpio_regulator>; */
		cam_vana-supply = <&pm8953_l22>;
		cam_vaf-supply = <&pm8953_l17>;
		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
		"cam_vaf";
		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;
		qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
		/* cam_vdig-supply = <&cam_front_dvdd_gpio_regulator>; */
		/* cam_vaf-supply = <&pm8953_l17>; / / The AFVDD is not support */
		qcom,cam-vreg-name = "cam_vana";
		qcom,cam-vreg-min-voltage = <2800000>;
		qcom,cam-vreg-max-voltage = <2800000>;
		qcom,cam-vreg-op-mode = <80000>;
		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_default
		&cam_sensor_front1_default>;
		&cam_sensor_front1_default
		&cam_sensor_front1_vdig_default
		&cam_sensor_front1_vio_default>;
		pinctrl-1 = <&cam_sensor_mclk1_sleep
		&cam_sensor_front1_sleep>;
		&cam_sensor_front1_sleep
		&cam_sensor_front1_vdig_sleep
		&cam_sensor_front1_vio_sleep>;

		/<2018/11/14-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]VOI control pin.PCBA EP0 is GPIO123;EP1 and above is GPIO130 /
		gpios = <&tlmm 27 0>,
		<&tlmm 129 0>,
		<&tlmm 46 0>,
		#if 1
		<&tlmm 130 0>;
		#else /* PCBA EP0 */
		<&tlmm 123 0>;
		#endif
		/>2018/11/14-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][] /
		qcom,gpio-reset = <1>;
		qcom,gpio-standby = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-vdig = <2>;
		qcom,gpio-vio = <3>;
		qcom,gpio-req-tbl-num = <0 1 2 3>;
		qcom,gpio-req-tbl-flags = <1 0 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
		"CAM_RESET2",
		"CAM_STANDBY2";
		"CAM_VDIG2",
		"CAM_VIO2";

		qcom,sensor-position = <1>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <1>;
		status = "ok";
		clock-names = "cam_src_clk", "cam_clk";
		clocks = <&clock_gcc clk_mclk1_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk1_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
		};
		/>2018/10/18-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]. /
		};

arch/arm64/boot/dts/qcom/msm8953-pinctrl.dtsi

+102 −6

Original line number	Diff line number	Diff line
		@@ -118,7 +118,9 @@

		config {
		pins = "gpio31", "gpio32";
		drive-strength = <2>; /* 2 MA */
		/<2019/05/10-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]Pull up the strength level when camera cannot detected sometimes /
		drive-strength = <4>; /* 2 MA */
		/>2019/05/10-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][] /
		bias-disable; /* No PULL */
		};
		};
		@@ -229,12 +231,12 @@
		cam_sensor_rear_vana: cam_sensor_rear_vdig {
		/* VDIG */
		mux {
		pins = "gpio134";
		pins = "gpio128";
		function = "gpio";
		};

		config {
		pins = "gpio134";
		pins = "gpio128";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		@@ -243,12 +245,12 @@
		cam_sensor_rear_vana_sleep: cam_sensor_rear_vdig_sleep {
		/* VDIG */
		mux {
		pins = "gpio134";
		pins = "gpio128";
		function = "gpio";
		};

		config {
		pins = "gpio134";
		pins = "gpio128";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		@@ -265,7 +267,9 @@
		config {
		pins = "gpio27";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		/<2019/05/10-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]Pull up the MIPI CLK strength level when camera cannot detected sometimes /
		drive-strength = <8>; /* <2>; / / 2 MA */
		/>2019/05/10-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][] /
		};
		};

		@@ -342,15 +346,98 @@
		};
		};

		/<2018/10/18-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]Modified for new front camera device driver S5K4H7YX. /
		/<2018/11/14-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]VOI control pin.PCBA EP0 is GPIO123;EP1 and above is GPIO130 /
		cam_sensor_front1_vio_default: cam_sensor_front1_vio_default {
		/* CAM IOVDD */
		mux {
		#if 1
		pins = "gpio130";
		#else /* PCBA EP0 */
		pins = "gpio123";
		#endif
		function = "gpio";
		};

		config {
		#if 1
		pins = "gpio130";
		#else /* PCBA EP0 */
		pins = "gpio123";
		#endif
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_front1_vio_sleep: cam_sensor_front1_vio_sleep {
		/* CAM IOVDD */
		mux {
		#if 1
		pins = "gpio130";
		#else /* PCBA EP0 */
		pins = "gpio123";
		#endif
		function = "gpio";
		};

		config {
		#if 1
		pins = "gpio130";
		#else /* PCBA EP0 */
		pins = "gpio123";
		#endif
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};
		/>2018/11/14-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][] /

		cam_sensor_front1_vdig_default: cam_sensor_front1_vdig_default {
		/* CAM DVDD */
		mux {
		pins = "gpio46";
		function = "gpio";
		};

		config {
		pins = "gpio46";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_front1_vdig_sleep: cam_sensor_front1_vdig_sleep {
		/* CAM DVDD */
		mux {
		pins = "gpio46";
		function = "gpio";
		};

		config {
		pins = "gpio46";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_front1_default: cam_sensor_front1_default {
		/* RESET, STANDBY */
		mux {
		#if 1
		pins = "gpio129"; /* Only Reset,Non-standby GPIO */
		#else /* Qualcomm default */
		pins = "gpio129", "gpio130";
		#endif
		function = "gpio";
		};

		config {
		#if 1
		pins = "gpio129"; /* Only Reset,Non-standby GPIO */
		#else /* Qualcomm default */
		pins = "gpio129", "gpio130";
		#endif
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		@@ -359,16 +446,25 @@
		cam_sensor_front1_sleep: cam_sensor_front1_sleep {
		/* RESET, STANDBY */
		mux {
		#if 1
		pins = "gpio129"; /* Only Reset,Non-standby GPIO */
		#else /* Qualcomm default */
		pins = "gpio129", "gpio130";
		#endif
		function = "gpio";
		};

		config {
		#if 1
		pins = "gpio129"; /* Only Reset,Non-standby GPIO */
		#else /* Qualcomm default */
		pins = "gpio129", "gpio130";
		#endif
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};
		/>2018/10/18-Yuting Shih.[FAIRPHONE][MISC][COMMON][CAMERA][][]. /

		pmx_adv7533_int: pmx_adv7533_int {
		adv7533_int_active: adv7533_int_active {

drivers/media/platform/msm/camera_v2/sensor/actuator/msm_actuator.c

100644 → 100755

+18 −1

Original line number	Diff line number	Diff line
		@@ -31,6 +31,9 @@ DEFINE_MSM_MUTEX(msm_actuator_mutex);
		#define PARK_LENS_SMALL_STEP 3
		#define MAX_QVALUE 4096

		extern int nActuatorAK7374;
		extern int nActuatorDW9800;

		static struct v4l2_file_operations msm_actuator_v4l2_subdev_fops;
		static int32_t msm_actuator_power_up(struct msm_actuator_ctrl_t *a_ctrl);
		static int32_t msm_actuator_power_down(struct msm_actuator_ctrl_t *a_ctrl);
		@@ -118,7 +121,21 @@ static void msm_actuator_parse_i2c_params(struct msm_actuator_ctrl_t *a_ctrl,
		write_arr[i].data_shift) \|
		((hw_dword & write_arr[i].hw_mask) >>
		write_arr[i].hw_shift);

		//[Camera] Modify for IMX363 module AF Person Liu 20190509 S
		//[Camera] Modify for IMX363 module AF Frank Cheng 20191225 S
		//[Camera] Modify for S5KGM1SP module AF Frank Cheng 20200427 S
		/*
		pr_err("%s:%d nActuatorAK7374: %d\n",
		__func__, __LINE__,
		nActuatorAK7374);
		pr_err("%s:%d nActuatorDW9800: %d\n",
		__func__, __LINE__,
		nActuatorDW9800);
		*/
		if(nActuatorAK7374 == 0 && nActuatorDW9800 == 0)value = abs(1023-value);
		//[Camera] Modify for S5KGM1SP module AF Frank Cheng 20200427 E
		//[Camera] Modify for IMX363 module AF Frank Cheng 20191225 E
		//[Camera] Modify for IMX363 module AF Person Liu 20190509 E
		if (write_arr[i].reg_addr != 0xFFFF) {
		i2c_byte1 = write_arr[i].reg_addr;
		i2c_byte2 = value;

drivers/media/platform/msm/camera_v2/sensor/msm_sensor_driver.c

100644 → 100755

+20 −0

Original line number	Diff line number	Diff line
		@@ -18,6 +18,7 @@
		#include "msm_cci.h"
		#include "msm_camera_dt_util.h"
		#include "msm_sensor_driver.h"
		#include "../actuator/msm_actuator.h"

		/* Logging macro */
		#undef CDBG
		@@ -25,6 +26,9 @@

		#define SENSOR_MAX_MOUNTANGLE (360)

		int nActuatorAK7374 = 0;
		int nActuatorDW9800 = 0;

		static struct v4l2_file_operations msm_sensor_v4l2_subdev_fops;
		static int32_t msm_sensor_driver_platform_probe(struct platform_device *pdev);

		@@ -1136,7 +1140,23 @@ int32_t msm_sensor_driver_probe(void *setting,
		goto free_camera_info;
		}

		pr_err("%s:%d s_ctrl->sensordata->actuator_name: %s\n",
		__func__, __LINE__,
		s_ctrl->sensordata->actuator_name);
		if(strcmp(s_ctrl->sensordata->actuator_name, "ak7374") == 0){
		nActuatorAK7374 = 1;
		pr_err("%s:%d nActuatorAK7374: %d\n",
		__func__, __LINE__,
		nActuatorAK7374);
		}else if(strcmp(s_ctrl->sensordata->actuator_name, "dw9800") == 0){
		nActuatorDW9800 = 1;
		pr_err("%s:%d nActuatorDW9800: %d\n",
		__func__, __LINE__,
		nActuatorDW9800);
		}

		pr_err("%s probe succeeded", slave_info->sensor_name);
		if(strcmp(slave_info->sensor_name, "imx363") == 0)pr_err("imx363 compare success");

		s_ctrl->bypass_video_node_creation =
		slave_info->bypass_video_node_creation;