Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 861f9729 authored by Karthik Anantha Ram's avatar Karthik Anantha Ram
Browse files

ARM: dts: msm: Correct regulator sources for sdm845 



Add vaf regulator for eeprom front & rear device.

Change-Id: I0b72b658df5ff3940f81b3ac366b6a0219c52b85
Signed-off-by: default avatarKarthik Anantha Ram <kartanan@codeaurora.org>
parent 16fbb913

arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi

+13 −7
Original line number Diff line number Diff line
@@ -122,8 +122,9 @@ 
		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_rear_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;
@@ -165,8 +166,9 @@ 
		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vdig", "cam_vio", "cam_vana",

			"cam_clk";

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1050000 0 3312000 0>;

		rgltr-max-voltage = <1050000 0 3600000 0>;
@@ -179,14 +181,17 @@ 
				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

			<&tlmm 8 0>,

			<&tlmm 27 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-vaf = <3>;

		gpio-req-tbl-num = <0 1 2 3>;

		gpio-req-tbl-flags = <1 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1";

					"CAM_VANA1",

					"CAM_VAF";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <1>;
@@ -205,8 +210,9 @@ 
		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;

arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi

+13 −7
Original line number Diff line number Diff line
@@ -122,8 +122,9 @@ 
		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_rear_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;
@@ -165,8 +166,9 @@ 
		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vdig", "cam_vio", "cam_vana",

			"cam_clk";

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1050000 0 3312000 0>;

		rgltr-max-voltage = <1050000 0 3600000 0>;
@@ -179,14 +181,17 @@ 
				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

			<&tlmm 8 0>,

			<&tlmm 27 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-vaf = <3>;

		gpio-req-tbl-num = <0 1 2 3>;

		gpio-req-tbl-flags = <1 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1";

					"CAM_VANA1",

					"CAM_VAF";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <1>;
@@ -205,8 +210,9 @@ 
		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;