Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 86123115 authored by Jigarkumar Zala's avatar Jigarkumar Zala Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: add camera sensor devices for sdm845 



Add camera sensor devices support for CSIPHY,CCI,
Image Sensor, Actuator, OIS, EEPROM, Flash. Also,
add pinctrl support for CCI, MCLCK, MSM and PMIC
gpios.

CRs-Fixed: 2020058
Change-Id: I5889163b539c5b379d97c0022ad66112bdf975b2
Signed-off-by: default avatarJigarkumar Zala <jzala@codeaurora.org>
parent 13ce0881

arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi

0 → 100644
+352 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	led_flash_rear: qcom,camera-flash@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi8998_flash0 &pmi8998_flash1>;

		qcom,torch-source = <&pmi8998_torch0 &pmi8998_torch1>;

		qcom,switch-source = <&pmi8998_switch0>;

		status = "ok";

	};



	led_flash_front: qcom,camera-flash@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi8998_flash2>;

		qcom,torch-source = <&pmi8998_torch2>;

		qcom,switch-source = <&pmi8998_switch1>;

		status = "ok";

	};



	actuator_regulator: gpio-regulator@0 {

		compatible = "regulator-fixed";

		reg = <0x0>;

		regulator-name = "actuator_regulator";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		regulator-enable-ramp-delay = <100>;

		enable-active-high;

		gpio = <&tlmm 27 0>;

		vin-supply = <&pmi8998_bob>;

	};



	camera_rear_ldo: gpio-regulator@1 {

		compatible = "regulator-fixed";

		reg = <0x1>;

		regulator-name = "camera_rear_ldo";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		regulator-enable-ramp-delay = <135>;

		enable-active-high;

		gpio = <&pm8998_gpios 12 0>;

		pinctrl-names = "default";

		pinctrl-0 = <&camera_rear_dvdd_en_default>;

		vin-supply = <&pm8998_s3>;

	};



	camera_ldo: gpio-regulator@2 {

		compatible = "regulator-fixed";

		reg = <0x2>;

		regulator-name = "camera_ldo";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		regulator-enable-ramp-delay = <233>;

		enable-active-high;

		gpio = <&pm8998_gpios 9 0>;

		pinctrl-names = "default";

		pinctrl-0 = <&camera_dvdd_en_default>;

		vin-supply = <&pm8998_s3>;

	};

};



&cci {

	actuator_rear: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&actuator_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

	};



	actuator_front: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cam_vaf-supply = <&actuator_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

	};



	ois_rear: qcom,ois@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,ois";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&actuator_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

		status = "disabled";

	};



	eeprom_rear: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_rear_ldo>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 80 0>,

			<&tlmm 79 0>,

			<&tlmm 27 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-vaf = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA0",

					"CAM_VAF";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	eeprom_rear_aux: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vdig-supply = <&camera_ldo>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1050000 0 3312000>;

		qcom,cam-vreg-max-voltage = <1050000 0 3600000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	eeprom_front: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>,

			<&tlmm 8 0>,

			<&tlmm 27 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-vaf = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VANA2",

					"CAM_VAF";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	qcom,cam-sensor@0 {

		cell-index = <0>;

		compatible = "qcom,cam-sensor";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,sensor-position-roll = <90>;

		qcom,sensor-position-pitch = <0>;

		qcom,sensor-position-yaw = <180>;

		qcom,led-flash-src = <&led_flash_rear>;

		qcom,actuator-src = <&actuator_rear>;

		qcom,ois-src = <&ois_rear>;

		qcom,eeprom-src = <&eeprom_rear>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_rear_ldo>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 80 0>,

			<&tlmm 79 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	qcom,cam-sensor@1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,sensor-position-roll = <90>;

		qcom,sensor-position-pitch = <0>;

		qcom,sensor-position-yaw = <180>;

		qcom,eeprom-src = <&eeprom_rear_aux>;

		cam_vdig-supply = <&camera_ldo>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1050000 0 3312000>;

		qcom,cam-vreg-max-voltage = <1050000 0 3600000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	qcom,cam-sensor@2 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,sensor-position-roll = <90>;

		qcom,sensor-position-pitch = <0>;

		qcom,sensor-position-yaw = <0>;

		qcom,eeprom-src = <&eeprom_front>;

		qcom,actuator-src = <&actuator_front>;

		qcom,led-flash-src = <&led_flash_front>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VANA1";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};

};

arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi

0 → 100644
+352 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	led_flash_rear: qcom,camera-flash@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi8998_flash0 &pmi8998_flash1>;

		qcom,torch-source = <&pmi8998_torch0 &pmi8998_torch1>;

		qcom,switch-source = <&pmi8998_switch0>;

		status = "ok";

	};



	led_flash_front: qcom,camera-flash@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi8998_flash2>;

		qcom,torch-source = <&pmi8998_torch2>;

		qcom,switch-source = <&pmi8998_switch1>;

		status = "ok";

	};



	actuator_regulator: gpio-regulator@0 {

		compatible = "regulator-fixed";

		reg = <0x0>;

		regulator-name = "actuator_regulator";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		regulator-enable-ramp-delay = <100>;

		enable-active-high;

		gpio = <&tlmm 27 0>;

		vin-supply = <&pmi8998_bob>;

	};



	camera_rear_ldo: gpio-regulator@1 {

		compatible = "regulator-fixed";

		reg = <0x1>;

		regulator-name = "camera_rear_ldo";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		regulator-enable-ramp-delay = <135>;

		enable-active-high;

		gpio = <&pm8998_gpios 12 0>;

		pinctrl-names = "default";

		pinctrl-0 = <&camera_rear_dvdd_en_default>;

		vin-supply = <&pm8998_s3>;

	};



	camera_ldo: gpio-regulator@2 {

		compatible = "regulator-fixed";

		reg = <0x2>;

		regulator-name = "camera_ldo";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		regulator-enable-ramp-delay = <233>;

		enable-active-high;

		gpio = <&pm8998_gpios 9 0>;

		pinctrl-names = "default";

		pinctrl-0 = <&camera_dvdd_en_default>;

		vin-supply = <&pm8998_s3>;

	};

};



&cci {

	actuator_rear: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&actuator_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

	};



	actuator_front: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cam_vaf-supply = <&actuator_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

	};



	ois_rear: qcom,ois@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,ois";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&actuator_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

		status = "disabled";

	};



	eeprom_rear: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_rear_ldo>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 80 0>,

			<&tlmm 79 0>,

			<&tlmm 27 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-vaf = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA0",

					"CAM_VAF";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	eeprom_rear_aux: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vdig-supply = <&camera_ldo>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1050000 0 3312000>;

		qcom,cam-vreg-max-voltage = <1050000 0 3600000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	eeprom_front: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>,

			<&tlmm 8 0>,

			<&tlmm 27 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-vaf = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VANA2",

					"CAM_VAF";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	qcom,cam-sensor@0 {

		cell-index = <0>;

		compatible = "qcom,cam-sensor";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,sensor-position-roll = <90>;

		qcom,sensor-position-pitch = <0>;

		qcom,sensor-position-yaw = <180>;

		qcom,led-flash-src = <&led_flash_rear>;

		qcom,actuator-src = <&actuator_rear>;

		qcom,ois-src = <&ois_rear>;

		qcom,eeprom-src = <&eeprom_rear>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_rear_ldo>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 80 0>,

			<&tlmm 79 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	qcom,cam-sensor@1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,sensor-position-roll = <90>;

		qcom,sensor-position-pitch = <0>;

		qcom,sensor-position-yaw = <180>;

		qcom,eeprom-src = <&eeprom_rear_aux>;

		cam_vdig-supply = <&camera_ldo>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1050000 0 3312000>;

		qcom,cam-vreg-max-voltage = <1050000 0 3600000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};



	qcom,cam-sensor@2 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,sensor-position-roll = <90>;

		qcom,sensor-position-pitch = <0>;

		qcom,sensor-position-yaw = <0>;

		qcom,eeprom-src = <&eeprom_front>;

		qcom,actuator-src = <&actuator_front>;

		qcom,led-flash-src = <&led_flash_front>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VANA1";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

	};

};

arch/arm64/boot/dts/qcom/sdm845-camera.dtsi

+209 −0

File changed.

Preview size limit exceeded, changes collapsed.

arch/arm64/boot/dts/qcom/sdm845-cdp.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -11,7 +11,7 @@ 
 */



#include <dt-bindings/gpio/gpio.h>



#include "sdm845-camera-sensor-cdp.dtsi"

&soc {

	sound-tavil {

		qcom,us-euro-gpios = <&tavil_us_euro_sw>;

arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -11,7 +11,7 @@ 
 */



#include <dt-bindings/gpio/gpio.h>



#include "sdm845-camera-sensor-mtp.dtsi"

&soc {

	gpio_keys {

		compatible = "gpio-keys";