Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 808e9a77 authored by Joe Perches's avatar Joe Perches Committed by David S. Miller
Browse files

cirrus: cs89x0: Neaten debugging and logging



Introduce and use a debug macro to test and print.
Convert printks to pr_<level>.

Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ca034bcd
Loading
Loading
Loading
Loading
+82 −105
Original line number Diff line number Diff line
@@ -77,8 +77,14 @@

#include "cs89x0.h"

#define cs89_dbg(val, level, fmt, ...)				\
do {								\
	if (val <= net_debug)					\
		pr_##level(fmt, ##__VA_ARGS__);			\
} while (0)

static char version[] __initdata =
	"v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
	"v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton";

#define DRV_NAME "cs89x0"

@@ -315,8 +321,7 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
{
	int i;

	if (net_debug > 3)
		printk("EEPROM data from %x for %x:\n", off, len);
	cs89_dbg(3, info, "EEPROM data from %x for %x:\n", off, len);
	for (i = 0; i < len; i++) {
		if (wait_eeprom_ready(dev) < 0)
			return -1;
@@ -325,11 +330,9 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
		if (wait_eeprom_ready(dev) < 0)
			return -1;
		buffer[i] = readreg(dev, PP_EEData);
		if (net_debug > 3)
			printk("%04x ", buffer[i]);
		cs89_dbg(3, cont, "%04x ", buffer[i]);
	}
	if (net_debug > 3)
		printk("\n");
	cs89_dbg(3, cont, "\n");
	return 0;
}

@@ -435,8 +438,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
	if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
		lp->send_cmd = TX_NOW;

	if (net_debug)
		printk_once(version);
	pr_info_once("%s\n", version);

	pr_info("%s: cs89%c0%s rev %c found at %p ",
		dev->name,
@@ -495,18 +497,17 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
			lp->adapter_cnf |=  A_CNF_AUI | A_CNF_10B_T |
				A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;

		if (net_debug > 1)
			pr_info("%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
		cs89_dbg(1, info, "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
			 dev->name, i, lp->adapter_cnf);

		/* IRQ. Other chips already probe, see below. */
		if (lp->chip_type == CS8900)
			lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK;

		printk("[Cirrus EEPROM] ");
		pr_cont("[Cirrus EEPROM] ");
	}

	printk("\n");
	pr_cont("\n");

	/* First check to see if an EEPROM is attached. */

@@ -542,8 +543,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
			dev->dev_addr[i * 2] = eeprom_buff[i];
			dev->dev_addr[i * 2 + 1] = eeprom_buff[i] >> 8;
		}
		if (net_debug > 1)
			pr_debug("%s: new adapter_cnf: 0x%x\n",
		cs89_dbg(1, debug, "%s: new adapter_cnf: 0x%x\n",
			 dev->name, lp->adapter_cnf);
	}

@@ -572,8 +572,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
			lp->adapter_cnf |= A_CNF_MEDIA_10B_2;
	}

	if (net_debug > 1)
		pr_debug("%s: after force 0x%x, adapter_cnf=0x%x\n",
	cs89_dbg(1, debug, "%s: after force 0x%x, adapter_cnf=0x%x\n",
		 dev->name, lp->force, lp->adapter_cnf);

	/* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
@@ -629,24 +628,23 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
			dev->irq = i;
	}

	printk(" IRQ %d", dev->irq);
	pr_cont(" IRQ %d", dev->irq);

#if ALLOW_DMA
	if (lp->use_dma) {
		get_dma_channel(dev);
		printk(", DMA %d", dev->dma);
		pr_cont(", DMA %d", dev->dma);
	} else
#endif
		printk(", programmed I/O");
		pr_cont(", programmed I/O");

	/* print the ethernet address. */
	printk(", MAC %pM\n", dev->dev_addr);
	pr_cont(", MAC %pM\n", dev->dev_addr);

	dev->netdev_ops	= &net_ops;
	dev->watchdog_timeo = HZ;

	if (net_debug)
		printk("cs89x0_probe1() successful\n");
	cs89_dbg(0, info, "cs89x0_probe1() successful\n");

	retval = register_netdev(dev);
	if (retval)
@@ -693,8 +691,7 @@ cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
	 * will skip the test for the ADD_PORT.
	 */
	if (ioport & 1) {
		if (net_debug > 1)
			pr_info("%s: odd ioaddr 0x%lx\n", dev->name, ioport);
		cs89_dbg(1, info, "%s: odd ioaddr 0x%lx\n", dev->name, ioport);
		if ((ioport & 2) != 2) {
			if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) !=
			    ADD_SIG) {
@@ -742,8 +739,7 @@ struct net_device * __init cs89x0_probe(int unit)
	io = dev->base_addr;
	irq = dev->irq;

	if (net_debug)
		pr_info("cs89x0_probe(0x%x)\n", io);
	cs89_dbg(0, info, "cs89x0_probe(0x%x)\n", io);

	if (io > 0x1ff)	{	/* Check a single specified location. */
		err = cs89x0_ioport_probe(dev, io, 0);
@@ -817,18 +813,15 @@ set_dma_cfg(struct net_device *dev)

	if (lp->use_dma) {
		if ((lp->isa_config & ANY_ISA_DMA) == 0) {
			if (net_debug > 3)
				printk("set_dma_cfg(): no DMA\n");
			cs89_dbg(3, err, "set_dma_cfg(): no DMA\n");
			return;
		}
		if (lp->isa_config & ISA_RxDMA) {
			lp->curr_rx_cfg |= RX_DMA_ONLY;
			if (net_debug > 3)
				printk("set_dma_cfg(): RX_DMA_ONLY\n");
			cs89_dbg(3, info, "set_dma_cfg(): RX_DMA_ONLY\n");
		} else {
			lp->curr_rx_cfg |= AUTO_RX_DMA;	/* not that we support it... */
			if (net_debug > 3)
				printk("set_dma_cfg(): AUTO_RX_DMA\n");
			cs89_dbg(3, info, "set_dma_cfg(): AUTO_RX_DMA\n");
		}
	}
}
@@ -871,10 +864,10 @@ dma_rx(struct net_device *dev)
	status = bp[0] + (bp[1] << 8);
	length = bp[2] + (bp[3] << 8);
	bp += 4;
	if (net_debug > 5) {
		printk("%s: receiving DMA packet at %lx, status %x, length %x\n",

	cs89_dbg(5, debug, "%s: receiving DMA packet at %lx, status %x, length %x\n",
		 dev->name, (unsigned long)bp, status, length);
	}

	if ((status & RX_OK) == 0) {
		count_rx_errors(status, dev);
		goto skip_this_frame;
@@ -883,8 +876,8 @@ dma_rx(struct net_device *dev)
	/* Malloc up new buffer. */
	skb = netdev_alloc_skb(dev, length + 2);
	if (skb == NULL) {
		if (net_debug)	/* I don't think we want to do this to a stressed system */
			printk("%s: Memory squeeze, dropping packet\n",
		/* I don't think we want to do this to a stressed system */
		cs89_dbg(0, err, "%s: Memory squeeze, dropping packet\n",
			 dev->name);
		dev->stats.rx_dropped++;

@@ -911,12 +904,11 @@ dma_rx(struct net_device *dev)
		bp -= lp->dmasize*1024;
	lp->rx_dma_ptr = bp;

	if (net_debug > 3) {
		printk("%s: received %d byte DMA packet of type %x\n",
	cs89_dbg(3, info, "%s: received %d byte DMA packet of type %x\n",
		 dev->name, length,
		 ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
		  skb->data[ETH_ALEN + ETH_ALEN + 1]));
	}

	skb->protocol = eth_type_trans(skb, dev);
	netif_rx(skb);
	dev->stats.rx_packets++;
@@ -998,8 +990,7 @@ detect_tp(struct net_device *dev)
	int timenow = jiffies;
	int fdx;

	if (net_debug > 1)
		printk("%s: Attempting TP\n", dev->name);
	cs89_dbg(1, debug, "%s: Attempting TP\n", dev->name);

	/* If connected to another full duplex capable 10-Base-T card
	 * the link pulses seem to be lost when the auto detect bit in
@@ -1023,7 +1014,8 @@ detect_tp(struct net_device *dev)
		switch (lp->force & 0xf0) {
#if 0
		case FORCE_AUTO:
			printk("%s: cs8900 doesn't autonegotiate\n", dev->name);
			pr_info("%s: cs8900 doesn't autonegotiate\n",
				dev->name);
			return DETECTED_NONE;
#endif
			/* CS8900 doesn't support AUTO, change to HALF*/
@@ -1102,18 +1094,15 @@ send_test_pkt(struct net_device *dev)
	/* Write the contents of the packet */
	writewords(lp, TX_FRAME_PORT, test_packet, (ETH_ZLEN + 1) >> 1);

	if (net_debug > 1)
		printk("Sending test packet ");
	cs89_dbg(1, debug, "Sending test packet ");
	/* wait a couple of jiffies for packet to be received */
	for (timenow = jiffies; jiffies - timenow < 3;)
		;
	if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
		if (net_debug > 1)
			printk("succeeded\n");
		cs89_dbg(1, cont, "succeeded\n");
		return 1;
	}
	if (net_debug > 1)
		printk("failed\n");
	cs89_dbg(1, cont, "failed\n");
	return 0;
}

@@ -1123,8 +1112,7 @@ detect_aui(struct net_device *dev)
{
	struct net_local *lp = netdev_priv(dev);

	if (net_debug > 1)
		printk("%s: Attempting AUI\n", dev->name);
	cs89_dbg(1, debug, "%s: Attempting AUI\n", dev->name);
	control_dc_dc(dev, 0);

	writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
@@ -1140,8 +1128,7 @@ detect_bnc(struct net_device *dev)
{
	struct net_local *lp = netdev_priv(dev);

	if (net_debug > 1)
		printk("%s: Attempting BNC\n", dev->name);
	cs89_dbg(1, debug, "%s: Attempting BNC\n", dev->name);
	control_dc_dc(dev, 1);

	writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
@@ -1255,12 +1242,10 @@ net_open(struct net_device *dev)
			       dev->name, lp->dmasize);
			goto release_irq;
		}
		if (net_debug > 1) {
			printk("%s: dma %lx %lx\n",
		cs89_dbg(1, debug, "%s: dma %lx %lx\n",
			 dev->name,
			 (unsigned long)lp->dma_buff,
			 (unsigned long)isa_virt_to_bus(lp->dma_buff));
		}
		if ((unsigned long)lp->dma_buff >= MAX_DMA_ADDRESS ||
		    !dma_page_eq(lp->dma_buff,
				 lp->dma_buff + lp->dmasize * 1024 - 1)) {
@@ -1442,8 +1427,7 @@ net_open(struct net_device *dev)
#endif
			 ));
	netif_start_queue(dev);
	if (net_debug > 1)
		printk("cs89x0: net_open() succeeded\n");
	cs89_dbg(1, debug, "net_open() succeeded\n");
	return 0;
bad_out:
	return ret;
@@ -1453,8 +1437,7 @@ static void net_timeout(struct net_device *dev)
{
	/* If we get here, some higher level has decided we are broken.
	   There should really be a "kick me" function call instead. */
	if (net_debug > 0)
		printk("%s: transmit timed out, %s?\n",
	cs89_dbg(0, err, "%s: transmit timed out, %s?\n",
		 dev->name,
		 tx_done(dev) ? "IRQ conflict" : "network cable problem");
	/* Try to restart the adaptor. */
@@ -1466,12 +1449,10 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
	struct net_local *lp = netdev_priv(dev);
	unsigned long flags;

	if (net_debug > 3) {
		printk("%s: sent %d byte packet of type %x\n",
	cs89_dbg(3, debug, "%s: sent %d byte packet of type %x\n",
		 dev->name, skb->len,
		 ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
		  skb->data[ETH_ALEN + ETH_ALEN + 1]));
	}

	/* keep the upload from being interrupted, since we
	 * ask the chip to start transmitting before the
@@ -1492,8 +1473,7 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
		 */

		spin_unlock_irqrestore(&lp->lock, flags);
		if (net_debug)
			printk("cs89x0: Tx buffer not free!\n");
		cs89_dbg(0, err, "Tx buffer not free!\n");
		return NETDEV_TX_BUSY;
	}
	/* Write the contents of the packet */
@@ -1537,8 +1517,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
	 * vista, baby!
	 */
	while ((status = ioread16(lp->virt_addr + ISQ_PORT))) {
		if (net_debug > 4)
			printk("%s: event=%04x\n", dev->name, status);
		cs89_dbg(4, debug, "%s: event=%04x\n", dev->name, status);
		handled = 1;
		switch (status & ISQ_EVENT_MASK) {
		case ISQ_RECEIVER_EVENT:
@@ -1576,8 +1555,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
				netif_wake_queue(dev);	/* Inform upper layers. */
			}
			if (status & TX_UNDERRUN) {
				if (net_debug > 0)
					printk("%s: transmit underrun\n",
				cs89_dbg(0, err, "%s: transmit underrun\n",
					 dev->name);
				lp->send_underrun++;
				if (lp->send_underrun == 3)
@@ -1596,17 +1574,19 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
			if (lp->use_dma && (status & RX_DMA)) {
				int count = readreg(dev, PP_DmaFrameCnt);
				while (count) {
					if (net_debug > 5)
						printk("%s: receiving %d DMA frames\n",
					cs89_dbg(5, debug,
						 "%s: receiving %d DMA frames\n",
						 dev->name, count);
					if (net_debug > 2 && count > 1)
						printk("%s: receiving %d DMA frames\n",
					if (count > 1)
						cs89_dbg(2, debug,
							 "%s: receiving %d DMA frames\n",
							 dev->name, count);
					dma_rx(dev);
					if (--count == 0)
						count = readreg(dev, PP_DmaFrameCnt);
					if (net_debug > 2 && count > 0)
						printk("%s: continuing with %d DMA frames\n",
					if (count > 0)
						cs89_dbg(2, debug,
							 "%s: continuing with %d DMA frames\n",
							 dev->name, count);
				}
			}
@@ -1669,12 +1649,10 @@ net_rx(struct net_device *dev)
	if (length & 1)
		skb->data[length-1] = ioread16(lp->virt_addr + RX_FRAME_PORT);

	if (net_debug > 3) {
		printk("%s: received %d byte packet of type %x\n",
	cs89_dbg(3, debug, "%s: received %d byte packet of type %x\n",
		 dev->name, length,
		 (skb->data[ETH_ALEN + ETH_ALEN] << 8) |
		 skb->data[ETH_ALEN + ETH_ALEN + 1]);
	}

	skb->protocol = eth_type_trans(skb, dev);
	netif_rx(skb);
@@ -1778,8 +1756,7 @@ static int set_mac_address(struct net_device *dev, void *p)

	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);

	if (net_debug)
		printk("%s: Setting MAC address to %pM\n",
	cs89_dbg(0, debug, "%s: Setting MAC address to %pM\n",
		 dev->name, dev->dev_addr);

	/* set the Ethernet address */