Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7e6c9861 authored by Jeff Kirsher's avatar Jeff Kirsher Committed by root
Browse files

e1000: Fix network problems when forced at 100Mb/s and to fix TSO when forced at 100Mb/s 




Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarJohn Ronciak <john.ronciak@intel.com>
parent 84916829

drivers/net/e1000/e1000.h

+5 −0
Original line number Diff line number Diff line
@@ -332,6 +332,11 @@ struct e1000_adapter { 
	int msg_enable;

#ifdef CONFIG_PCI_MSI

	boolean_t have_msi;

#endif

	/* to not mess up cache alignment, always add to the bottom */

	boolean_t txb2b;

#ifdef NETIF_F_TSO

	boolean_t tso_force;

#endif

};

#endif /* _E1000_H_ */

drivers/net/e1000/e1000_ethtool.c

+3 −0
Original line number Diff line number Diff line
@@ -338,6 +338,9 @@ e1000_set_tso(struct net_device *netdev, uint32_t data) 
		netdev->features |= NETIF_F_TSO;

	else

		netdev->features &= ~NETIF_F_TSO;



	DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");

	adapter->tso_force = TRUE;

	return 0;

}

#endif /* NETIF_F_TSO */

drivers/net/e1000/e1000_main.c

+57 −10
Original line number Diff line number Diff line
@@ -1405,10 +1405,13 @@ e1000_configure_tx(struct e1000_adapter *adapter) 
	tctl = E1000_READ_REG(hw, TCTL);



	tctl &= ~E1000_TCTL_CT;

	tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |

	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |

		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);



	E1000_WRITE_REG(hw, TCTL, tctl);

#ifdef DISABLE_MULR

	/* disable Multiple Reads for debugging */

	tctl &= ~E1000_TCTL_MULR;

#endif



	if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {

		tarc = E1000_READ_REG(hw, TARC0);
@@ -1439,6 +1442,9 @@ e1000_configure_tx(struct e1000_adapter *adapter) 
	if (hw->mac_type == e1000_82544 &&

	    hw->bus_type == e1000_bus_type_pcix)

		adapter->pcix_82544 = 1;



	E1000_WRITE_REG(hw, TCTL, tctl);



}



/**
@@ -2243,7 +2249,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter) 
{

	struct net_device *netdev = adapter->netdev;

	struct e1000_tx_ring *txdr = adapter->tx_ring;

	uint32_t link;

	uint32_t link, tctl;



	e1000_check_for_link(&adapter->hw);

	if (adapter->hw.mac_type == e1000_82573) {
@@ -2269,20 +2275,61 @@ e1000_watchdog_task(struct e1000_adapter *adapter) 
			       adapter->link_duplex == FULL_DUPLEX ?

			       "Full Duplex" : "Half Duplex");



			/* tweak tx_queue_len according to speed/duplex */

			/* tweak tx_queue_len according to speed/duplex

			 * and adjust the timeout factor */

			netdev->tx_queue_len = adapter->tx_queue_len;

			adapter->tx_timeout_factor = 1;

			if (adapter->link_duplex == HALF_DUPLEX) {

			adapter->txb2b = 1;

			switch (adapter->link_speed) {

			case SPEED_10:

				adapter->txb2b = 0;

				netdev->tx_queue_len = 10;

				adapter->tx_timeout_factor = 8;

				break;

			case SPEED_100:

				adapter->txb2b = 0;

				netdev->tx_queue_len = 100;

				/* maybe add some timeout factor ? */

				break;

			}



			if ((adapter->hw.mac_type == e1000_82571 || 

			     adapter->hw.mac_type == e1000_82572) &&

			    adapter->txb2b == 0) {

#define SPEED_MODE_BIT (1 << 21)

				uint32_t tarc0;

				tarc0 = E1000_READ_REG(&adapter->hw, TARC0);

				tarc0 &= ~SPEED_MODE_BIT;

				E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);

			}

				

#ifdef NETIF_F_TSO

			/* disable TSO for pcie and 10/100 speeds, to avoid

			 * some hardware issues */

			if (!adapter->tso_force &&

			    adapter->hw.bus_type == e1000_bus_type_pci_express){

				switch (adapter->link_speed) {

				case SPEED_10:

				case SPEED_100:

					DPRINTK(PROBE,INFO,

				        "10/100 speed: disabling TSO\n");

					netdev->features &= ~NETIF_F_TSO;

					break;

				case SPEED_1000:

					netdev->features |= NETIF_F_TSO;

					break;

				default:

					/* oops */

					break;

				}

			}

#endif



			/* enable transmits in the hardware, need to do this

			 * after setting TARC0 */

			tctl = E1000_READ_REG(&adapter->hw, TCTL);

			tctl |= E1000_TCTL_EN;

			E1000_WRITE_REG(&adapter->hw, TCTL, tctl);



			netif_carrier_on(netdev);

			netif_wake_queue(netdev);
@@ -3319,7 +3366,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, 
		adapter->detect_tx_hung = FALSE;

		if (tx_ring->buffer_info[eop].dma &&

		    time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +

		               adapter->tx_timeout_factor * HZ)

		               (adapter->tx_timeout_factor * HZ))

		    && !(E1000_READ_REG(&adapter->hw, STATUS) &

		         E1000_STATUS_TXOFF)) {

drivers/net/e1000/e1000_param.c

+1 −1
Original line number Diff line number Diff line
@@ -268,7 +268,7 @@ e1000_validate_option(int *value, struct e1000_option *opt, 
		BUG();

	}



	DPRINTK(PROBE, INFO, "Invalid %s specified (%i) %s\n",

	DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",

	       opt->name, *value, opt->err);

	*value = opt->def;

	return -1;