Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7e5ba7dc authored by Chandan Gera's avatar Chandan Gera Committed by Pranav Patel
Browse files

ARM: dts: msm: Add camera DT file for OV5693 



Add camera sensor device tree nodes and corresponding
EEPROM nodes to enable OV5693 sensor on apq8053.

Change-Id: I1428c1b3066b6e7dd45726a027a9cfa3ae578a78
Signed-off-by: default avatarChandan Gera <cgera@codeaurora.org>
parent af3795d2

arch/arm64/boot/dts/qcom/apq8053-camera-sensor-dragon.dtsi

0 → 100644
+270 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8953_l22>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		qcam_vaf-supply = <&eldo_cam1_vcm_vreg>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		compatible = "qcom,eeprom";

		reg = <0x0>;

		qcom,cci-master = <0>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vdig-supply = <&pm8953_l2>;

		cam_vana-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vdig",

						"cam_vana";

		qcom,cam-vreg-min-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-max-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default

				&cam_sensor_rear_vana>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep

				&cam_sensor_rear_vana_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_STANDBY0";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		compatible = "qcom,eeprom";

		reg = <0x1>;

		qcom,cci-master = <0>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vdig-supply = <&pm8953_l2>;

		cam_vana-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vdig",

						"cam_vana";

		qcom,cam-vreg-min-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-max-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

				&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep

				&cam_sensor_front1_sleep>;

		gpios = <&tlmm 27 0>,

			<&tlmm 129 0>,

			<&tlmm 130 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"CAM_RESET1",

			"CAM_STANDBY1";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		compatible = "qcom,eeprom";

		reg = <0x2>;

		qcom,cci-master = <0>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vdig-supply = <&pm8953_l2>;

		cam_vana-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vdig",

						"cam_vana";

		qcom,cam-vreg-min-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-max-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 131 0>,

			<&tlmm 132 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

			"CAM_RESET2",

			"CAM_STANDBY2";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	camera0: qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <0>;

		/*qcom,led-flash-src = <&led_flash0>;*/

		qcom,actuator-src = <&actuator0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vdig-supply = <&pm8953_l2>;

		cam_vana-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vdig",

						"cam_vana";

		qcom,cam-vreg-min-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-max-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default

				&cam_sensor_rear_vana>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep

				&cam_sensor_rear_vana_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_STANDBY0";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	camera1: qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <0>;

		qcom,actuator-src = <&actuator0>;

		qcom,eeprom-src = <&eeprom1>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vdig-supply = <&pm8953_l2>;

		cam_vana-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vdig",

						"cam_vana";

		qcom,cam-vreg-min-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-max-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

				&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep

				&cam_sensor_front1_sleep>;

		gpios = <&tlmm 27 0>,

			<&tlmm 129 0>,

			<&tlmm 130 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"CAM_RESET1",

			"CAM_STANDBY1";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	camera2: qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <0>;

		qcom,actuator-src = <&actuator0>;

		qcom,eeprom-src = <&eeprom2>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vdig-supply = <&pm8953_l2>;

		cam_vana-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vdig",

						"cam_vana";

		qcom,cam-vreg-min-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-max-voltage = <1800000 1200000 2850000>;

		qcom,cam-vreg-op-mode = <105000 0 100000>;

		/*qcom,gpio-no-mux = <0>;*/

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 131 0>,

			<&tlmm 132 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

			"CAM_RESET2",

			"CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};

arch/arm64/boot/dts/qcom/apq8053-lite-dragon.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@ 
 */



#include "msm8953-pinctrl.dtsi"

#include "apq8053-camera-sensor-dragon.dtsi"

#include "pmi8950.dtsi"

#include "msm8953-pmi8950.dtsi"