Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 771b6019 authored by Rashi Bindra's avatar Rashi Bindra
Browse files

ARM: dts: msm: Add support for 8" innolux panel on FEPv2 



Add support for dsi_boyi_hx83100a_800p video mode panel
for enabling display on apq8053 FEPv2.

Change-Id: I4e8a4cf81ef9d572115c12b858740b22468fd0fd
Signed-off-by: default avatarRashi Bindra <rbindra@codeaurora.org>
parent 3afabc36

arch/arm64/boot/dts/qcom/apq8053-lite-dragon-v2.0.dtsi

+29 −0
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@ 
 */



#include "apq8053-lite-dragon.dtsi"

#include "msm8953-mdss-panels.dtsi"



&i2c_3 {

	status = "okay";
@@ -34,6 +35,34 @@ 
	};

};



&mdss_mdp {

	qcom,mdss-pref-prim-intf = "dsi";

};



&mdss_dsi {

	hw-config = "single_dsi";

};



&mdss_dsi0 {

	qcom,dsi-pref-prim-pan = <&dsi_boyi_hx83100a_800p_video>;

	pinctrl-names = "mdss_default", "mdss_sleep";

	pinctrl-0 = <&mdss_dsi_active &mdss_te_active &mdss_dsi_gpio>;

	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend &mdss_dsi_gpio>;



	vdd-supply = <&pm8953_l10>;

	vddio-supply = <&pm8953_l6>;

	lab-supply = <&lab_regulator>;

	ibb-supply = <&ibb_regulator>;



	qcom,platform-te-gpio = <&tlmm 24 0>;

	qcom,platform-reset-gpio = <&tlmm 61 0>;

	qcom,platform-bklight-en-gpio = <&tlmm 100 0>;

};



&mdss_dsi1 {

	status = "disabled";

};



&labibb {

	status = "okay";

	qpnp,qpnp-labibb-mode = "lcd";

arch/arm64/boot/dts/qcom/dsi-panel-hx83100a-800p-video.dtsi

0 → 100644
+84 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_boyi_hx83100a_800p_video: qcom,mdss_dsi_boyi_hx83100a_800p_video {

		qcom,mdss-dsi-panel-name = "hx83100a 800p video mode dsi panel";

		qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;

		qcom,mdss-dsi-panel-type = "dsi_video_mode";

		qcom,mdss-dsi-panel-destination = "display_2";

		qcom,mdss-dsi-panel-framerate = <60>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <800>;

		qcom,mdss-dsi-panel-height = <1280>;

		qcom,mdss-dsi-h-front-porch = <40>;

		qcom,mdss-dsi-h-back-porch = <40>;

		qcom,mdss-dsi-h-pulse-width = <40>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <8>;

		qcom,mdss-dsi-v-front-porch = <412>;

		qcom,mdss-dsi-v-pulse-width = <4>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-on-command = [

			/*exit sleep mode and delay 120ms*/

			39 01 00 00 78 00 02 11 00

			/*set display on and delay 20ms*/

			39 01 00 00 14 00 02 29 00

			/*enable extended command set*/

			39 01 00 00 00 00 04 b9 83 10 0a

			/*32KHZ PWM*/

			39 01 00 00 00 00 08 c9 1f 00 08 1e 81 1e 00

			/*backlight enable*/

			39 01 00 00 00 00 02 53 24

			/*still picture and delay 5ms*/

			39 01 00 00 05 00 02 55 02

			/*about 80% duty ratio*/

			39 01 00 00 00 00 0a ca 40 3c 38 34 33 32 30 2c 28

		];

		qcom,mdss-dsi-off-command = [05 01 00 00 96 00 02 28 00

					     05 01 00 00 00 00 02 10 00];

		qcom,mdss-dsi-on-command-state = "dsi_hs_mode";

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

		qcom,mdss-dsi-h-sync-pulse = <1>;

		qcom,mdss-dsi-traffic-mode = "burst_mode";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-panel-timings = [9b 22 18 00 4a 4e 1c 26

			1d 03 04 00];

		qcom,mdss-dsi-t-clk-post = <0x04>;

		qcom,mdss-dsi-t-clk-pre = <0x1f>;

		qcom,mdss-dsi-bl-min-level = <2>;

		qcom,mdss-dsi-bl-max-level = <4095>;

		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";

		qcom,mdss-pan-physical-width-dimension = <107>;

		qcom,mdss-pan-physical-height-dimension = <172>;

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 5>, <1 50>;

		qcom,mdss-dsi-lp11-init;

		qcom,mdss-dsi-post-init-delay = <1>;

	};

};

arch/arm64/boot/dts/qcom/msm8953-mdss-panels.dtsi

+9 −0
Original line number Diff line number Diff line
@@ -24,6 +24,7 @@ 
#include "dsi-panel-lt8912-480p-video.dtsi"

#include "dsi-panel-lt8912-1080p-video.dtsi"

#include "dsi-panel-hx8399c-fhd-plus-video.dtsi"

#include "dsi-panel-hx83100a-800p-video.dtsi"



&soc {

	dsi_panel_pwr_supply: dsi_panel_pwr_supply {
@@ -148,3 +149,11 @@ 
		24 1f 08 09 05 03 04 a0

		24 1c 08 09 05 03 04 a0];

};



&dsi_boyi_hx83100a_800p_video {

	qcom,mdss-dsi-panel-timings-phy-v2 = [1f 1c 05 06 03 03 04 a0

		1f 1c 05 06 03 03 04 a0

		1f 1c 05 06 03 03 04 a0

		1f 1c 05 06 03 03 04 a0

		1f 10 05 06 03 03 04 a0];

};

arch/arm64/boot/dts/qcom/msm8953-pinctrl.dtsi

+13 −0
Original line number Diff line number Diff line
@@ -397,6 +397,19 @@ 
					bias-pull-down; /* pull down */

				};

			};

			mdss_dsi_gpio: mdss_dsi_gpio {

				mux {

					pins = "gpio141";

					function = "gpio";

				};



				config {

					pins = "gpio141";

					drive-strength = <8>;

					bias-pull-down;

					output-low;

				};

			};

		};



		pmx_mdss_te {