Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 73f1ad86 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz
Browse files

ide: mark "idebus=" kernel parameter as obsoleted (take 2) 



We have "vlb|pci_clock=" parameters now.

Acked-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent ebae41a5

Documentation/ide/ide.txt

+0 −10
Original line number Diff line number Diff line
@@ -205,16 +205,6 @@ Summary of ide driver parameters for kernel command line 


 "hdx=nodma"		: disallow DMA



 "idebus=xx"		: inform IDE driver of VESA/PCI bus speed in MHz,

			  where "xx" is between 20 and 66 inclusive,

			  used when tuning chipset PIO modes.

			  For PCI bus, 25 is correct for a P75 system,

			  30 is correct for P90,P120,P180 systems,

			  and 33 is used for P100,P133,P166 systems.

			  If in doubt, use idebus=33 for PCI.

			  As for VLB, it is safest to not specify it.

			  Bigger values are safer than smaller ones.



 "ide=doubler"		: probe/support IDE doublers on Amiga



There may be more options than shown -- use the source, Luke!

drivers/ide/ide.c

+1 −1
Original line number Diff line number Diff line
@@ -969,7 +969,7 @@ static int __init ide_setup(char *s) 
			idebus_parameter = vals[0];

		} else

			printk(" -- BAD BUS SPEED! Expected value from 20 to 66");

		goto done;

		goto obsolete_option;

	}



bad_option:

drivers/ide/legacy/qd65xx.c

+0 −2
Original line number Diff line number Diff line
@@ -11,8 +11,6 @@ 
 *

 * QDI QD6500/QD6580 EIDE controller fast support

 *

 * Please set local bus speed using kernel parameter idebus

 * 	for example, "idebus=33" stands for 33Mhz VLbus

 * To activate controller support, use "ide0=qd65xx"

 * To enable tuning, use "hda=autotune hdb=autotune"

 * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune"

drivers/ide/pci/cy82c693.c

+0 −2
Original line number Diff line number Diff line
@@ -18,8 +18,6 @@ 
 *   hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA

 * - this is my first linux driver, so there's probably a lot  of room

 *   for optimizations and bug fixing, so feel free to do it.

 * - use idebus=xx parameter to set PCI bus speed - needed to calc

 *   timings for PIO modes (default will be 40)

 * - if using PIO mode it's a good idea to set the PIO mode and

 *   32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda

 * - I had some problems with my IBM DHEA with PIO modes < 2

drivers/ide/pci/opti621.c

+1 −2
Original line number Diff line number Diff line
@@ -53,8 +53,7 @@ 
 * If you then set the second drive to another PIO, the old value

 * (automatically selected) will be overrided by yours.

 * There is a 25/33MHz switch in configuration

 * register, but driver is written for use at any frequency which get

 * (use idebus=xx to select PCI bus speed).

 * register, but driver is written for use at any frequency.

 *

 * Version 0.1, Nov 8, 1996

 * by Jaromir Koutek, for 2.1.8.