drm/i915: Drop /** */ comments from i915_reg.h (646b4269) · Commits · e / devices / android_kernel_fairphone_FP3

drivers/gpu/drm/i915/i915_reg.h

+123 −123

Original line number	Diff line number	Diff line
		@@ -1680,7 +1680,7 @@ enum punit_power_well {
		# define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */
		# define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5)
		# define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4)
		/**
		/*
		* This bit must be set on the 830 to prevent hangs when turning off the
		* overlay scaler.
		*/
		@@ -1700,12 +1700,12 @@ enum punit_power_well {
		# define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7)
		# define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6)
		# define MAG_CLOCK_GATE_DISABLE (1 << 5)
		/** This bit must be unset on 855,865 */
		/* This bit must be unset on 855,865 */
		# define MECI_CLOCK_GATE_DISABLE (1 << 4)
		# define DCMP_CLOCK_GATE_DISABLE (1 << 3)
		# define MEC_CLOCK_GATE_DISABLE (1 << 2)
		# define MECO_CLOCK_GATE_DISABLE (1 << 1)
		/** This bit must be set on 855,865. */
		/* This bit must be set on 855,865. */
		# define SV_CLOCK_GATE_DISABLE (1 << 0)
		# define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16)
		# define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15)
		@@ -1726,14 +1726,14 @@ enum punit_power_well {
		# define I915_BY_CLOCK_GATE_DISABLE (1 << 0)

		# define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30)
		/** This bit must always be set on 965G/965GM */
		/* This bit must always be set on 965G/965GM */
		# define I965_RCC_CLOCK_GATE_DISABLE (1 << 29)
		# define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28)
		# define I965_DAP_CLOCK_GATE_DISABLE (1 << 27)
		# define I965_ROC_CLOCK_GATE_DISABLE (1 << 26)
		# define I965_GW_CLOCK_GATE_DISABLE (1 << 25)
		# define I965_TD_CLOCK_GATE_DISABLE (1 << 24)
		/** This bit must always be set on 965G */
		/* This bit must always be set on 965G */
		# define I965_ISC_CLOCK_GATE_DISABLE (1 << 23)
		# define I965_IC_CLOCK_GATE_DISABLE (1 << 22)
		# define I965_EU_CLOCK_GATE_DISABLE (1 << 21)
		@@ -1800,7 +1800,7 @@ enum punit_power_well {
		/* Memory controller frequency in MCHBAR for Haswell (possible SNB+) */
		#define DCLK (MCHBAR_MIRROR_BASE_SNB + 0x5e04)

		/** 915-945 and GM965 MCH register controlling DRAM channel access */
		/* 915-945 and GM965 MCH register controlling DRAM channel access */
		#define DCC 0x10200
		#define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0)
		#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0)
		@@ -1809,15 +1809,15 @@ enum punit_power_well {
		#define DCC_CHANNEL_XOR_DISABLE (1 << 10)
		#define DCC_CHANNEL_XOR_BIT_17 (1 << 9)

		/** Pineview MCH register contains DDR3 setting */
		/* Pineview MCH register contains DDR3 setting */
		#define CSHRDDR3CTL 0x101a8
		#define CSHRDDR3CTL_DDR3 (1 << 2)

		/** 965 MCH register controlling DRAM channel configuration */
		/* 965 MCH register controlling DRAM channel configuration */
		#define C0DRB3 0x10206
		#define C1DRB3 0x10606

		/** snb MCH registers for reading the DRAM channel configuration */
		/* snb MCH registers for reading the DRAM channel configuration */
		#define MAD_DIMM_C0 (MCHBAR_MIRROR_BASE_SNB + 0x5004)
		#define MAD_DIMM_C1 (MCHBAR_MIRROR_BASE_SNB + 0x5008)
		#define MAD_DIMM_C2 (MCHBAR_MIRROR_BASE_SNB + 0x500C)
		@@ -1839,7 +1839,7 @@ enum punit_power_well {
		#define MAD_DIMM_A_SIZE_SHIFT 0
		#define MAD_DIMM_A_SIZE_MASK (0xff << MAD_DIMM_A_SIZE_SHIFT)

		/** snb MCH registers for priority tuning */
		/* snb MCH registers for priority tuning */
		#define MCH_SSKPD (MCHBAR_MIRROR_BASE_SNB + 0x5d10)
		#define MCH_SSKPD_WM0_MASK 0x3f
		#define MCH_SSKPD_WM0_VAL 0xc
		@@ -2513,7 +2513,7 @@ enum punit_power_well {
		#define SDVO_PIPE_B_SELECT (1 << 30)
		#define SDVO_STALL_SELECT (1 << 29)
		#define SDVO_INTERRUPT_ENABLE (1 << 26)
		/**
		/*
		* 915G/GM SDVO pixel multiplier.
		* Programmed value is multiplier - 1, up to 5x.
		* \sa DPLL_MD_UDI_MULTIPLIER_MASK
		@@ -2827,65 +2827,65 @@ enum punit_power_well {

		/* TV port control */
		#define TV_CTL 0x68000
		/** Enables the TV encoder */
		/* Enables the TV encoder */
		# define TV_ENC_ENABLE (1 << 31)
		/** Sources the TV encoder input from pipe B instead of A. */
		/* Sources the TV encoder input from pipe B instead of A. */
		# define TV_ENC_PIPEB_SELECT (1 << 30)
		/** Outputs composite video (DAC A only) */
		/* Outputs composite video (DAC A only) */
		# define TV_ENC_OUTPUT_COMPOSITE (0 << 28)
		/** Outputs SVideo video (DAC B/C) */
		/* Outputs SVideo video (DAC B/C) */
		# define TV_ENC_OUTPUT_SVIDEO (1 << 28)
		/** Outputs Component video (DAC A/B/C) */
		/* Outputs Component video (DAC A/B/C) */
		# define TV_ENC_OUTPUT_COMPONENT (2 << 28)
		/** Outputs Composite and SVideo (DAC A/B/C) */
		/* Outputs Composite and SVideo (DAC A/B/C) */
		# define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28)
		# define TV_TRILEVEL_SYNC (1 << 21)
		/** Enables slow sync generation (945GM only) */
		/* Enables slow sync generation (945GM only) */
		# define TV_SLOW_SYNC (1 << 20)
		/** Selects 4x oversampling for 480i and 576p */
		/* Selects 4x oversampling for 480i and 576p */
		# define TV_OVERSAMPLE_4X (0 << 18)
		/** Selects 2x oversampling for 720p and 1080i */
		/* Selects 2x oversampling for 720p and 1080i */
		# define TV_OVERSAMPLE_2X (1 << 18)
		/** Selects no oversampling for 1080p */
		/* Selects no oversampling for 1080p */
		# define TV_OVERSAMPLE_NONE (2 << 18)
		/** Selects 8x oversampling */
		/* Selects 8x oversampling */
		# define TV_OVERSAMPLE_8X (3 << 18)
		/** Selects progressive mode rather than interlaced */
		/* Selects progressive mode rather than interlaced */
		# define TV_PROGRESSIVE (1 << 17)
		/** Sets the colorburst to PAL mode. Required for non-M PAL modes. */
		/* Sets the colorburst to PAL mode. Required for non-M PAL modes. */
		# define TV_PAL_BURST (1 << 16)
		/** Field for setting delay of Y compared to C */
		/* Field for setting delay of Y compared to C */
		# define TV_YC_SKEW_MASK (7 << 12)
		/** Enables a fix for 480p/576p standard definition modes on the 915GM only */
		/* Enables a fix for 480p/576p standard definition modes on the 915GM only */
		# define TV_ENC_SDP_FIX (1 << 11)
		/**
		/*
		* Enables a fix for the 915GM only.
		*
		* Not sure what it does.
		*/
		# define TV_ENC_C0_FIX (1 << 10)
		/** Bits that must be preserved by software */
		/* Bits that must be preserved by software */
		# define TV_CTL_SAVE ((1 << 11) \| (3 << 9) \| (7 << 6) \| 0xf)
		# define TV_FUSE_STATE_MASK (3 << 4)
		/** Read-only state that reports all features enabled */
		/* Read-only state that reports all features enabled */
		# define TV_FUSE_STATE_ENABLED (0 << 4)
		/** Read-only state that reports that Macrovision is disabled in hardware*/
		/* Read-only state that reports that Macrovision is disabled in hardware*/
		# define TV_FUSE_STATE_NO_MACROVISION (1 << 4)
		/** Read-only state that reports that TV-out is disabled in hardware. */
		/* Read-only state that reports that TV-out is disabled in hardware. */
		# define TV_FUSE_STATE_DISABLED (2 << 4)
		/** Normal operation */
		/* Normal operation */
		# define TV_TEST_MODE_NORMAL (0 << 0)
		/** Encoder test pattern 1 - combo pattern */
		/* Encoder test pattern 1 - combo pattern */
		# define TV_TEST_MODE_PATTERN_1 (1 << 0)
		/** Encoder test pattern 2 - full screen vertical 75% color bars */
		/* Encoder test pattern 2 - full screen vertical 75% color bars */
		# define TV_TEST_MODE_PATTERN_2 (2 << 0)
		/** Encoder test pattern 3 - full screen horizontal 75% color bars */
		/* Encoder test pattern 3 - full screen horizontal 75% color bars */
		# define TV_TEST_MODE_PATTERN_3 (3 << 0)
		/** Encoder test pattern 4 - random noise */
		/* Encoder test pattern 4 - random noise */
		# define TV_TEST_MODE_PATTERN_4 (4 << 0)
		/** Encoder test pattern 5 - linear color ramps */
		/* Encoder test pattern 5 - linear color ramps */
		# define TV_TEST_MODE_PATTERN_5 (5 << 0)
		/**
		/*
		* This test mode forces the DACs to 50% of full output.
		*
		* This is used for load detection in combination with TVDAC_SENSE_MASK
		@@ -2895,35 +2895,35 @@ enum punit_power_well {

		#define TV_DAC 0x68004
		# define TV_DAC_SAVE 0x00ffff00
		/**
		/*
		* Reports that DAC state change logic has reported change (RO).
		*
		* This gets cleared when TV_DAC_STATE_EN is cleared
		*/
		# define TVDAC_STATE_CHG (1 << 31)
		# define TVDAC_SENSE_MASK (7 << 28)
		/** Reports that DAC A voltage is above the detect threshold */
		/* Reports that DAC A voltage is above the detect threshold */
		# define TVDAC_A_SENSE (1 << 30)
		/** Reports that DAC B voltage is above the detect threshold */
		/* Reports that DAC B voltage is above the detect threshold */
		# define TVDAC_B_SENSE (1 << 29)
		/** Reports that DAC C voltage is above the detect threshold */
		/* Reports that DAC C voltage is above the detect threshold */
		# define TVDAC_C_SENSE (1 << 28)
		/**
		/*
		* Enables DAC state detection logic, for load-based TV detection.
		*
		* The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set
		* to off, for load detection to work.
		*/
		# define TVDAC_STATE_CHG_EN (1 << 27)
		/** Sets the DAC A sense value to high */
		/* Sets the DAC A sense value to high */
		# define TVDAC_A_SENSE_CTL (1 << 26)
		/** Sets the DAC B sense value to high */
		/* Sets the DAC B sense value to high */
		# define TVDAC_B_SENSE_CTL (1 << 25)
		/** Sets the DAC C sense value to high */
		/* Sets the DAC C sense value to high */
		# define TVDAC_C_SENSE_CTL (1 << 24)
		/** Overrides the ENC_ENABLE and DAC voltage levels */
		/* Overrides the ENC_ENABLE and DAC voltage levels */
		# define DAC_CTL_OVERRIDE (1 << 7)
		/** Sets the slew rate. Must be preserved in software */
		/* Sets the slew rate. Must be preserved in software */
		# define ENC_TVDAC_SLEW_FAST (1 << 6)
		# define DAC_A_1_3_V (0 << 4)
		# define DAC_A_1_1_V (1 << 4)
		@@ -2938,7 +2938,7 @@ enum punit_power_well {
		# define DAC_C_0_7_V (2 << 0)
		# define DAC_C_MASK (3 << 0)

		/**
		/*
		* CSC coefficients are stored in a floating point format with 9 bits of
		* mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n,
		* where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with
		@@ -2953,7 +2953,7 @@ enum punit_power_well {
		#define TV_CSC_Y2 0x68014
		# define TV_BY_MASK 0x07ff0000
		# define TV_BY_SHIFT 16
		/**
		/*
		* Y attenuation for component video.
		*
		* Stored in 1.9 fixed point.
		@@ -2970,7 +2970,7 @@ enum punit_power_well {
		#define TV_CSC_U2 0x6801c
		# define TV_BU_MASK 0x07ff0000
		# define TV_BU_SHIFT 16
		/**
		/*
		* U attenuation for component video.
		*
		* Stored in 1.9 fixed point.
		@@ -2987,7 +2987,7 @@ enum punit_power_well {
		#define TV_CSC_V2 0x68024
		# define TV_BV_MASK 0x07ff0000
		# define TV_BV_SHIFT 16
		/**
		/*
		* V attenuation for component video.
		*
		* Stored in 1.9 fixed point.
		@@ -2996,74 +2996,74 @@ enum punit_power_well {
		# define TV_AV_SHIFT 0

		#define TV_CLR_KNOBS 0x68028
		/** 2s-complement brightness adjustment */
		/* 2s-complement brightness adjustment */
		# define TV_BRIGHTNESS_MASK 0xff000000
		# define TV_BRIGHTNESS_SHIFT 24
		/** Contrast adjustment, as a 2.6 unsigned floating point number */
		/* Contrast adjustment, as a 2.6 unsigned floating point number */
		# define TV_CONTRAST_MASK 0x00ff0000
		# define TV_CONTRAST_SHIFT 16
		/** Saturation adjustment, as a 2.6 unsigned floating point number */
		/* Saturation adjustment, as a 2.6 unsigned floating point number */
		# define TV_SATURATION_MASK 0x0000ff00
		# define TV_SATURATION_SHIFT 8
		/** Hue adjustment, as an integer phase angle in degrees */
		/* Hue adjustment, as an integer phase angle in degrees */
		# define TV_HUE_MASK 0x000000ff
		# define TV_HUE_SHIFT 0

		#define TV_CLR_LEVEL 0x6802c
		/** Controls the DAC level for black */
		/* Controls the DAC level for black */
		# define TV_BLACK_LEVEL_MASK 0x01ff0000
		# define TV_BLACK_LEVEL_SHIFT 16
		/** Controls the DAC level for blanking */
		/* Controls the DAC level for blanking */
		# define TV_BLANK_LEVEL_MASK 0x000001ff
		# define TV_BLANK_LEVEL_SHIFT 0

		#define TV_H_CTL_1 0x68030
		/** Number of pixels in the hsync. */
		/* Number of pixels in the hsync. */
		# define TV_HSYNC_END_MASK 0x1fff0000
		# define TV_HSYNC_END_SHIFT 16
		/** Total number of pixels minus one in the line (display and blanking). */
		/* Total number of pixels minus one in the line (display and blanking). */
		# define TV_HTOTAL_MASK 0x00001fff
		# define TV_HTOTAL_SHIFT 0

		#define TV_H_CTL_2 0x68034
		/** Enables the colorburst (needed for non-component color) */
		/* Enables the colorburst (needed for non-component color) */
		# define TV_BURST_ENA (1 << 31)
		/** Offset of the colorburst from the start of hsync, in pixels minus one. */
		/* Offset of the colorburst from the start of hsync, in pixels minus one. */
		# define TV_HBURST_START_SHIFT 16
		# define TV_HBURST_START_MASK 0x1fff0000
		/** Length of the colorburst */
		/* Length of the colorburst */
		# define TV_HBURST_LEN_SHIFT 0
		# define TV_HBURST_LEN_MASK 0x0001fff

		#define TV_H_CTL_3 0x68038
		/** End of hblank, measured in pixels minus one from start of hsync */
		/* End of hblank, measured in pixels minus one from start of hsync */
		# define TV_HBLANK_END_SHIFT 16
		# define TV_HBLANK_END_MASK 0x1fff0000
		/** Start of hblank, measured in pixels minus one from start of hsync */
		/* Start of hblank, measured in pixels minus one from start of hsync */
		# define TV_HBLANK_START_SHIFT 0
		# define TV_HBLANK_START_MASK 0x0001fff

		#define TV_V_CTL_1 0x6803c
		/** XXX */
		/* XXX */
		# define TV_NBR_END_SHIFT 16
		# define TV_NBR_END_MASK 0x07ff0000
		/** XXX */
		/* XXX */
		# define TV_VI_END_F1_SHIFT 8
		# define TV_VI_END_F1_MASK 0x00003f00
		/** XXX */
		/* XXX */
		# define TV_VI_END_F2_SHIFT 0
		# define TV_VI_END_F2_MASK 0x0000003f

		#define TV_V_CTL_2 0x68040
		/** Length of vsync, in half lines */
		/* Length of vsync, in half lines */
		# define TV_VSYNC_LEN_MASK 0x07ff0000
		# define TV_VSYNC_LEN_SHIFT 16
		/** Offset of the start of vsync in field 1, measured in one less than the
		/* Offset of the start of vsync in field 1, measured in one less than the
		* number of half lines.
		*/
		# define TV_VSYNC_START_F1_MASK 0x00007f00
		# define TV_VSYNC_START_F1_SHIFT 8
		/**
		/*
		* Offset of the start of vsync in field 2, measured in one less than the
		* number of half lines.
		*/
		@@ -3071,17 +3071,17 @@ enum punit_power_well {
		# define TV_VSYNC_START_F2_SHIFT 0

		#define TV_V_CTL_3 0x68044
		/** Enables generation of the equalization signal */
		/* Enables generation of the equalization signal */
		# define TV_EQUAL_ENA (1 << 31)
		/** Length of vsync, in half lines */
		/* Length of vsync, in half lines */
		# define TV_VEQ_LEN_MASK 0x007f0000
		# define TV_VEQ_LEN_SHIFT 16
		/** Offset of the start of equalization in field 1, measured in one less than
		/* Offset of the start of equalization in field 1, measured in one less than
		* the number of half lines.
		*/
		# define TV_VEQ_START_F1_MASK 0x0007f00
		# define TV_VEQ_START_F1_SHIFT 8
		/**
		/*
		* Offset of the start of equalization in field 2, measured in one less than
		* the number of half lines.
		*/
		@@ -3089,13 +3089,13 @@ enum punit_power_well {
		# define TV_VEQ_START_F2_SHIFT 0

		#define TV_V_CTL_4 0x68048
		/**
		/*
		* Offset to start of vertical colorburst, measured in one less than the
		* number of lines from vertical start.
		*/
		# define TV_VBURST_START_F1_MASK 0x003f0000
		# define TV_VBURST_START_F1_SHIFT 16
		/**
		/*
		* Offset to the end of vertical colorburst, measured in one less than the
		* number of lines from the start of NBR.
		*/
		@@ -3103,13 +3103,13 @@ enum punit_power_well {
		# define TV_VBURST_END_F1_SHIFT 0

		#define TV_V_CTL_5 0x6804c
		/**
		/*
		* Offset to start of vertical colorburst, measured in one less than the
		* number of lines from vertical start.
		*/
		# define TV_VBURST_START_F2_MASK 0x003f0000
		# define TV_VBURST_START_F2_SHIFT 16
		/**
		/*
		* Offset to the end of vertical colorburst, measured in one less than the
		* number of lines from the start of NBR.
		*/
		@@ -3117,13 +3117,13 @@ enum punit_power_well {
		# define TV_VBURST_END_F2_SHIFT 0

		#define TV_V_CTL_6 0x68050
		/**
		/*
		* Offset to start of vertical colorburst, measured in one less than the
		* number of lines from vertical start.
		*/
		# define TV_VBURST_START_F3_MASK 0x003f0000
		# define TV_VBURST_START_F3_SHIFT 16
		/**
		/*
		* Offset to the end of vertical colorburst, measured in one less than the
		* number of lines from the start of NBR.
		*/
		@@ -3131,13 +3131,13 @@ enum punit_power_well {
		# define TV_VBURST_END_F3_SHIFT 0

		#define TV_V_CTL_7 0x68054
		/**
		/*
		* Offset to start of vertical colorburst, measured in one less than the
		* number of lines from vertical start.
		*/
		# define TV_VBURST_START_F4_MASK 0x003f0000
		# define TV_VBURST_START_F4_SHIFT 16
		/**
		/*
		* Offset to the end of vertical colorburst, measured in one less than the
		* number of lines from the start of NBR.
		*/
		@@ -3145,56 +3145,56 @@ enum punit_power_well {
		# define TV_VBURST_END_F4_SHIFT 0

		#define TV_SC_CTL_1 0x68060
		/** Turns on the first subcarrier phase generation DDA */
		/* Turns on the first subcarrier phase generation DDA */
		# define TV_SC_DDA1_EN (1 << 31)
		/** Turns on the first subcarrier phase generation DDA */
		/* Turns on the first subcarrier phase generation DDA */
		# define TV_SC_DDA2_EN (1 << 30)
		/** Turns on the first subcarrier phase generation DDA */
		/* Turns on the first subcarrier phase generation DDA */
		# define TV_SC_DDA3_EN (1 << 29)
		/** Sets the subcarrier DDA to reset frequency every other field */
		/* Sets the subcarrier DDA to reset frequency every other field */
		# define TV_SC_RESET_EVERY_2 (0 << 24)
		/** Sets the subcarrier DDA to reset frequency every fourth field */
		/* Sets the subcarrier DDA to reset frequency every fourth field */
		# define TV_SC_RESET_EVERY_4 (1 << 24)
		/** Sets the subcarrier DDA to reset frequency every eighth field */
		/* Sets the subcarrier DDA to reset frequency every eighth field */
		# define TV_SC_RESET_EVERY_8 (2 << 24)
		/** Sets the subcarrier DDA to never reset the frequency */
		/* Sets the subcarrier DDA to never reset the frequency */
		# define TV_SC_RESET_NEVER (3 << 24)
		/** Sets the peak amplitude of the colorburst.*/
		/* Sets the peak amplitude of the colorburst.*/
		# define TV_BURST_LEVEL_MASK 0x00ff0000
		# define TV_BURST_LEVEL_SHIFT 16
		/** Sets the increment of the first subcarrier phase generation DDA */
		/* Sets the increment of the first subcarrier phase generation DDA */
		# define TV_SCDDA1_INC_MASK 0x00000fff
		# define TV_SCDDA1_INC_SHIFT 0

		#define TV_SC_CTL_2 0x68064
		/** Sets the rollover for the second subcarrier phase generation DDA */
		/* Sets the rollover for the second subcarrier phase generation DDA */
		# define TV_SCDDA2_SIZE_MASK 0x7fff0000
		# define TV_SCDDA2_SIZE_SHIFT 16
		/** Sets the increent of the second subcarrier phase generation DDA */
		/* Sets the increent of the second subcarrier phase generation DDA */
		# define TV_SCDDA2_INC_MASK 0x00007fff
		# define TV_SCDDA2_INC_SHIFT 0

		#define TV_SC_CTL_3 0x68068
		/** Sets the rollover for the third subcarrier phase generation DDA */
		/* Sets the rollover for the third subcarrier phase generation DDA */
		# define TV_SCDDA3_SIZE_MASK 0x7fff0000
		# define TV_SCDDA3_SIZE_SHIFT 16
		/** Sets the increent of the third subcarrier phase generation DDA */
		/* Sets the increent of the third subcarrier phase generation DDA */
		# define TV_SCDDA3_INC_MASK 0x00007fff
		# define TV_SCDDA3_INC_SHIFT 0

		#define TV_WIN_POS 0x68070
		/** X coordinate of the display from the start of horizontal active */
		/* X coordinate of the display from the start of horizontal active */
		# define TV_XPOS_MASK 0x1fff0000
		# define TV_XPOS_SHIFT 16
		/** Y coordinate of the display from the start of vertical active (NBR) */
		/* Y coordinate of the display from the start of vertical active (NBR) */
		# define TV_YPOS_MASK 0x00000fff
		# define TV_YPOS_SHIFT 0

		#define TV_WIN_SIZE 0x68074
		/** Horizontal size of the display window, measured in pixels*/
		/* Horizontal size of the display window, measured in pixels*/
		# define TV_XSIZE_MASK 0x1fff0000
		# define TV_XSIZE_SHIFT 16
		/**
		/*
		* Vertical size of the display window, measured in pixels.
		*
		* Must be even for interlaced modes.
		@@ -3203,28 +3203,28 @@ enum punit_power_well {
		# define TV_YSIZE_SHIFT 0

		#define TV_FILTER_CTL_1 0x68080
		/**
		/*
		* Enables automatic scaling calculation.
		*
		* If set, the rest of the registers are ignored, and the calculated values can
		* be read back from the register.
		*/
		# define TV_AUTO_SCALE (1 << 31)
		/**
		/*
		* Disables the vertical filter.
		*
		* This is required on modes more than 1024 pixels wide */
		# define TV_V_FILTER_BYPASS (1 << 29)
		/** Enables adaptive vertical filtering */
		/* Enables adaptive vertical filtering */
		# define TV_VADAPT (1 << 28)
		# define TV_VADAPT_MODE_MASK (3 << 26)
		/** Selects the least adaptive vertical filtering mode */
		/* Selects the least adaptive vertical filtering mode */
		# define TV_VADAPT_MODE_LEAST (0 << 26)
		/** Selects the moderately adaptive vertical filtering mode */
		/* Selects the moderately adaptive vertical filtering mode */
		# define TV_VADAPT_MODE_MODERATE (1 << 26)
		/** Selects the most adaptive vertical filtering mode */
		/* Selects the most adaptive vertical filtering mode */
		# define TV_VADAPT_MODE_MOST (3 << 26)
		/**
		/*
		* Sets the horizontal scaling factor.
		*
		* This should be the fractional part of the horizontal scaling factor divided
		@@ -3236,14 +3236,14 @@ enum punit_power_well {
		# define TV_HSCALE_FRAC_SHIFT 0

		#define TV_FILTER_CTL_2 0x68084
		/**
		/*
		* Sets the integer part of the 3.15 fixed-point vertical scaling factor.
		*
		* TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1)
		*/
		# define TV_VSCALE_INT_MASK 0x00038000
		# define TV_VSCALE_INT_SHIFT 15
		/**
		/*
		* Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
		*
		* \sa TV_VSCALE_INT_MASK
		@@ -3252,7 +3252,7 @@ enum punit_power_well {
		# define TV_VSCALE_FRAC_SHIFT 0

		#define TV_FILTER_CTL_3 0x68088
		/**
		/*
		* Sets the integer part of the 3.15 fixed-point vertical scaling factor.
		*
		* TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1))
		@@ -3261,7 +3261,7 @@ enum punit_power_well {
		*/
		# define TV_VSCALE_IP_INT_MASK 0x00038000
		# define TV_VSCALE_IP_INT_SHIFT 15
		/**
		/*
		* Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
		*
		* For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
		@@ -3273,26 +3273,26 @@ enum punit_power_well {

		#define TV_CC_CONTROL 0x68090
		# define TV_CC_ENABLE (1 << 31)
		/**
		/*
		* Specifies which field to send the CC data in.
		*
		* CC data is usually sent in field 0.
		*/
		# define TV_CC_FID_MASK (1 << 27)
		# define TV_CC_FID_SHIFT 27
		/** Sets the horizontal position of the CC data. Usually 135. */
		/* Sets the horizontal position of the CC data. Usually 135. */
		# define TV_CC_HOFF_MASK 0x03ff0000
		# define TV_CC_HOFF_SHIFT 16
		/** Sets the vertical position of the CC data. Usually 21 */
		/* Sets the vertical position of the CC data. Usually 21 */
		# define TV_CC_LINE_MASK 0x0000003f
		# define TV_CC_LINE_SHIFT 0

		#define TV_CC_DATA 0x68094
		# define TV_CC_RDY (1 << 31)
		/** Second word of CC data to be transmitted. */
		/* Second word of CC data to be transmitted. */
		# define TV_CC_DATA_2_MASK 0x007f0000
		# define TV_CC_DATA_2_SHIFT 16
		/** First word of CC data to be transmitted. */
		/* First word of CC data to be transmitted. */
		# define TV_CC_DATA_1_MASK 0x0000007f
		# define TV_CC_DATA_1_SHIFT 0

		@@ -3363,32 +3363,32 @@ enum punit_power_well {
		#define DP_PLL_FREQ_160MHZ (1 << 16)
		#define DP_PLL_FREQ_MASK (3 << 16)

		/** locked once port is enabled */
		/* locked once port is enabled */
		#define DP_PORT_REVERSAL (1 << 15)

		/* eDP */
		#define DP_PLL_ENABLE (1 << 14)

		/** sends the clock on lane 15 of the PEG for debug */
		/* sends the clock on lane 15 of the PEG for debug */
		#define DP_CLOCK_OUTPUT_ENABLE (1 << 13)

		#define DP_SCRAMBLING_DISABLE (1 << 12)
		#define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7)

		/** limit RGB values to avoid confusing TVs */
		/* limit RGB values to avoid confusing TVs */
		#define DP_COLOR_RANGE_16_235 (1 << 8)

		/** Turn on the audio link */
		/* Turn on the audio link */
		#define DP_AUDIO_OUTPUT_ENABLE (1 << 6)

		/** vs and hs sync polarity */
		/* vs and hs sync polarity */
		#define DP_SYNC_VS_HIGH (1 << 4)
		#define DP_SYNC_HS_HIGH (1 << 3)

		/** A fantasy */
		/* A fantasy */
		#define DP_DETECTED (1 << 2)

		/** The aux channel provides a way to talk to the
		/* The aux channel provides a way to talk to the
		* signal sink for DDC etc. Max packet size supported
		* is 20 bytes in each direction, hence the 5 fixed
		* data registers