include: camera: Backport 4.14 uapi headers (643db563) · Commits · e / devices / android_kernel_fairphone_FP3

include/uapi/media/cam_defs.h

+151 −0

Original line number	Diff line number	Diff line
		@@ -18,6 +18,10 @@
		#define CAM_FLUSH_REQ (CAM_COMMON_OPCODE_BASE + 0x8)
		#define CAM_COMMON_OPCODE_MAX (CAM_COMMON_OPCODE_BASE + 0x9)

		#define CAM_COMMON_OPCODE_BASE_v2 0x150
		#define CAM_ACQUIRE_HW (CAM_COMMON_OPCODE_BASE_v2 + 0x1)
		#define CAM_RELEASE_HW (CAM_COMMON_OPCODE_BASE_v2 + 0x2)

		#define CAM_EXT_OPCODE_BASE 0x200
		#define CAM_CONFIG_DEV_EXTERNAL (CAM_EXT_OPCODE_BASE + 0x1)

		@@ -43,6 +47,9 @@
		#define CAM_CMD_BUF_GENERIC 0x9
		#define CAM_CMD_BUF_LEGACY 0xA

		/* UBWC API Version */
		#define CAM_UBWC_CFG_VERSION_1 1

		/**
		* enum flush_type_t - Identifies the various flush types
		*
		@@ -235,6 +242,34 @@ struct cam_plane_cfg {
		uint32_t v_init;
		};

		/**
		* struct cam_ubwc_plane_cfg_v1 - UBWC Plane configuration info
		*
		* @port_type: Port Type
		* @meta_stride: UBWC metadata stride
		* @meta_size: UBWC metadata plane size
		* @meta_offset: UBWC metadata offset
		* @packer_config: UBWC packer config
		* @mode_config_0: UBWC mode config 0
		* @mode_config_1: UBWC 3 mode config 1
		* @tile_config: UBWC tile config
		* @h_init: UBWC horizontal initial coordinate in pixels
		* @v_init: UBWC vertical initial coordinate in lines
		*
		*/
		struct cam_ubwc_plane_cfg_v1 {
		uint32_t port_type;
		uint32_t meta_stride;
		uint32_t meta_size;
		uint32_t meta_offset;
		uint32_t packer_config;
		uint32_t mode_config_0;
		uint32_t mode_config_1;
		uint32_t tile_config;
		uint32_t h_init;
		uint32_t v_init;
		};

		/**
		* struct cam_cmd_buf_desc - Command buffer descriptor
		*
		@@ -452,6 +487,73 @@ struct cam_acquire_dev_cmd {
		uint64_t resource_hdl;
		};

		/*
		* In old version, while acquiring device the num_resources in
		* struct cam_acquire_dev_cmd will be a valid value. During ACQUIRE_DEV
		* KMD driver will return dev_handle as well as associate HW to handle.
		* If num_resources is set to the constant below, we are using
		* the new version and we do not acquire HW in ACQUIRE_DEV IOCTL.
		* ACQUIRE_DEV will only return handle and we should receive
		* ACQUIRE_HW IOCTL after ACQUIRE_DEV and that is when the HW
		* is associated with the dev_handle.
		*
		* (Data type): uint32_t
		*/
		#define CAM_API_COMPAT_CONSTANT 0xFEFEFEFE

		#define CAM_ACQUIRE_HW_STRUCT_VERSION_1 1

		/**
		* struct cam_acquire_hw_cmd_v1 - Control payload for acquire HW IOCTL (Ver 1)
		*
		* @struct_version: = CAM_ACQUIRE_HW_STRUCT_VERSION_1 for this struct
		* This value should be the first 32-bits in any structure
		* related to this IOCTL. So that if the struct needs to
		* change, we can first read the starting 32-bits, get the
		* version number and then typecast the data to struct
		* accordingly.
		* @reserved: Reserved field for 64-bit alignment
		* @session_handle: Session handle for the acquire command
		* @dev_handle: Device handle to be returned
		* @handle_type: Tells you how to interpret the variable resource_hdl-
		* 1 = user pointer, 2 = mem handle
		* @data_size: Total size of data contained in memory pointed
		* to by resource_hdl
		* @resource_hdl: Resource handle that refers to the actual
		* resource data.
		*/
		struct cam_acquire_hw_cmd_v1 {
		uint32_t struct_version;
		uint32_t reserved;
		int32_t session_handle;
		int32_t dev_handle;
		uint32_t handle_type;
		uint32_t data_size;
		uint64_t resource_hdl;
		};

		#define CAM_RELEASE_HW_STRUCT_VERSION_1 1

		/**
		* struct cam_release_hw_cmd_v1 - Control payload for release HW IOCTL (Ver 1)
		*
		* @struct_version: = CAM_RELEASE_HW_STRUCT_VERSION_1 for this struct
		* This value should be the first 32-bits in any structure
		* related to this IOCTL. So that if the struct needs to
		* change, we can first read the starting 32-bits, get the
		* version number and then typecast the data to struct
		* accordingly.
		* @reserved: Reserved field for 64-bit alignment
		* @session_handle: Session handle for the release
		* @dev_handle: Device handle for the release
		*/
		struct cam_release_hw_cmd_v1 {
		uint32_t struct_version;
		uint32_t reserved;
		int32_t session_handle;
		int32_t dev_handle;
		};

		/**
		* struct cam_flush_dev_cmd - Control payload for flush devices
		*
		@@ -474,4 +576,53 @@ struct cam_flush_dev_cmd {
		int64_t req_id;
		};

		/**
		* struct cam_ubwc_config - UBWC Configuration Payload
		*
		* @api_version: UBWC config api version
		* @num_ports: Number of ports to be configured
		* @ubwc_plane_config: Array of UBWC configurations per port
		* Size [CAM_PACKET_MAX_PLANES - 1] per port
		* as UBWC is supported on Y & C planes
		* and therefore a max size of 2 planes
		*
		*/
		struct cam_ubwc_config {
		uint32_t api_version;
		uint32_t num_ports;
		struct cam_ubwc_plane_cfg_v1
		ubwc_plane_cfg[1][CAM_PACKET_MAX_PLANES - 1];
		};

		/**
		* struct cam_cmd_mem_region_info -
		* Cmd buffer region info
		*
		* @mem_handle : Memory handle of the region
		* @offset : Offset if any
		* @size : Size of the region
		* @flags : Flags if any
		*/
		struct cam_cmd_mem_region_info {
		int32_t mem_handle;
		uint32_t offset;
		uint32_t size;
		uint32_t flags;
		};

		/**
		* struct cam_cmd_mem_regions -
		* List of multiple memory descriptors of
		* of different regions
		*
		* @version : Version number
		* @num_regions : Number of regions
		* @map_info_array : Array of all the regions
		*/
		struct cam_cmd_mem_regions {
		uint32_t version;
		uint32_t num_regions;
		struct cam_cmd_mem_region_info map_info_array[1];
		};

		#endif /* __UAPI_CAM_DEFS_H__ */

include/uapi/media/cam_icp.h

+4 −0

Original line number	Diff line number	Diff line
		@@ -20,6 +20,8 @@
		/* packet opcode types */
		#define CAM_ICP_OPCODE_IPE_UPDATE 0
		#define CAM_ICP_OPCODE_BPS_UPDATE 1
		#define CAM_ICP_OPCODE_IPE_SETTINGS 2
		#define CAM_ICP_OPCODE_BPS_SETTINGS 3

		/* IPE input port resource type */
		#define CAM_ICP_IPE_INPUT_IMAGE_FULL 0x0
		@@ -62,6 +64,8 @@
		/* Generic blob types */
		#define CAM_ICP_CMD_GENERIC_BLOB_CLK 0x1
		#define CAM_ICP_CMD_GENERIC_BLOB_CFG_IO 0x2
		#define CAM_ICP_CMD_GENERIC_BLOB_FW_MEM_MAP 0x3
		#define CAM_ICP_CMD_GENERIC_BLOB_FW_MEM_UNMAP 0x4

		/**
		* struct cam_icp_clk_bw_request

include/uapi/media/cam_isp.h

+48 −3

Original line number	Diff line number	Diff line
		@@ -87,6 +87,8 @@
		#define CAM_ISP_GENERIC_BLOB_TYPE_HFR_CONFIG 0
		#define CAM_ISP_GENERIC_BLOB_TYPE_CLOCK_CONFIG 1
		#define CAM_ISP_GENERIC_BLOB_TYPE_BW_CONFIG 2
		#define CAM_ISP_GENERIC_BLOB_TYPE_UBWC_CONFIG 3
		#define CAM_ISP_GENERIC_BLOB_TYPE_CSID_CLOCK_CONFIG 4

		/* Query devices */
		/**
		@@ -341,6 +343,15 @@ struct cam_isp_clock_config {
		uint64_t rdi_hz[1];
		} __attribute__((packed));

		/**
		* struct cam_isp_csid_clock_config - CSID clock configuration
		*
		* @csid_clock CSID clock
		*/
		struct cam_isp_csid_clock_config {
		uint64_t csid_clock;
		} __attribute__((packed));

		/**
		* struct cam_isp_bw_vote - Bandwidth vote information
		*
		@@ -375,4 +386,38 @@ struct cam_isp_bw_config {
		struct cam_isp_bw_vote rdi_vote[1];
		} __attribute__((packed));


		/* Acquire Device/HW v2 */

		/**
		* struct cam_isp_acquire_hw_info - ISP acquire HW params
		*
		* @common_info_version : Version of common info struct used
		* @common_info_size : Size of common info struct used
		* @common_info_offset : Offset of common info from start of data
		* @num_inputs : Number of inputs
		* @input_info_version : Version of input info struct used
		* @input_info_size : Size of input info struct used
		* @input_info_offset : Offset of input info from start of data
		* @data : Start of data region
		*/
		struct cam_isp_acquire_hw_info {
		uint16_t common_info_version;
		uint16_t common_info_size;
		uint32_t common_info_offset;
		uint32_t num_inputs;
		uint32_t input_info_version;
		uint32_t input_info_size;
		uint32_t input_info_offset;
		uint64_t data;
		};

		#define CAM_ISP_ACQUIRE_COMMON_VER0 0x1000

		#define CAM_ISP_ACQUIRE_COMMON_SIZE_VER0 0x0

		#define CAM_ISP_ACQUIRE_INPUT_VER0 0x2000

		#define CAM_ISP_ACQUIRE_OUT_VER0 0x3000

		#endif /* __UAPI_CAM_ISP_H__ */

include/uapi/media/cam_isp_ife.h

+6 −3

Original line number	Diff line number	Diff line
		@@ -23,8 +23,11 @@
		#define CAM_ISP_IFE_OUT_RES_STATS_RS (CAM_ISP_IFE_OUT_RES_BASE + 16)
		#define CAM_ISP_IFE_OUT_RES_STATS_CS (CAM_ISP_IFE_OUT_RES_BASE + 17)
		#define CAM_ISP_IFE_OUT_RES_STATS_IHIST (CAM_ISP_IFE_OUT_RES_BASE + 18)
		#define CAM_ISP_IFE_OUT_RES_MAX (CAM_ISP_IFE_OUT_RES_BASE + 19)

		#define CAM_ISP_IFE_OUT_RES_FULL_DISP (CAM_ISP_IFE_OUT_RES_BASE + 19)
		#define CAM_ISP_IFE_OUT_RES_DS4_DISP (CAM_ISP_IFE_OUT_RES_BASE + 20)
		#define CAM_ISP_IFE_OUT_RES_DS16_DISP (CAM_ISP_IFE_OUT_RES_BASE + 21)
		#define CAM_ISP_IFE_OUT_RES_2PD (CAM_ISP_IFE_OUT_RES_BASE + 22)
		#define CAM_ISP_IFE_OUT_RES_MAX (CAM_ISP_IFE_OUT_RES_BASE + 23)

		/IFE input port resource type (global unique) /
		#define CAM_ISP_IFE_IN_RES_BASE 0x4000