Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 631b16e8 authored by Joseph Lai's avatar Joseph Lai Committed by Dmitry Torokhov
Browse files

Input: add a driver to support InvenSense mpu3050 gyroscope chip 



This driver is registered as an input device. An IRQ is required in this
basic driver configuration.

Signed-off-by: default avatarJoseph Lai <joseph_lai@wistron.com>
[Cleaned up PM_RUNTIME defines]
Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
[dtor@mail.ru: consolidated PM methods, some code rearrangement]
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 7c409522

drivers/input/misc/Kconfig

+10 −0
Original line number Diff line number Diff line
@@ -111,6 +111,16 @@ config INPUT_MMA8450 
	  To compile this driver as a module, choose M here: the

	  module will be called mma8450.



config INPUT_MPU3050

	tristate "MPU3050 Triaxial gyroscope sensor"

	depends on I2C

	help

	  Say Y here if you want to support InvenSense MPU3050

	  connected via an I2C bus.



	  To compile this driver as a module, choose M here: the

	  module will be called mpu3050.



config INPUT_APANEL

	tristate "Fujitsu Lifebook Application Panel buttons"

	depends on X86 && I2C && LEDS_CLASS

drivers/input/misc/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -28,6 +28,7 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o 
obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o

obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o

obj-$(CONFIG_INPUT_MMA8450)		+= mma8450.o

obj-$(CONFIG_INPUT_MPU3050)		+= mpu3050.o

obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o

obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o

obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o

drivers/input/misc/mpu3050.c

0 → 100644
+376 −0
Original line number Diff line number Diff line 
/*

 * MPU3050 Tri-axis gyroscope driver

 *

 * Copyright (C) 2011 Wistron Co.Ltd

 * Joseph Lai <joseph_lai@wistron.com>

 *

 * Trimmed down by Alan Cox <alan@linux.intel.com> to produce this version

 *

 * This is a 'lite' version of the driver, while we consider the right way

 * to present the other features to user space. In particular it requires the

 * device has an IRQ, and it only provides an input interface, so is not much

 * use for device orientation. A fuller version is available from the Meego

 * tree.

 *

 * This program is based on bma023.c.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; version 2 of the License.

 *

 * This program is distributed in the hope that it will be useful, but

 * WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

 * General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License along

 * with this program; if not, write to the Free Software Foundation, Inc.,

 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

 *

 */



#include <linux/module.h>

#include <linux/init.h>

#include <linux/interrupt.h>

#include <linux/platform_device.h>

#include <linux/mutex.h>

#include <linux/err.h>

#include <linux/i2c.h>

#include <linux/input.h>

#include <linux/delay.h>

#include <linux/slab.h>

#include <linux/pm_runtime.h>



#define MPU3050_CHIP_ID_REG	0x00

#define MPU3050_CHIP_ID		0x69

#define MPU3050_XOUT_H		0x1D

#define MPU3050_PWR_MGM		0x3E

#define MPU3050_PWR_MGM_POS	6

#define MPU3050_PWR_MGM_MASK	0x40



#define MPU3050_AUTO_DELAY	1000



#define MPU3050_MIN_VALUE	-32768

#define MPU3050_MAX_VALUE	32767



struct axis_data {

	s16 x;

	s16 y;

	s16 z;

};



struct mpu3050_sensor {

	struct i2c_client *client;

	struct device *dev;

	struct input_dev *idev;

};



/**

 *	mpu3050_xyz_read_reg	-	read the axes values

 *	@buffer: provide register addr and get register

 *	@length: length of register

 *

 *	Reads the register values in one transaction or returns a negative

 *	error code on failure.

 */

static int mpu3050_xyz_read_reg(struct i2c_client *client,

			       u8 *buffer, int length)

{

	/*

	 * Annoying we can't make this const because the i2c layer doesn't

	 * declare input buffers const.

	 */

	char cmd = MPU3050_XOUT_H;

	struct i2c_msg msg[] = {

		{

			.addr = client->addr,

			.flags = 0,

			.len = 1,

			.buf = &cmd,

		},

		{

			.addr = client->addr,

			.flags = I2C_M_RD,

			.len = length,

			.buf = buffer,

		},

	};



	return i2c_transfer(client->adapter, msg, 2);

}



/**

 *	mpu3050_read_xyz	-	get co-ordinates from device

 *	@client: i2c address of sensor

 *	@coords: co-ordinates to update

 *

 *	Return the converted X Y and Z co-ordinates from the sensor device

 */

static void mpu3050_read_xyz(struct i2c_client *client,

			     struct axis_data *coords)

{

	u16 buffer[3];



	mpu3050_xyz_read_reg(client, (u8 *)buffer, 6);

	coords->x = be16_to_cpu(buffer[0]);

	coords->y = be16_to_cpu(buffer[1]);

	coords->z = be16_to_cpu(buffer[2]);

	dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__,

					coords->x, coords->y, coords->z);

}



/**

 *	mpu3050_set_power_mode	-	set the power mode

 *	@client: i2c client for the sensor

 *	@val: value to switch on/off of power, 1: normal power, 0: low power

 *

 *	Put device to normal-power mode or low-power mode.

 */

static void mpu3050_set_power_mode(struct i2c_client *client, u8 val)

{

	u8 value;



	value = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM);

	value = (value & ~MPU3050_PWR_MGM_MASK) |

		(((val << MPU3050_PWR_MGM_POS) & MPU3050_PWR_MGM_MASK) ^

		 MPU3050_PWR_MGM_MASK);

	i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, value);

}



/**

 *	mpu3050_input_open	-	called on input event open

 *	@input: input dev of opened device

 *

 *	The input layer calls this function when input event is opened. The

 *	function will push the device to resume. Then, the device is ready

 *	to provide data.

 */

static int mpu3050_input_open(struct input_dev *input)

{

	struct mpu3050_sensor *sensor = input_get_drvdata(input);



	pm_runtime_get(sensor->dev);



	return 0;

}



/**

 *	mpu3050_input_close	-	called on input event close

 *	@input: input dev of closed device

 *

 *	The input layer calls this function when input event is closed. The

 *	function will push the device to suspend.

 */

static void mpu3050_input_close(struct input_dev *input)

{

	struct mpu3050_sensor *sensor = input_get_drvdata(input);



	pm_runtime_put(sensor->dev);

}



/**

 *	mpu3050_interrupt_thread	-	handle an IRQ

 *	@irq: interrupt numner

 *	@data: the sensor

 *

 *	Called by the kernel single threaded after an interrupt occurs. Read

 *	the sensor data and generate an input event for it.

 */

static irqreturn_t mpu3050_interrupt_thread(int irq, void *data)

{

	struct mpu3050_sensor *sensor = data;

	struct axis_data axis;



	mpu3050_read_xyz(sensor->client, &axis);



	input_report_abs(sensor->idev, ABS_X, axis.x);

	input_report_abs(sensor->idev, ABS_Y, axis.y);

	input_report_abs(sensor->idev, ABS_Z, axis.z);

	input_sync(sensor->idev);



	return IRQ_HANDLED;

}



/**

 *	mpu3050_probe	-	device detection callback

 *	@client: i2c client of found device

 *	@id: id match information

 *

 *	The I2C layer calls us when it believes a sensor is present at this

 *	address. Probe to see if this is correct and to validate the device.

 *

 *	If present install the relevant sysfs interfaces and input device.

 */

static int __devinit mpu3050_probe(struct i2c_client *client,

				   const struct i2c_device_id *id)

{

	struct mpu3050_sensor *sensor;

	struct input_dev *idev;

	int ret;

	int error;



	sensor = kzalloc(sizeof(struct mpu3050_sensor), GFP_KERNEL);

	idev = input_allocate_device();

	if (!sensor || !idev) {

		dev_err(&client->dev, "failed to allocate driver data\n");

		error = -ENOMEM;

		goto err_free_mem;

	}



	sensor->client = client;

	sensor->dev = &client->dev;

	sensor->idev = idev;



	mpu3050_set_power_mode(client, 1);

	msleep(10);



	ret = i2c_smbus_read_byte_data(client, MPU3050_CHIP_ID_REG);

	if (ret < 0) {

		dev_err(&client->dev, "failed to detect device\n");

		error = -ENXIO;

		goto err_free_mem;

	}



	if (ret != MPU3050_CHIP_ID) {

		dev_err(&client->dev, "unsupported chip id\n");

		error = -ENXIO;

		goto err_free_mem;

	}



	idev->name = "MPU3050";

	idev->id.bustype = BUS_I2C;

	idev->dev.parent = &client->dev;



	idev->open = mpu3050_input_open;

	idev->close = mpu3050_input_close;



	__set_bit(EV_ABS, idev->evbit);

	input_set_abs_params(idev, ABS_X,

			     MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);

	input_set_abs_params(idev, ABS_Y,

			     MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);

	input_set_abs_params(idev, ABS_Z,

			     MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);



	input_set_drvdata(idev, sensor);



	pm_runtime_set_active(&client->dev);



	error = request_threaded_irq(client->irq,

				     NULL, mpu3050_interrupt_thread,

				     IRQF_TRIGGER_RISING,

				     "mpu_int", sensor);

	if (error) {

		dev_err(&client->dev,

			"can't get IRQ %d, error %d\n", client->irq, error);

		goto err_pm_set_suspended;

	}



	error = input_register_device(idev);

	if (error) {

		dev_err(&client->dev, "failed to register input device\n");

		goto err_free_irq;

	}



	pm_runtime_enable(&client->dev);

	pm_runtime_set_autosuspend_delay(&client->dev, MPU3050_AUTO_DELAY);



	return 0;



err_free_irq:

	free_irq(client->irq, sensor);

err_pm_set_suspended:

	pm_runtime_set_suspended(&client->dev);

err_free_mem:

	input_unregister_device(idev);

	kfree(sensor);

	return error;

}



/**

 *	mpu3050_remove	-	remove a sensor

 *	@client: i2c client of sensor being removed

 *

 *	Our sensor is going away, clean up the resources.

 */

static int __devexit mpu3050_remove(struct i2c_client *client)

{

	struct mpu3050_sensor *sensor = i2c_get_clientdata(client);



	pm_runtime_disable(&client->dev);

	pm_runtime_set_suspended(&client->dev);



	free_irq(client->irq, sensor);

	input_unregister_device(sensor->idev);

	kfree(sensor);



	return 0;

}



#ifdef CONFIG_PM

/**

 *	mpu3050_suspend		-	called on device suspend

 *	@dev: device being suspended

 *

 *	Put the device into sleep mode before we suspend the machine.

 */

static int mpu3050_suspend(struct device *dev)

{

	struct i2c_client *client = to_i2c_client(dev);



	mpu3050_set_power_mode(client, 0);



	return 0;

}



/**

 *	mpu3050_resume		-	called on device resume

 *	@dev: device being resumed

 *

 *	Put the device into powered mode on resume.

 */

static int mpu3050_resume(struct device *dev)

{

	struct i2c_client *client = to_i2c_client(dev);



	mpu3050_set_power_mode(client, 1);

	msleep(100);  /* wait for gyro chip resume */



	return 0;

}

#endif



static UNIVERSAL_DEV_PM_OPS(mpu3050_pm, mpu3050_suspend, mpu3050_resume, NULL);



static const struct i2c_device_id mpu3050_ids[] = {

	{ "mpu3050", 0 },

	{ }

};

MODULE_DEVICE_TABLE(i2c, mpu3050_ids);



static struct i2c_driver mpu3050_i2c_driver = {

	.driver	= {

		.name	= "mpu3050",

		.owner	= THIS_MODULE,

		.pm	= &mpu3050_pm,

	},

	.probe		= mpu3050_probe,

	.remove		= __devexit_p(mpu3050_remove),

	.id_table	= mpu3050_ids,

};



static int __init mpu3050_init(void)

{

	return i2c_add_driver(&mpu3050_i2c_driver);

}

module_init(mpu3050_init);



static void __exit mpu3050_exit(void)

{

	i2c_del_driver(&mpu3050_i2c_driver);

}

module_exit(mpu3050_exit);



MODULE_AUTHOR("Wistron Corp.");

MODULE_DESCRIPTION("MPU3050 Tri-axis gyroscope driver");

MODULE_LICENSE("GPL");