Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 5cc52bda authored by Venkata Prahlad Valluru's avatar Venkata Prahlad Valluru Committed by Gerrit - the friendly Code Review server
Browse files

ARM: msm: dts: add support for auo 416p cmd panel on SDM429+BG 



Add panel dt file with on/off command sequence and
other panel details. Add panel power supply details
for spyro targets. And select panel for sdm429+BG targets
with corresponding supply entries.

Change-Id: I2947f4321b042f6045904c80db4905b235321058
Signed-off-by: default avatarVenkata Prahlad Valluru <vvalluru@codeaurora.org>
parent bf47a869

arch/arm64/boot/dts/qcom/dsi-panel-auo-416p-amoled-cmd.dtsi

0 → 100644
+121 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2020, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_auo_416p_amoled_cmd: qcom,mdss_dsi_auo_416p_amoled_cmd {

	qcom,mdss-dsi-panel-name = "AUO 416p AMOLED command mode dsi panel";

		qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-panel-destination = "display_1";

		qcom,mdss-dsi-panel-framerate = <45>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <416>;

		qcom,mdss-dsi-panel-height = <416>;

		qcom,mdss-dsi-h-front-porch = <4>;

		qcom,mdss-dsi-h-back-porch = <6>;

		qcom,mdss-dsi-h-pulse-width = <4>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <1>;

		qcom,mdss-dsi-v-front-porch = <1>;

		qcom,mdss-dsi-v-pulse-width = <2>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-pixel-packing = "tight";

		qcom,mdss-dsi-pixel-alignment = <0>;

		qcom,mdss-dsi-on-command = [

			05 01 00 00 01 00 02 00 00

			15 01 00 00 00 00 02 FE 01

			15 01 00 00 00 00 02 0A F0

			15 01 00 00 00 00 02 FE 00

			29 01 00 00 00 00 05 2A 00 1E 01 BD

			29 01 00 00 00 00 05 2B 00 00 01 9F

			29 01 00 00 00 00 05 30 00 00 01 9F

			29 01 00 00 00 00 05 31 00 1E 01 BD

			05 01 00 00 00 00 02 12 00

			15 01 00 00 00 00 02 35 02

			15 01 00 00 00 00 02 53 20

			15 01 00 00 00 00 02 51 FF

			15 01 00 00 28 00 02 66 00

			15 01 00 00 00 00 02 63 FF

			05 01 00 00 32 00 02 11 00

			05 01 00 00 1E 00 02 29 00

		];

			/*15 01 00 00 00 00 02 51 00*/

		qcom,mdss-dsi-off-command = [

			05 01 00 00 00 00 02 28 00

			05 01 00 00 78 00 02 10 00

		];

		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

		qcom,mdss-dsi-idle-on-command = [

			15 01 00 00 46 00 02 FE 00

			05 01 00 00 00 00 01 39

		];

		qcom,mdss-dsi-idle-on-command-state = "dsi_hs_mode";

		/*TODO: will remove set colum/row address*/

		qcom,mdss-dsi-idle-off-command = [

			05 01 00 00 1f 00 01 38 /* Idle-Mode Off  */

			15 01 00 00 00 00 02 FE 00

			29 01 00 00 00 00 05 2A 00 1E 01 BD

			29 01 00 00 00 00 05 2B 00 00 01 9F

			29 01 00 00 00 00 05 30 00 00 01 9F

			29 01 00 00 00 00 05 31 00 1E 01 BD

			05 01 00 00 00 00 02 12 00

		];



		qcom,mdss-dsi-hbm0-on-command = [

			15 01 00 00 00 00 02 FE 01

			15 01 00 00 00 00 02 11 93

			15 01 00 00 00 00 02 FE 00

			15 01 00 00 00 00 02 66 02

		];

		qcom,mdss-dsi-hbm-off-command = [

			15 01 00 00 00 00 02 FE 00

			15 01 00 00 28 00 02 66 00

			15 01 00 00 00 00 02 FE 01

			15 01 00 00 00 00 02 11 80

			15 01 00 00 00 00 02 FE 00

		];

		qcom,mdss-dsi-h-sync-pulse = <1>;

		qcom,mdss-dsi-traffic-mode = "burst_mode";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-tear-check-frame-rate = <4500>;

		qcom,mdss-dsi-idle-fps = <15>;

		/* clk = totlaH * totalV * bpp* 60fps */

		qcom,mdss-dsi-panel-clockrate = <308655360>;

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-panel-timings = [

			4E 0E 08 00 2E 30 0E 12 0A 03 04 00

		];

		qcom,mdss-dsi-t-clk-post = <0x05>;

		qcom,mdss-dsi-t-clk-pre = <0x12>;

		qcom,mdss-dsi-bl-min-level = <1>;

		qcom,mdss-dsi-bl-max-level = <255>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

		qcom,mdss-dsi-reset-sequence = <1 20>, <0 20>, <1 20>;

	};

};

arch/arm64/boot/dts/qcom/sda429-bg-wtp-overlay.dts

+12 −1
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2019, The Linux Foundation. All rights reserved.

 * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -136,6 +136,17 @@ 
	};

};



&mdss_dsi0 {

	qcom,dsi-pref-prim-pan = <&dsi_auo_416p_amoled_cmd>;

	/delete-property/ vdd-supply;

	vddio-supply = <&L11A>;

	qcom,platform-enable-gpio = <&pm660_gpios 12 0>;

};



&dsi_pm660_panel_pwr_supply {

	/delete-node/ qcom,panel-supply-entry@0;

};



&usb_otg {

	HSUSB_3p3-supply = <&L16A>;

};

arch/arm64/boot/dts/qcom/sdm429-bg-wtp-overlay.dts

+12 −1
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2019, The Linux Foundation. All rights reserved.

 * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -136,6 +136,17 @@ 
	};

};



&mdss_dsi0 {

	qcom,dsi-pref-prim-pan = <&dsi_auo_416p_amoled_cmd>;

	/delete-property/ vdd-supply;

	vddio-supply = <&L11A>;

	qcom,platform-enable-gpio = <&pm660_gpios 12 0>;

};



&dsi_pm660_panel_pwr_supply {

	/delete-node/ qcom,panel-supply-entry@0;

};



&usb_otg {

	HSUSB_3p3-supply = <&L16A>;

};

arch/arm64/boot/dts/qcom/sdm429-spyro-qrd-mdss-panels.dtsi

+12 −2
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2019, The Linux Foundation. All rights reserved.

 * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -10,9 +10,9 @@ 
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include "dsi-panel-edo-rm67162-qvga-cmd.dtsi"

#include "dsi-panel-truly-rm69090-qvga-cmd.dtsi"

#include "dsi-panel-auo-416p-amoled-cmd.dtsi"



&soc {

	dsi_pm660_panel_pwr_supply: dsi_pm660_panel_pwr_supply {
@@ -100,3 +100,13 @@ 
	qcom,esd-check-enabled;

	qcom,mdss-dsi-panel-status-check-mode = "te_signal_check";

};



&dsi_auo_416p_amoled_cmd {

	/delete-property/ qcom,mdss-dsi-panel-timings;

	qcom,mdss-dsi-panel-timings-phy-12nm = [06 05 01 0A 00 03 01 0F];

	qcom,panel-supply-entries = <&dsi_pm660_panel_pwr_supply>;

	qcom,esd-check-enabled;

	qcom,mdss-dsi-panel-status-check-mode = "te_signal_check";

	qcom,mdss-dsi-power-off-disable;

	qcom,mdss-dsi-tear-disable;

};