Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 52bc3462 authored by Soeren Moch's avatar Soeren Moch Committed by Shawn Guo
Browse files

ARM: dts: add initial support for TBS2910 Matrix ARM mini PC 

TBS2910 is a i.MX6Q based board. For additional details refer to
http://www.tbsdtv.com/products/tbs2910-matrix-arm-mini-pc.html



Signed-off-by: default avatarSoeren Moch <smoch@web.de>
Reviewed-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent c3096cd4

arch/arm/boot/dts/Makefile

+1 −0
Original line number Original line Diff line number Diff line
@@ -240,6 +240,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ 
	imx6q-sabrelite.dtb \

	imx6q-sabrelite.dtb \

	imx6q-sabresd.dtb \

	imx6q-sabresd.dtb \

	imx6q-sbc6x.dtb \

	imx6q-sbc6x.dtb \

	imx6q-tbs2910.dtb \

	imx6q-udoo.dtb \

	imx6q-udoo.dtb \

	imx6q-wandboard.dtb \

	imx6q-wandboard.dtb \

	imx6q-wandboard-revb1.dtb \

	imx6q-wandboard-revb1.dtb \

arch/arm/boot/dts/imx6q-tbs2910.dts

0 → 100644
+429 −0
Original line number Original line Diff line number Diff line 
/*

 * Copyright 2014 Soeren Moch <smoch@web.de>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of

 *     the License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 *     You should have received a copy of the GNU General Public

 *     License along with this file; if not, write to the Free

 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,

 *     MA 02110-1301 USA

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;



#include "imx6q.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>



/ {

	model = "TBS2910 Matrix ARM mini PC";

	compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";



	chosen {

		stdout-path = &uart1;

	};



	memory {

		reg = <0x10000000 0x80000000>;

	};



	fan {

		compatible = "gpio-fan";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpio_fan>;

		gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;

		gpio-fan,speed-map = <0    0

				      3000 1>;

	};



	ir_recv {

		compatible = "gpio-ir-receiver";

		gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_ir>;

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpio_leds>;



		blue {

			label = "blue_status_led";

			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;

			default-state = "keep";

		};

	};



	regulators {

		compatible = "simple-bus";

		#address-cells = <1>;

		#size-cells = <0>;



		reg_2p5v: regulator@0 {

			compatible = "regulator-fixed";

			reg = <0>;

			regulator-name = "2P5V";

			regulator-min-microvolt = <2500000>;

			regulator-max-microvolt = <2500000>;

		};



		reg_3p3v: regulator@1 {

			compatible = "regulator-fixed";

			reg = <1>;

			regulator-name = "3P3V";

			regulator-min-microvolt = <3300000>;

			regulator-max-microvolt = <3300000>;

		};



		reg_5p0v: regulator@2 {

			compatible = "regulator-fixed";

			reg = <2>;

			regulator-name = "5P0V";

			regulator-min-microvolt = <5000000>;

			regulator-max-microvolt = <5000000>;

		};

	};



	sound-sgtl5000 {

		audio-codec = <&sgtl5000>;

		audio-routing =

			"MIC_IN", "Mic Jack",

			"Mic Jack", "Mic Bias",

			"Headphone Jack", "HP_OUT";

		compatible = "fsl,imx-audio-sgtl5000";

		model = "On-board Codec";

		mux-ext-port = <3>;

		mux-int-port = <1>;

		ssi-controller = <&ssi1>;

	};



	sound-spdif {

		compatible = "fsl,imx-audio-spdif";

		model = "On-board SPDIF";

		spdif-controller = <&spdif>;

		spdif-out;

	};

};



&audmux {

	status = "okay";

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rgmii";

	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;

	status = "okay";

};



&hdmi {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_hdmi>;

	ddc-i2c-bus = <&i2c2>;

	status = "okay";

};



&i2c1 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c1>;

	status = "okay";



	sgtl5000: sgtl5000@0a {

		clocks = <&clks 201>;

		compatible = "fsl,sgtl5000";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_sgtl5000>;

		reg = <0x0a>;

		VDDA-supply = <&reg_2p5v>;

		VDDIO-supply = <&reg_3p3v>;

	};

};



&i2c2 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c2>;

	status = "okay";

};



&i2c3 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c3>;

	status = "okay";



	rtc: ds1307@68 {

		compatible = "dallas,ds1307";

		reg = <0x68>;

	};

};



&pcie {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pcie>;

	reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;

	status = "okay";

};



&sata {

	status = "okay";

};



&spdif {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_spdif>;

	status = "okay";

};



&ssi1 {

	fsl,mode = "i2s-slave";

	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart1>;

	status = "okay";

};



&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart2>;

	status = "okay";

};



&usbh1 {

	vbus-supply = <&reg_5p0v>;

	status = "okay";

};



&usbotg {

	vbus-supply = <&reg_5p0v>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usbotg>;

	disable-over-current;

	status = "okay";

};



&usdhc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc2>;

	bus-width = <4>;

	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;

	vmmc-supply = <&reg_3p3v>;

	status = "okay";

};



&usdhc3 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc3>;

	bus-width = <4>;

	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;

	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;

	vmmc-supply = <&reg_3p3v>;

	status = "okay";

};



&usdhc4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc4>;

	bus-width = <8>;

	non-removable;

	no-1-8-v;

	status = "okay";

};



&iomuxc {

	imx6q-tbs2910 {

		pinctrl_enet: enetgrp {

			fsl,pins = <

				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0

				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0

				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0

				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0

				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0

				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0

				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0

				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0

				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0

				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0

				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0

				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0

				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0

				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0

				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0

				MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8

				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059

			>;

		};



		pinctrl_hdmi: hdmigrp {

			fsl,pins = <

				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0

			>;

		};



		pinctrl_i2c1: i2c1grp {

			fsl,pins = <

				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1

				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1

			>;

		};



		pinctrl_i2c2: i2c2grp {

			fsl,pins = <

				MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1

				MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1

			>;

		};



		pinctrl_i2c3: i2c3grp {

			fsl,pins = <

				MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1

				MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1

			>;

		};



		pinctrl_ir: irgrp {

			fsl,pins = <

				MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059

			>;

		};



		pinctrl_pcie: pciegrp {

			fsl,pins = <

				MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059

			>;

		};



		pinctrl_sgtl5000: sgtl5000grp {

			fsl,pins = <

				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0

				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0

				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0

				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0

				MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0

			>;

		};



		pinctrl_spdif: spdifgrp {

			fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091

			>;

		};



		pinctrl_uart1: uart1grp {

			fsl,pins = <

				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1

				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1

			>;

		};



		pinctrl_uart2: uart2grp {

			fsl,pins = <

				MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1

				MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1

			>;

		};



		pinctrl_usbotg: usbotggrp {

			fsl,pins = <

				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059

			>;

		};



		pinctrl_usdhc2: usdhc2grp {

			fsl,pins = <

				MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059

				MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059

				MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059

				MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059

				MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059

				MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059

				MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059

			>;

		};



		pinctrl_usdhc3: usdhc3grp {

			fsl,pins = <

				MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059

				MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059

				MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059

				MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059

				MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059

				MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059

				MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059

				MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059

			>;

		};



		pinctrl_usdhc4: usdhc4grp {

			fsl,pins = <

				MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059

				MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059

				MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059

				MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059

				MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059

				MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059

				MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059

				MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059

				MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059

				MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059

			>;

		};

	};



	gpio_fan {

		pinctrl_gpio_fan: gpiofangrp {

			fsl,pins = <

				MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1

			>;

		};

	};



	gpio_leds {

		pinctrl_gpio_leds: gpioledsgrp {

			fsl,pins = <

				MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1

			>;

		};

	};

};