Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 4aef72db authored by Rajanikanth H.V's avatar Rajanikanth H.V Committed by Anton Vorontsov
Browse files

ab8500: Add devicetree support for charger 



This patch adds device tree support for ab8500-charger driver

Signed-off-by: default avatarRajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: default avatarAnton Vorontsov <anton.vorontsov@linaro.org>
parent bd9e8ab2

Documentation/devicetree/bindings/mfd/ab8500.txt

+14 −0
Original line number Diff line number Diff line
@@ -36,6 +36,20 @@ ab8500-btemp : : vtvout : Battery Temperature 
			 : BTEMP_LOW_MEDIUM     :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C

			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp

			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp

ab8500-charger		 :			: vddadc       : Charger interface

			 : MAIN_CH_UNPLUG_DET	:	       : main charger unplug detection management (not in 8505)

			 : MAIN_CHARGE_PLUG_DET	:	       : main charger plug detection management (not in 8505)

			 : MAIN_EXT_CH_NOT_OK	:	       : main charger not OK

			 : MAIN_CH_TH_PROT_R	:	       : Die temp is above main charger

			 : MAIN_CH_TH_PROT_F	:	       : Die temp is below main charger

			 : VBUS_DET_F		:	       : VBUS falling detected

			 : VBUS_DET_R		:	       : VBUS rising detected

			 : USB_LINK_STATUS	:	       : USB link status has changed

			 : USB_CH_TH_PROT_R	:	       : Die temp is above usb charger

			 : USB_CH_TH_PROT_F	:	       : Die temp is below usb charger

			 : USB_CHARGER_NOT_OKR	:	       : allowed USB charger not ok detection

			 : VBUS_OVV		:	       : Overvoltage on Vbus ball detected (USB charge is stopped)

			 : CH_WD_EXP		:	       : Charger watchdog detected

ab8500-gpadc             : HW_CONV_END          : vddadc       : Analogue to Digital Converter

                           SW_CONV_END          :              :

ab8500-gpio              :                      :              : GPIO Controller

Documentation/devicetree/bindings/power_supply/ab8500/charger.txt

0 → 100644
+25 −0
Original line number Diff line number Diff line 
=== AB8500 Charger Driver ===



Required Properties:

- compatible = Shall be "stericsson,ab8500-charger"

- battery = Shall be battery specific information

	Example:

	ab8500_charger {

		compatible = "stericsson,ab8500-charger";

		battery	   = <&ab8500_battery>;

	};



- vddadc-supply: Supply for USB and Main charger

	Example:

	ab8500-charger {

		vddadc-supply	= <&ab8500_ldo_tvout_reg>;

	}

- autopower_cfg:

	Boolean value depicting the presence of 'automatic poweron after powerloss'

	Example:

	ab8500-charger {

		autopower_cfg;

	};



For information on battery specific node, Ref:

Documentation/devicetree/bindings/power_supply/ab8500/fg.txt

arch/arm/boot/dts/dbx5x0.dtsi

+6 −0
Original line number Diff line number Diff line
@@ -367,6 +367,12 @@ 
					battery	   = <&ab8500_battery>;

				};



				ab8500_charger {

					compatible	= "stericsson,ab8500-charger";

					battery		= <&ab8500_battery>;

					vddadc-supply	= <&ab8500_ldo_tvout_reg>;

				};



				ab8500_usb {

					compatible = "stericsson,ab8500-usb";

					interrupts = < 90 0x4

drivers/mfd/ab8500-core.c

+5 −0
Original line number Diff line number Diff line
@@ -1041,8 +1041,13 @@ static struct mfd_cell __devinitdata abx500_common_devs[] = { 
static struct mfd_cell __devinitdata ab8500_bm_devs[] = {

	{

		.name = "ab8500-charger",

		.of_compatible = "stericsson,ab8500-charger",

		.num_resources = ARRAY_SIZE(ab8500_charger_resources),

		.resources = ab8500_charger_resources,

#ifndef CONFIG_OF

		.platform_data = &ab8500_bm_data,

		.pdata_size = sizeof(ab8500_bm_data),

#endif

	},

	{

		.name = "ab8500-btemp",

drivers/power/ab8500_charger.c

+45 −29
Original line number Diff line number Diff line
@@ -23,6 +23,8 @@ 
#include <linux/err.h>

#include <linux/workqueue.h>

#include <linux/kobject.h>

#include <linux/of.h>

#include <linux/mfd/core.h>

#include <linux/mfd/abx500/ab8500.h>

#include <linux/mfd/abx500.h>

#include <linux/mfd/abx500/ab8500-bm.h>
@@ -181,9 +183,9 @@ struct ab8500_charger_usb_state { 
 * @vbat		Battery voltage

 * @old_vbat		Previously measured battery voltage

 * @autopower		Indicate if we should have automatic pwron after pwrloss

 * @autopower_cfg	platform specific power config support for "pwron after pwrloss"

 * @parent:		Pointer to the struct ab8500

 * @gpadc:		Pointer to the struct gpadc

 * @pdata:		Pointer to the abx500_charger platform data

 * @bat:		Pointer to the abx500_bm platform data

 * @flags:		Structure for information about events triggered

 * @usb_state:		Structure for usb stack information
@@ -218,9 +220,9 @@ struct ab8500_charger { 
	int vbat;

	int old_vbat;

	bool autopower;

	bool autopower_cfg;

	struct ab8500 *parent;

	struct ab8500_gpadc *gpadc;

	struct abx500_bmdevs_plat_data *pdata;

	struct abx500_bm_data *bat;

	struct ab8500_charger_event_flags flags;

	struct ab8500_charger_usb_state usb_state;
@@ -322,7 +324,7 @@ static void ab8500_power_loss_handling(struct ab8500_charger *di) 
static void ab8500_power_supply_changed(struct ab8500_charger *di,

					struct power_supply *psy)

{

	if (di->pdata->autopower_cfg) {

	if (di->autopower_cfg) {

		if (!di->usb.charger_connected &&

		    !di->ac.charger_connected &&

		    di->autopower) {
@@ -2526,25 +2528,45 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev) 
	power_supply_unregister(&di->usb_chg.psy);

	power_supply_unregister(&di->ac_chg.psy);

	platform_set_drvdata(pdev, NULL);

	kfree(di);



	return 0;

}



static char *supply_interface[] = {

	"ab8500_chargalg",

	"ab8500_fg",

	"ab8500_btemp",

};



static int __devinit ab8500_charger_probe(struct platform_device *pdev)

{

	struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;

	struct device_node *np = pdev->dev.of_node;

	struct ab8500_charger *di;

	int irq, i, charger_status, ret = 0;



	if (!plat_data) {

		dev_err(&pdev->dev, "No platform data\n");

	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);

	if (!di) {

		dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__);

		return -ENOMEM;

	}

	di->bat = pdev->mfd_cell->platform_data;

	if (!di->bat) {

		if (np) {

			ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);

			if (ret) {

				dev_err(&pdev->dev,

					"failed to get battery information\n");

				return ret;

			}

			di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");

		} else {

			dev_err(&pdev->dev, "missing dt node for ab8500_charger\n");

			return -EINVAL;

		}



	di = kzalloc(sizeof(*di), GFP_KERNEL);

	if (!di)

		return -ENOMEM;

	} else {

		dev_info(&pdev->dev, "falling back to legacy platform data\n");

		di->autopower_cfg = false;

	}



	/* get parent data */

	di->dev = &pdev->dev;
@@ -2554,14 +2576,6 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) 
	/* initialize lock */

	spin_lock_init(&di->usb_state.usb_lock);



	/* get charger specific platform data */

	di->pdata = plat_data;

	if (!di->pdata) {

		dev_err(di->dev, "no charger platform data supplied\n");

		ret = -EINVAL;

		goto free_device_info;

	}



	di->autopower = false;



	/* AC supply */
@@ -2571,8 +2585,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) 
	di->ac_chg.psy.properties = ab8500_charger_ac_props;

	di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props);

	di->ac_chg.psy.get_property = ab8500_charger_ac_get_property;

	di->ac_chg.psy.supplied_to = di->pdata->supplied_to;

	di->ac_chg.psy.num_supplicants = di->pdata->num_supplicants;

	di->ac_chg.psy.supplied_to = supply_interface;

	di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),

	/* ux500_charger sub-class */

	di->ac_chg.ops.enable = &ab8500_charger_ac_en;

	di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
@@ -2589,8 +2603,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) 
	di->usb_chg.psy.properties = ab8500_charger_usb_props;

	di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props);

	di->usb_chg.psy.get_property = ab8500_charger_usb_get_property;

	di->usb_chg.psy.supplied_to = di->pdata->supplied_to;

	di->usb_chg.psy.num_supplicants = di->pdata->num_supplicants;

	di->usb_chg.psy.supplied_to = supply_interface;

	di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),

	/* ux500_charger sub-class */

	di->usb_chg.ops.enable = &ab8500_charger_usb_en;

	di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
@@ -2606,8 +2620,7 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) 
		create_singlethread_workqueue("ab8500_charger_wq");

	if (di->charger_wq == NULL) {

		dev_err(di->dev, "failed to create work queue\n");

		ret = -ENOMEM;

		goto free_device_info;

		return -ENOMEM;

	}



	/* Init work for HW failure check */
@@ -2749,12 +2762,14 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev) 
	regulator_put(di->regu);

free_charger_wq:

	destroy_workqueue(di->charger_wq);

free_device_info:

	kfree(di);



	return ret;

}



static const struct of_device_id ab8500_charger_match[] = {

	{ .compatible = "stericsson,ab8500-charger", },

	{ },

};



static struct platform_driver ab8500_charger_driver = {

	.probe = ab8500_charger_probe,

	.remove = __devexit_p(ab8500_charger_remove),
@@ -2763,6 +2778,7 @@ static struct platform_driver ab8500_charger_driver = { 
	.driver = {

		.name = "ab8500-charger",

		.owner = THIS_MODULE,

		.of_match_table = ab8500_charger_match,

	},

};