Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 47918f05 authored by Sonic Zhang's avatar Sonic Zhang Committed by Greg Kroah-Hartman
Browse files

serial:bfin_uart: Put TX IRQ in individual platform resource. 



Serial TX IRQ is not RX IRQ plus 1 in some blackfin chips.
Give individual platform resources to both TX and RX irqs.

Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 502fcb79

drivers/tty/serial/bfin_uart.c

+22 −14
Original line number Diff line number Diff line
@@ -667,17 +667,17 @@ static int bfin_serial_startup(struct uart_port *port) 
		kgdboc_break_enabled = 0;

	else {

# endif

	if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,

	if (request_irq(uart->rx_irq, bfin_serial_rx_int, IRQF_DISABLED,

	     "BFIN_UART_RX", uart)) {

		printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");

		return -EBUSY;

	}



	if (request_irq

	    (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,

	    (uart->tx_irq, bfin_serial_tx_int, IRQF_DISABLED,

	     "BFIN_UART_TX", uart)) {

		printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");

		free_irq(uart->port.irq, uart);

		free_irq(uart->rx_irq, uart);

		return -EBUSY;

	}
@@ -692,7 +692,7 @@ static int bfin_serial_startup(struct uart_port *port) 
		 */

		unsigned uart_dma_ch_rx, uart_dma_ch_tx;



		switch (uart->port.irq) {

		switch (uart->rx_irq) {

		case IRQ_UART3_RX:

			uart_dma_ch_rx = CH_UART3_RX;

			uart_dma_ch_tx = CH_UART3_TX;
@@ -709,16 +709,16 @@ static int bfin_serial_startup(struct uart_port *port) 
		if (uart_dma_ch_rx &&

			request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {

			printk(KERN_NOTICE"Fail to attach UART interrupt\n");

			free_irq(uart->port.irq, uart);

			free_irq(uart->port.irq + 1, uart);

			free_irq(uart->rx_irq, uart);

			free_irq(uart->tx_irq, uart);

			return -EBUSY;

		}

		if (uart_dma_ch_tx &&

			request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {

			printk(KERN_NOTICE "Fail to attach UART interrupt\n");

			free_dma(uart_dma_ch_rx);

			free_irq(uart->port.irq, uart);

			free_irq(uart->port.irq + 1, uart);

			free_irq(uart->rx_irq, uart);

			free_irq(uart->tx_irq, uart);

			return -EBUSY;

		}

	}
@@ -785,8 +785,8 @@ static void bfin_serial_shutdown(struct uart_port *port) 
		break;

	};

#endif

	free_irq(uart->port.irq, uart);

	free_irq(uart->port.irq+1, uart);

	free_irq(uart->rx_irq, uart);

	free_irq(uart->tx_irq, uart);

#endif



#ifdef CONFIG_SERIAL_BFIN_CTSRTS
@@ -1319,14 +1319,22 @@ static int bfin_serial_probe(struct platform_device *pdev) 
		}

		uart->port.mapbase = res->start;



		uart->port.irq = platform_get_irq(pdev, 0);

		if (uart->port.irq < 0) {

			dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n");

		uart->tx_irq = platform_get_irq(pdev, 0);

		if (uart->tx_irq < 0) {

			dev_err(&pdev->dev, "No uart TX IRQ specified\n");

			ret = -ENOENT;

			goto out_error_unmap;

		}



		uart->rx_irq = platform_get_irq(pdev, 1);

		if (uart->rx_irq < 0) {

			dev_err(&pdev->dev, "No uart RX IRQ specified\n");

			ret = -ENOENT;

			goto out_error_unmap;

		}

		uart->port.irq = uart->rx_irq;



		uart->status_irq = platform_get_irq(pdev, 1);

		uart->status_irq = platform_get_irq(pdev, 2);

		if (uart->status_irq < 0) {

			dev_err(&pdev->dev, "No uart status IRQ specified\n");

			ret = -ENOENT;