ARM: dts: clps711x: Add DT Cirrus Logic EDB7211 Development board (46e6b3aa) · Commits · e / devices / android_kernel_fairphone_FP3

arch/arm/boot/dts/Makefile

+2 −0

Original line number	Diff line number	Diff line
		@@ -109,6 +109,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
		berlin2q-marvell-dmp.dtb
		dtb-$(CONFIG_ARCH_BRCMSTB) += \
		bcm7445-bcm97445svmb.dtb
		dtb-$(CONFIG_ARCH_CLPS711X) += \
		ep7211-edb7211.dtb
		dtb-$(CONFIG_ARCH_DAVINCI) += \
		da850-enbw-cmc.dtb \
		da850-evm.dtb

arch/arm/boot/dts/ep7209.dtsi

0 → 100644

+191 −0

Original line number	Diff line number	Diff line
		/*
		* The code contained herein is licensed under the GNU General Public
		* License. You may obtain a copy of the GNU General Public License
		* Version 2 or later at the following locations:
		*/

		/dts-v1/;

		#include "skeleton.dtsi"

		#include <dt-bindings/clock/clps711x-clock.h>

		/ {
		model = "Cirrus Logic EP7209";
		compatible = "cirrus,ep7209";

		aliases {
		gpio0 = &porta;
		gpio1 = &portb;
		gpio3 = &portd;
		gpio4 = &porte;
		serial0 = &uart1;
		serial1 = &uart2;
		spi0 = &spi;
		timer0 = &timer1;
		timer1 = &timer2;
		};

		cpus {
		#address-cells = <0>;
		#size-cells = <0>;

		cpu {
		device_type = "cpu";
		compatible = "arm,arm720t";
		};
		};

		soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&intc>;
		ranges;

		clks: clks@80000000 {
		#clock-cells = <1>;
		compatible = "cirrus,ep7209-clk";
		reg = <0x80000000 0xc000>;
		startup-frequency = <73728000>;
		};

		intc: intc@80000000 {
		compatible = "cirrus,ep7209-intc";
		reg = <0x80000000 0x4000>;
		interrupt-controller;
		#interrupt-cells = <1>;
		};

		porta: gpio@80000000 {
		compatible = "cirrus,ep7209-gpio";
		reg = <0x80000000 0x1 0x80000040 0x1>;
		gpio-controller;
		#gpio-cells = <2>;
		};

		portb: gpio@80000001 {
		compatible = "cirrus,ep7209-gpio";
		reg = <0x80000001 0x1 0x80000041 0x1>;
		gpio-controller;
		#gpio-cells = <2>;
		};

		portd: gpio@80000003 {
		compatible = "cirrus,ep7209-gpio";
		reg = <0x80000003 0x1 0x80000043 0x1>;
		gpio-controller;
		#gpio-cells = <2>;
		};

		porte: gpio@80000083 {
		compatible = "cirrus,ep7209-gpio";
		reg = <0x80000083 0x1 0x800000c3 0x1>;
		gpio-controller;
		#gpio-cells = <2>;
		};

		syscon1: syscon@80000100 {
		compatible = "cirrus,ep7209-syscon1", "syscon";
		reg = <0x80000100 0x80>;
		};

		bus: bus@80000180 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "cirrus,ep7209-bus", "simple-bus";
		clocks = <&clks CLPS711X_CLK_BUS>;
		reg = <0x80000180 0x80>;
		ranges = <
		0 0 0x00000000 0x10000000
		1 0 0x10000000 0x10000000
		2 0 0x20000000 0x10000000
		3 0 0x30000000 0x10000000
		4 0 0x40000000 0x10000000
		5 0 0x50000000 0x10000000
		6 0 0x60000000 0x0000c000
		7 0 0x70000000 0x00000080
		>;
		};

		fb: fb@800002c0 {
		compatible = "cirrus,ep7209-fb";
		reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
		clocks = <&clks CLPS711X_CLK_BUS>;
		status = "disabled";
		};

		timer1: timer@80000300 {
		compatible = "cirrus,ep7209-timer";
		reg = <0x80000300 0x4>;
		clocks = <&clks CLPS711X_CLK_TIMER1>;
		interrupts = <8>;
		};

		timer2: timer@80000340 {
		compatible = "cirrus,ep7209-timer";
		reg = <0x80000340 0x4>;
		clocks = <&clks CLPS711X_CLK_TIMER2>;
		interrupts = <9>;
		};

		pwm: pwm@80000400 {
		compatible = "cirrus,ep7209-pwm";
		reg = <0x80000400 0x4>;
		clocks = <&clks CLPS711X_CLK_PWM>;
		#pwm-cells = <1>;
		};

		uart1: uart@80000480 {
		compatible = "cirrus,ep7209-uart";
		reg = <0x80000480 0x80>;
		interrupts = <12 13>;
		clocks = <&clks CLPS711X_CLK_UART>;
		syscon = <&syscon1>;
		};

		spi: spi@80000500 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "cirrus,ep7209-spi";
		reg = <0x80000500 0x4>;
		interrupts = <15>;
		clocks = <&clks CLPS711X_CLK_SPI>;
		status = "disabled";
		};

		syscon2: syscon@80001100 {
		compatible = "cirrus,ep7209-syscon2", "syscon";
		reg = <0x80001100 0x80>;
		};

		uart2: uart@80001480 {
		compatible = "cirrus,ep7209-uart";
		reg = <0x80001480 0x80>;
		interrupts = <28 29>;
		clocks = <&clks CLPS711X_CLK_UART>;
		syscon = <&syscon2>;
		};

		dai: dai@80002000 {
		#sound-dai-cells = <0>;
		compatible = "cirrus,ep7209-dai";
		reg = <0x80002000 0x604>;
		clocks = <&clks CLPS711X_CLK_PLL>;
		clock-names = "pll";
		interrupts = <32>;
		status = "disabled";
		};

		syscon3: syscon@80002200 {
		compatible = "cirrus,ep7209-syscon3", "syscon";
		reg = <0x80002200 0x40>;
		};
		};

		mctrl: mctrl {
		compatible = "cirrus,ep7209-mctrl-gpio";
		gpio-controller;
		#gpio-cells = <2>;
		};
		};

arch/arm/boot/dts/ep7211-edb7211.dts

0 → 100644

+100 −0

Original line number	Diff line number	Diff line
		/*
		* The code contained herein is licensed under the GNU General Public
		* License. You may obtain a copy of the GNU General Public License
		* Version 2 or later at the following locations:
		*/

		#include "ep7211.dtsi"
		#include <dt-bindings/gpio/gpio.h>

		/ {
		model = "Cirrus Logic EP7211 Development Board";
		compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";

		memory {
		reg = <0xc0000000 0x02000000>;
		};

		backlight: backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm 0>;
		brightness-levels = <
		0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
		0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf
		>;
		default-brightness-level = <0x0>;
		power-supply = <&blen>;
		};

		display: display {
		model = "320x240x4";
		native-mode = <&timing0>;
		bits-per-pixel = <4>;
		ac-prescale = <17>;

		display-timings {
		timing0: 320x240 {
		hactive = <320>;
		hback-porch = <0>;
		hfront-porch = <0>;
		hsync-len = <0>;
		vactive = <240>;
		vback-porch = <0>;
		vfront-porch = <0>;
		vsync-len = <0>;
		clock-frequency = <6500000>;
		};
		};
		};

		i2c: i2c {
		compatible = "i2c-gpio";
		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
		<&portd 5 GPIO_ACTIVE_HIGH>;
		i2c-gpio,delay-us = <2>;
		i2c-gpio,scl-output-only;
		#address-cells = <1>;
		#size-cells = <0>;
		};

		lcddc: lcddc {
		compatible = "regulator-fixed";
		regulator-name = "BACKLIGHT ENABLE";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
		};

		blen: blen {
		compatible = "regulator-fixed";
		regulator-name = "BACKLIGHT ENABLE";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
		};
		};

		&bus {
		flash: nor@00000000 {
		compatible = "cfi-flash";
		reg = <0 0x00000000 0x02000000>;
		bank-width = <2>;
		#address-cells = <1>;
		#size-cells = <1>;
		};
		};

		&fb {
		display = <&display>;
		lcd-supply = <&lcddc>;
		status = "okay";
		};

		&portd {
		lcden {
		gpio-hog;
		gpios = <2 GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "LCD ENABLE";
		};
		};

arch/arm/boot/dts/ep7211.dtsi

0 → 100644

+12 −0

Original line number	Diff line number	Diff line
		/*
		* The code contained herein is licensed under the GNU General Public
		* License. You may obtain a copy of the GNU General Public License
		* Version 2 or later at the following locations:
		*/

		#include "ep7209.dtsi"

		/ {
		model = "Cirrus Logic EP7211";
		compatible = "cirrus,ep7211", "cirrus,ep7209";
		};