Merge "Change LCM to command mode" into 8901-fairphone-p-vanilla (43d6ef25) · Commits · e / devices / android_kernel_fairphone_FP3

arch/arm64/boot/dts/qcom/dsi-hx83112b-djn-1080p-cmd.dtsi

0 → 100755

+93 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&mdss_mdp {
		dsi_djn_hx83112b_1080p_cmd: qcom,mdss_dsi_djn_hx83112b_1080p_cmd {
		qcom,mdss-dsi-panel-name =
		"djn hx83112b 1080p cmd mode dsi panel";
		//[Arima][8901][JialongJhan] enable LCM Command mode 20190403 Start
		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
		//[Arima][8901][JialongJhan] enable LCM Command mode 20190403 End
		qcom,mdss-dsi-panel-framerate = <60>;
		qcom,mdss-dsi-virtual-channel-id = <0>;
		qcom,mdss-dsi-stream = <0>;
		qcom,mdss-dsi-panel-width = <1080>;
		qcom,mdss-dsi-panel-height = <2160>;
		qcom,mdss-dsi-h-front-porch = <40>;
		qcom,mdss-dsi-h-back-porch = <12>;
		qcom,mdss-dsi-h-pulse-width = <4>;
		qcom,mdss-dsi-h-sync-skew = <0>;
		qcom,mdss-dsi-v-back-porch = <2>;
		qcom,mdss-dsi-v-front-porch = <32>;
		qcom,mdss-dsi-v-pulse-width = <2>;
		qcom,mdss-dsi-h-left-border = <0>;
		qcom,mdss-dsi-h-right-border = <0>;
		qcom,mdss-dsi-v-top-border = <0>;
		qcom,mdss-dsi-v-bottom-border = <0>;
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		//[Arima][8901][JialongJhan] enable LCM Command mode 20190403 Start
		qcom,mdss-dsi-te-pin-select = <1>;
		qcom,mdss-dsi-te-dcs-command = <1>;
		qcom,mdss-dsi-te-check-enable;
		qcom,mdss-dsi-te-using-te-pin;
		//[Arima][8901][JialongJhan] enable LCM Command mode 20190403 End
		//Qcom
		qcom,mdss-tear-check-sync-init-val = <2160>;
		qcom,mdss-tear-check-sync-threshold-start = <4>;
		qcom,mdss-tear-check-sync-threshold-continue = <4>;
		qcom,mdss-tear-check-start-pos = <2160>;
		//Qcom
		qcom,mdss-dsi-h-sync-pulse = <0>;
		qcom,mdss-dsi-traffic-mode = "burst_mode";
		qcom,mdss-dsi-bllp-eof-power-mode;
		qcom,mdss-dsi-bllp-power-mode;
		qcom,mdss-dsi-lane-0-state;
		qcom,mdss-dsi-lane-1-state;
		qcom,mdss-dsi-lane-2-state;
		qcom,mdss-dsi-lane-3-state;
		//qcom,mdss-dsi-hfp-power-mode;
		//qcom,mdss-dsi-hbp-power-mode;
		qcom,mdss-dsi-hsa-power-mode;
		qcom,mdss-pan-physical-width-dimension=<65>;
		qcom,mdss-pan-physical-height-dimension=<128>;
		qcom,mdss-dsi-panel-timings = [e6 38 26 00 68 6e 2a
		3c 44 03 04 00];
		qcom,mdss-dsi-t-clk-post = <0x0d>;
		qcom,mdss-dsi-t-clk-pre = <0x2f>;
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,mdss-dsi-dma-trigger = "trigger_sw";
		qcom,mdss-dsi-mdp-trigger = "none";
		//[Arima][8901][Jialong]LCM initial code from IC firmware Start
		qcom,mdss-dsi-on-command = [
		05 01 00 00 78 00 02 11 00
		05 01 00 00 14 00 02 29 00
		39 01 00 00 00 00 03 51 00 00
		39 01 00 00 00 00 02 53 24];
		//[Arima][8901][Jialong]LCM initial code from IC firmware End
		qcom,mdss-dsi-off-command = [05 01 00 00 14 00 02 28 00
		05 01 00 00 78 00 02 10 00];
		qcom,mdss-dsi-off-dstb-command = [
		39 01 00 00 00 00 04 B9 83 11 2A
		39 01 00 00 00 00 02 BD 00
		39 01 00 00 50 00 02 B1 09];
		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;
		qcom,mdss-dsi-tx-eot-append;
		qcom,mdss-dsi-lp11-init;
		qcom,mdss-dsi-post-init-delay = <1>;
		};
		};

arch/arm64/boot/dts/qcom/msm8953-mdss-panels.dtsi

+23 −0

Original line number	Diff line number	Diff line
		@@ -30,6 +30,7 @@
		#include "dsi-panel-inxnt51021-1200p-video.dtsi"
		/[Arima_8901][Jialong] lcm driver porting begin/
		#include "dsi-hx83112b-truly-1080p-video.dtsi"
		#include "dsi-hx83112b-djn-1080p-cmd.dtsi"
		/[Arima_8901][Jialong] lcm driver porting end/

		&soc {
		@@ -96,6 +97,28 @@
		};
		/[Arima_8901][Jialong] lcm driver porting end/

		//[Arima][8901][JialongJhan] Command mode 20190516 Start
		&dsi_djn_hx83112b_1080p_cmd {
		qcom,mdss-dsi-panel-timings-phy-v2 = [24 1e 08 09 05 03 04 a0
		24 1e 08 09 05 03 04 a0
		24 1e 08 09 05 03 04 a0
		24 1e 08 09 05 03 04 a0
		24 1a 08 09 05 03 04 a0];
		qcom,mdss-dsi-min-refresh-rate = <48>;
		qcom,mdss-dsi-max-refresh-rate = <60>;
		qcom,mdss-dsi-pan-enable-dynamic-fps;
		qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp";
		//qcom,esd-check-enabled;
		//qcom,mdss-dsi-panel-status-check-mode = "reg_read";
		//qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
		qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";
		//qcom,mdss-dsi-panel-status-value = <0x9c>;
		//qcom,mdss-dsi-panel-on-check-value = <0x9c>;
		//qcom,mdss-dsi-panel-status-read-length = <1>;
		//qcom,mdss-dsi-panel-max-error-count = <3>;
		};
		//[Arima][8901][JialongJhan] Command mode 20190516 End

		&dsi_truly_1080_vid {
		qcom,mdss-dsi-panel-timings-phy-v2 = [23 1e 08 09 05 03 04 a0
		23 1e 08 09 05 03 04 a0

arch/arm64/boot/dts/qcom/msm8953-mtp.dtsi

+11 −1

Original line number	Diff line number	Diff line
		@@ -143,7 +143,10 @@
		/[Arima_8901][Jialong] lcm driver porting begin/
		&mdss_dsi0 {
		#if 1
		qcom,dsi-pref-prim-pan = <&dsi_hx83112b_truly_1080p_video>;
		//[Arima][8901][JialongJhan] Command mode 20190516 Start
		qcom,dsi-pref-prim-pan = <&dsi_djn_hx83112b_1080p_cmd>;
		//qcom,dsi-pref-prim-pan = <&dsi_hx83112b_truly_1080p_video>;
		//[Arima][8901][JialongJhan] Command mode 20190516 End
		#else
		qcom,dsi-pref-prim-pan = <&dsi_truly_1080_vid>;
		#endif
		@@ -179,6 +182,13 @@
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		};

		&dsi_djn_hx83112b_1080p_cmd {
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		};
		/[Arima_8901][Jialong] lcm driver porting end/

		&dsi_truly_1080_vid {

drivers/video/fbdev/msm/mdss_dsi_panel.c

+4 −0

Original line number	Diff line number	Diff line
		@@ -864,6 +864,10 @@ static void mdss_dsi_panel_bl_ctrl(struct mdss_panel_data *pdata,
		}
		/[Arima_8901][Jialongjhan] Expose display revision 20190326 end/

		//[Arima][8901][JialongJhan] Command mode debug fuzzy screen 20190516 Start
		mdelay(1);
		//[Arima][8901][JialongJhan] Command mode debug fuzzy screen 20190516 End

		/*
		* Some backlight controllers specify a minimum duty cycle
		* for the backlight brightness. If the brightness is less