Loading Documentation/devicetree/bindings/net/mediatek-net.txt +1 −1 Original line number Diff line number Diff line Loading @@ -7,7 +7,7 @@ have dual GMAC each represented by a child node.. * Ethernet controller node Required properties: - compatible: Should be "mediatek,mt7623-eth" - compatible: Should be "mediatek,mt2701-eth" - reg: Address and length of the register set for the device - interrupts: Should contain the three frame engines interrupts in numeric order. These are fe_int0, fe_int1 and fe_int2. Loading Documentation/devicetree/bindings/net/phy.txt +9 −0 Original line number Diff line number Diff line Loading @@ -35,6 +35,15 @@ Optional Properties: - broken-turn-around: If set, indicates the PHY device does not correctly release the turn around line low at the end of a MDIO transaction. - eee-broken-100tx: - eee-broken-1000t: - eee-broken-10gt: - eee-broken-1000kx: - eee-broken-10gkx4: - eee-broken-10gkr: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. Example: ethernet-phy@0 { Loading Documentation/devicetree/bindings/net/ti,dp83867.txt +4 −2 Original line number Diff line number Diff line Loading @@ -3,9 +3,11 @@ Required properties: - reg - The ID number for the phy, usually a small integer - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values Loading Makefile +1 −1 Original line number Diff line number Diff line VERSION = 4 PATCHLEVEL = 9 SUBLEVEL = 35 SUBLEVEL = 36 EXTRAVERSION = NAME = Roaring Lionus Loading arch/arm/boot/dts/logicpd-torpedo-som.dtsi +1 −1 Original line number Diff line number Diff line Loading @@ -121,7 +121,7 @@ &i2c3 { clock-frequency = <400000>; at24@50 { compatible = "at24,24c02"; compatible = "atmel,24c64"; readonly; reg = <0x50>; }; Loading Loading
Documentation/devicetree/bindings/net/mediatek-net.txt +1 −1 Original line number Diff line number Diff line Loading @@ -7,7 +7,7 @@ have dual GMAC each represented by a child node.. * Ethernet controller node Required properties: - compatible: Should be "mediatek,mt7623-eth" - compatible: Should be "mediatek,mt2701-eth" - reg: Address and length of the register set for the device - interrupts: Should contain the three frame engines interrupts in numeric order. These are fe_int0, fe_int1 and fe_int2. Loading
Documentation/devicetree/bindings/net/phy.txt +9 −0 Original line number Diff line number Diff line Loading @@ -35,6 +35,15 @@ Optional Properties: - broken-turn-around: If set, indicates the PHY device does not correctly release the turn around line low at the end of a MDIO transaction. - eee-broken-100tx: - eee-broken-1000t: - eee-broken-10gt: - eee-broken-1000kx: - eee-broken-10gkx4: - eee-broken-10gkr: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. Example: ethernet-phy@0 { Loading
Documentation/devicetree/bindings/net/ti,dp83867.txt +4 −2 Original line number Diff line number Diff line Loading @@ -3,9 +3,11 @@ Required properties: - reg - The ID number for the phy, usually a small integer - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values Loading
Makefile +1 −1 Original line number Diff line number Diff line VERSION = 4 PATCHLEVEL = 9 SUBLEVEL = 35 SUBLEVEL = 36 EXTRAVERSION = NAME = Roaring Lionus Loading
arch/arm/boot/dts/logicpd-torpedo-som.dtsi +1 −1 Original line number Diff line number Diff line Loading @@ -121,7 +121,7 @@ &i2c3 { clock-frequency = <400000>; at24@50 { compatible = "at24,24c02"; compatible = "atmel,24c64"; readonly; reg = <0x50>; }; Loading