Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 35902cf1 authored by Olof Johansson's avatar Olof Johansson
Browse files

Merge tag 'at91-ab-4.8-dt2' of... 

Merge tag 'at91-ab-4.8-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT Changes for 4.8 #2:
 - New board: at91sam9260ek
 - Fixes for the sam9_l9260
 - Sama5d2 Xplained PMIC fix
 - Addition of the PMU node for the sama5d2

* tag 'at91-ab-4.8-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

:
  ARM: dts: at91: sama5d2_xplained: Update the pmic node
  ARM: dts: at91: sama5d2: add PMU node
  ARM: dts: at91: sam9_l9260: Modify information in LED nodes.
  ARM: dts: at91: sam9_l9260: Add pinctrl information to ethernet node.
  ARM: dts: at91: add at91sam9260ek board DT

Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 64f618a7 b8bca7ea

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -17,6 +17,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ 
	evk-pro3.dtb \

	tny_a9260.dtb \

	usb_a9260.dtb \

	at91sam9260ek.dtb \

	at91sam9261ek.dtb \

	at91sam9263ek.dtb \

	at91-sam9_l9260.dtb \

arch/arm/boot/dts/at91-sam9_l9260.dts

+10 −4
Original line number Diff line number Diff line
@@ -49,6 +49,7 @@ 
			};



			macb0: ethernet@fffc4000 {

				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;

				phy-mode = "mii";

				#address-cells = <1>;

				#size-cells = <0>;
@@ -105,11 +106,16 @@ 
	leds {

		compatible = "gpio-leds";



		b0 {

			label = "b0";

			gpios = <&pioA 6 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		pwr_led {

			label = "sam9-l9260:yellow:pwr";

			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "cpu0";

		};



		status_led {

			label = "sam9-l9260:green:status";

			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;

			linux,default-trigger = "timer";

		};

	};

};

arch/arm/boot/dts/at91-sama5d2_xplained.dts

+32 −9
Original line number Diff line number Diff line
@@ -158,56 +158,64 @@ 
				i2c-sda-hold-time-ns = <350>;

				status = "okay";



				pmic: act8865@5b {

					compatible = "active-semi,act8865";

				pmic@5b {

					compatible = "active-semi,act8945a";

					reg = <0x5b>;

					active-semi,vsel-high;

					active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;

					active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;

					active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;

					active-semi,input-voltage-threshold-microvolt = <6600>;

					active-semi,precondition-timeout = <40>;

					active-semi,total-timeout = <3>;

					pinctrl-names = "default";

					pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;

					status = "okay";



					regulators {

						vdd_1v35_reg: DCDC_REG1 {

						vdd_1v35_reg: REG_DCDC1 {

							regulator-name = "VDD_1V35";

							regulator-min-microvolt = <1350000>;

							regulator-max-microvolt = <1350000>;

							regulator-always-on;

						};



						vdd_1v2_reg: DCDC_REG2 {

						vdd_1v2_reg: REG_DCDC2 {

							regulator-name = "VDD_1V2";

							regulator-min-microvolt = <1100000>;

							regulator-max-microvolt = <1300000>;

							regulator-always-on;

						};



						vdd_3v3_reg: DCDC_REG3 {

						vdd_3v3_reg: REG_DCDC3 {

							regulator-name = "VDD_3V3";

							regulator-min-microvolt = <3300000>;

							regulator-max-microvolt = <3300000>;

							regulator-always-on;

						};



						vdd_fuse_reg: LDO_REG1 {

						vdd_fuse_reg: REG_LDO1 {

							regulator-name = "VDD_FUSE";

							regulator-min-microvolt = <2500000>;

							regulator-max-microvolt = <2500000>;

							regulator-always-on;

						};



						vdd_3v3_lp_reg: LDO_REG2 {

						vdd_3v3_lp_reg: REG_LDO2 {

							regulator-name = "VDD_3V3_LP";

							regulator-min-microvolt = <3300000>;

							regulator-max-microvolt = <3300000>;

							regulator-always-on;

						};



						vdd_led_reg: LDO_REG3 {

						vdd_led_reg: REG_LDO3 {

							regulator-name = "VDD_LED";

							regulator-min-microvolt = <3300000>;

							regulator-max-microvolt = <3300000>;

							regulator-always-on;

						};



						vdd_sdhc_1v8_reg: LDO_REG4 {

						vdd_sdhc_1v8_reg: REG_LDO4 {

							regulator-name = "VDD_SDHC_1V8";

							regulator-min-microvolt = <1800000>;

							regulator-max-microvolt = <1800000>;
@@ -309,6 +317,21 @@ 
					bias-disable;

				};



				pinctrl_charger_chglev: charger_chglev {

					pinmux = <PIN_PA12__GPIO>;

					bias-disable;

				};



				pinctrl_charger_irq: charger_irq {

					pinmux = <PIN_PB13__GPIO>;

					bias-disable;

				};



				pinctrl_charger_lbo: charger_lbo {

					pinmux = <PIN_PC8__GPIO>;

					bias-pull-up;

				};



				pinctrl_flx0_default: flx0_default {

					pinmux = <PIN_PB28__FLEXCOM0_IO0>,

						 <PIN_PB29__FLEXCOM0_IO1>;

arch/arm/boot/dts/at91sam9260ek.dts

0 → 100644
+211 −0
Original line number Diff line number Diff line 
/*

 * Device Tree file for Atmel at91sam9260 Evaluation Kit

 *

 *  Copyright (C) 2016 Atmel,

 *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

/dts-v1/;

#include "at91sam9260.dtsi"



/ {

	model = "Atmel at91sam9260ek";

	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";



	chosen {

		stdout-path = &dbgu;

	};



	memory {

		reg = <0x20000000 0x4000000>;

	};



	clocks {

		slow_xtal {

			clock-frequency = <32768>;

		};



		main_xtal {

			clock-frequency = <18432000>;

		};

	};



	ahb {

		apb {

			usb1: gadget@fffa4000 {

				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;

				status = "okay";

			};



			mmc0: mmc@fffa8000 {

				pinctrl-0 = <

					&pinctrl_board_mmc0_slot1

					&pinctrl_mmc0_clk

					&pinctrl_mmc0_slot1_cmd_dat0

					&pinctrl_mmc0_slot1_dat1_3>;

				status = "okay";

				slot@1 {

					reg = <1>;

					bus-width = <4>;

					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;

				};

			};



			usart0: serial@fffb0000 {

				pinctrl-0 =

					<&pinctrl_usart0

					 &pinctrl_usart0_rts

					 &pinctrl_usart0_cts

					 &pinctrl_usart0_dtr_dsr

					 &pinctrl_usart0_dcd

					 &pinctrl_usart0_ri>;

				status = "okay";

			};



			usart1: serial@fffb4000 {

				status = "okay";

			};



			ssc0: ssc@fffbc000 {

				status = "okay";

				pinctrl-0 = <&pinctrl_ssc0_tx>;

			};



			macb0: ethernet@fffc4000 {

				phy-mode = "rmii";

				status = "okay";

			};



			spi0: spi@fffc8000 {

				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;

				mtd_dataflash@0 {

					compatible = "atmel,at45", "atmel,dataflash";

					spi-max-frequency = <50000000>;

					reg = <1>;

				};

			};



			dbgu: serial@fffff200 {

				status = "okay";

			};



			pinctrl@fffff400 {

				board {

					pinctrl_board_mmc0_slot1: mmc0_slot1-board {

						atmel,pins =

							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;

					};

				};

			};



			shdwc@fffffd10 {

				atmel,wakeup-counter = <10>;

				atmel,wakeup-rtt-timer;

			};



			rtc@fffffd20 {

				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;

				status = "okay";

			};



			watchdog@fffffd40 {

				status = "okay";

			};



			gpbr: syscon@fffffd50 {

				status = "okay";

			};

		};



		usb0: ohci@500000 {

			num-ports = <2>;

			status = "okay";

		};



		nand0: nand@40000000 {

			nand-bus-width = <8>;

			nand-ecc-mode = "soft";

			nand-on-flash-bbt;

			status = "okay";

		};

	};



	gpio_keys {

		compatible = "gpio-keys";



		btn3 {

			label = "Button 3";

			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;

			linux,code = <0x103>;

			gpio-key,wakeup;

		};



		btn4 {

			label = "Button 4";

			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;

			linux,code = <0x104>;

			gpio-key,wakeup;

		};

	};



	i2c@0 {

		status = "okay";



		24c512@50 {

			compatible = "24c512";

			reg = <0x50>;

		};

	};



	leds {

		compatible = "gpio-leds";



		ds1 {

			label = "ds1";

			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		};



		ds5 {

			label = "ds5";

			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;

		};

	};

};

arch/arm/boot/dts/sama5d2.dtsi

+5 −0
Original line number Diff line number Diff line
@@ -72,6 +72,11 @@ 
		};

	};



	pmu {

		compatible = "arm,cortex-a5-pmu";

		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;

	};



	memory {

		reg = <0x20000000 0x20000000>;

	};