Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 33800e33 authored by Jagadeesh Banisetti's avatar Jagadeesh Banisetti Committed by Evgeniy Borisov
Browse files

ARM: dts: msm: Add new dts for msm8953 iot batcam 



Add initial dts file for msm8953 Bat Camera.

Change-Id: Ie10ee5d3cf74b4f1188383ec92234394461a2979
Signed-off-by: default avatarJagadeesh Banisetti <jbanis@codeaurora.org>
parent 6fe65785

arch/arm64/boot/dts/qcom/Makefile

+2 −1
Original line number Diff line number Diff line
@@ -519,7 +519,8 @@ dtb-$(CONFIG_ARCH_MSM8953) += msm8953-cdp.dtb \ 
	msm8953-pmi8937-mtp.dtb \

	msm8953-pmi8940-ext-codec-mtp.dtb \

	msm8953-pmi8937-ext-codec-mtp.dtb \

	msm8953-pmi632-cdp-s2.dtb

	msm8953-pmi632-cdp-s2.dtb \

	apq8053-batcam.dtb



dtb-$(CONFIG_ARCH_MSM8937) += msm8937-pmi8950-mtp.dtb \

	msm8937-interposer-sdm439-cdp.dtb \

arch/arm64/boot/dts/qcom/apq8053-batcam.dts

0 → 100644
+30 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/dts-v1/;



#include "apq8053.dtsi"

#include "pmi8950.dtsi"

#include "msm8953-mtp.dtsi"

#include "msm8953-pmi8950.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. APQ8053 + PMI8950 BATCAM";

	compatible = "qcom,apq8053-mtp", "qcom,apq8053", "qcom,mtp";

	qcom,board-id = <0x20 2>;

	qcom,pmic-id = <0x010016 0x010011 0x0 0x0>;

};



&blsp2_uart0 {

	status = "okay";

};

arch/arm64/boot/dts/qcom/apq8053-batcam.dtsi

0 → 100644
+448 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include "msm8953-pinctrl.dtsi"

#include "apq8053-camera-sensor-dragon.dtsi"

#include "pmi8950.dtsi"

#include "msm8953-pmi8950.dtsi"



&soc {

	vreg_5p0: vreg_5p0 {

		compatible = "regulator-fixed";

		regulator-name = "vreg_5p0";

		status = "ok";

		enable-active-high;

	};



	eldo_cam0_vreg: eldo_cam0_vreg {

		compatible = "regulator-fixed";

		regulator-name = "eldo_cam0_vreg";

		regulator-min-microvolt = <1100000>;

		regulator-max-microvolt = <1100000>;

		status = "ok";

		enable-active-high;

		vin-supply = <&pm8953_l5>;

	};



	eldo_cam1_vreg: eldo_cam1_vreg {

		compatible = "regulator-fixed";

		regulator-name = "eldo_cam1_vreg";

		regulator-min-microvolt = <1100000>;

		regulator-max-microvolt = <1100000>;

		status = "ok";

		enable-active-high;

		vin-supply = <&pm8953_l5>;

	};



	eldo_cam2_vreg: eldo_cam2_vreg {

		compatible = "regulator-fixed";

		regulator-name = "eldo_cam2_vreg";

		regulator-min-microvolt = <1100000>;

		regulator-max-microvolt = <1100000>;

		status = "ok";

		enable-active-high;

		vin-supply = <&pm8953_l5>;

	};



	eldo_cam1_vcm_vreg: eldo_cam1_vcm_vreg {

		compatible = "regulator-fixed";

		regulator-name = "eldo_cam1_vcm_vreg";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		status = "ok";

		enable-active-high;

	};



	cnss_sdio: qcom,cnss_sdio {

		compatible = "qcom,cnss_sdio";

		subsys-name = "AR6320";



		/**

		 * There is no vdd-wlan on board and this is not for DSRC.

		 * IO and XTAL share the same vreg.

		 */

		vdd-wlan-io-supply = <&pm8953_l6>;

		qcom,wlan-ramdump-dynamic = <0x200000>;

		qcom,msm-bus,name = "msm-cnss";

		qcom,msm-bus,num-cases = <4>;

		qcom,msm-bus,num-paths = <1>;

		qcom,msm-bus,vectors-KBps =

			<79 512 0 0>,             /* No vote */

			<79 512 6250 200000>,     /* 50 Mbps */

			<79 512 25000 200000>,    /* 200 Mbps */

			<79 512 2048000 4096000>; /* MAX */

	};



	bluetooth: bt_qca9379 {

		compatible = "qca,qca6174";

		qca,bt-reset-gpio = <&tlmm 76 0>; /* BT_EN */

	};



	cdc_dmic_gpios: cdc_dmic_pinctrl {

		compatible = "qcom,msm-cdc-pinctrl";

		pinctrl-names = "aud_active", "aud_sleep";

		pinctrl-0 = <&cdc_dmic0_clk_act &cdc_dmic0_data_act>;

		pinctrl-1 = <&cdc_dmic0_clk_sus &cdc_dmic0_data_sus>;

	};



	cdc_quat_mi2s_gpios: msm_cdc_pinctrl_quat {

		compatible = "qcom,msm-cdc-pinctrl";

		pinctrl-names = "aud_active", "aud_sleep";

		pinctrl-0 = <&sec_tlmm_lines_act>;

		pinctrl-1 = <&sec_tlmm_lines_sus>;

	};



};



&firmware {

	android {

		vbmeta {

			compatible = "android,vbmeta";

			parts = "vbmeta,boot,system,vendor,bluetooth,modem,oem";

		};

		fstab {

			/delete-node/ system;

			vendor {

				fsmgr_flags = "wait,slotselect,avb";

			};

		};

	};

};



&rpm_bus {

	rpm-regulator-ldoa4 {

		compatible = "qcom,rpm-smd-regulator-resource";

		qcom,resource-name = "ldoa";

		qcom,resource-id = <4>;

		qcom,regulator-type = <0>;

		qcom,hpm-min-load = <10000>;

		status = "okay";



		pm8953_l4: regulator-l4 {

			compatible = "qcom,rpm-smd-regulator";

			regulator-name = "pm8953_l4";

			qcom,set = <3>;

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			qcom,init-voltage = <1800000>;

			status = "okay";

		};

	};

};



&int_codec {

	status = "ok";

	qcom,model = "msm8953-openq624-snd-card";



	/delete-property/ qcom,cdc-us-euro-gpios;

	qcom,msm-hs-micbias-type = "internal";



	qcom,audio-routing =

		"RX_BIAS", "MCLK",

		"SPK_RX_BIAS", "MCLK",

		"INT_LDO_H", "MCLK",

		"MIC BIAS Internal1", "Handset Mic",

		"MIC BIAS Internal2", "Headset Mic",

		"MIC BIAS Internal1", "Secondary Mic",

		"AMIC1", "MIC BIAS Internal1",

		"AMIC2", "MIC BIAS Internal2",

		"AMIC3", "MIC BIAS Internal1",

		"DMIC1", "MIC BIAS Internal1",

		"MIC BIAS Internal1", "Digital Mic1",

		"DMIC2", "MIC BIAS Internal1",

		"MIC BIAS Internal1", "Digital Mic2";



	qcom,quat-mi2s-gpios = <&cdc_quat_mi2s_gpios>;

	qcom,cdc-dmic-gpios = <&cdc_dmic_gpios>;



	/delete-property/ asoc-wsa-codec-names;

	/delete-property/ asoc-wsa-codec-prefixes;

	/delete-property/ msm-vdd-wsa-switch-supply;

	/delete-property/ qcom,msm-vdd-wsa-switch-voltage;

	/delete-property/ qcom,msm-vdd-wsa-switch-current;

};

&spi_3 {

	status = "disabled";

};



&i2c_1 {

	status = "okay";

};



&i2c_2 {

	status = "okay";

};



&i2c_3 {

	status = "okay";

	focaltech@38 {

		compatible = "focaltech,5x06";

		reg = <0x38>;

		interrupt-parent = <&tlmm>;

		interrupts = <65 0x2>;

		vdd-supply = <&pm8953_l10>;

		vcc_i2c-supply = <&pm8953_l5>;

		/* pins used by touchscreen */

		pinctrl-names = "pmx_ts_active","pmx_ts_suspend",

			"pmx_ts_release";

		pinctrl-0 = <&ts_int_active &ts_reset_active>;

		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

		pinctrl-2 = <&ts_release>;

		focaltech,name = "ft5606";

		focaltech,family-id = <0x08>;

		focaltech,reset-gpio = <&tlmm 64 0x0>;

		focaltech,irq-gpio = <&tlmm 65 0x2008>;

		focaltech,display-coords = <0 0 1919 1199>;

		focaltech,panel-coords = <0 0 1919 1199>;

		focaltech,no-force-update;

		focaltech,i2c-pull-up;

		focaltech,group-id = <1>;

		focaltech,hard-reset-delay-ms = <20>;

		focaltech,soft-reset-delay-ms = <200>;

		focaltech,num-max-touches = <5>;

		focaltech,fw-delay-aa-ms = <30>;

		focaltech,fw-delay-55-ms = <30>;

		focaltech,fw-upgrade-id1 = <0x79>;

		focaltech,fw-upgrade-id2 = <0x08>;

		focaltech,fw-delay-readid-ms = <10>;

		focaltech,fw-delay-era-flsh-ms = <2000>;

		focaltech,fw-auto-cal;

		focaltech,resume-in-workqueue;

	};

};



&soc {

	/delete-node/ hbtp;

};



&i2c_5 {

	status = "disabled";

};



&blsp1_uart0 {

	status = "ok";

	pinctrl-names = "default";

	pinctrl-0 = <&uart_console_active>;

};



&sdhc_1 {

	/* device core power supply */

	vdd-supply = <&pm8953_l8>;

	qcom,vdd-voltage-level = <2900000 2900000>;

	qcom,vdd-current-level = <200 570000>;



	/* device communication power supply */

	vdd-io-supply = <&pm8953_l5>;

	qcom,vdd-io-always-on;

	qcom,vdd-io-lpm-sup;

	qcom,vdd-io-voltage-level = <1800000 1800000>;

	qcom,vdd-io-current-level = <200 325000>;



	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;

	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;



	qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000

								384000000>;

	qcom,nonremovable;

	qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";



	status = "ok";

};



&tlmm{

	sdc2_wlan_gpio_on: sdc2_wlan_gpio_on {

		mux {

			pins = "gpio75";

			function = "gpio";

		};

		config {

			pins = "gpio75";

			drive-strength = <10>;

			bias-pull-up;

			output-high;

		};

	};

	sdc2_wlan_gpio_off: sdc2_wlan_gpio_off {

		mux {

			pins = "gpio75";

			function = "gpio";

		};

		config {

			pins = "gpio75";

			drive-strength = <2>;

			bias-disable;

			output-low;

		};

	};

};



&sdhc_2 {

	/* device communication power supply */

	vdd-io-supply = <&pm8953_l12>;

	qcom,vdd-io-voltage-level = <1800000 1800000>;

	qcom,vdd-io-current-level = <200 22000>;



	qcom,core_3_0v_support;

	qcom,nonremovable;



	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on

		 &sdc2_wlan_gpio_on>;

	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off

		 &sdc2_wlan_gpio_off>;



	qcom,clk-rates = <400000 20000000 25000000 50000000>;

	qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";



	status = "ok";

};



&spmi_bus {

	qcom,pm8953@0 {

		qcom,power-on@800 {

			qcom,resin-gpiobase = <1019>;

			qcom,pon_2 {

				/delete-property/ linux,code;

			};

		};

	};

	qcom,pmi8950@2 {

		qcom,leds@a100 {

			compatible = "qcom,leds-qpnp";

			reg = <0xa100 0x100>;

			label = "mpp";



			qcom,led_mpp_2 {

				label = "mpp";

				linux,name = "green";

				linux,default-trigger = "none";

				qcom,default-state = "off";

				qcom,max-current = <40>;

				qcom,current-setting = <5>;

				qcom,id = <6>;

				qcom,mode = "manual";

				qcom,source-sel = <1>;

				qcom,mode-ctrl = <0x60>;

			};

		};



		qcom,leds@a300 {

			compatible = "qcom,leds-qpnp";

			reg = <0xa300 0x100>;

			label = "mpp";



			qcom,led_mpp_4 {

				label = "mpp";

				linux,name = "blue";

				linux,default-trigger = "none";

				qcom,default-state = "off";

				qcom,max-current = <40>;

				qcom,current-setting = <5>;

				qcom,id = <6>;

				qcom,mode = "manual";

				qcom,source-sel = <1>;

				qcom,mode-ctrl = <0x60>;

			};

		};

	};

};



&pm8953_typec {

	ss-mux-supply = <&pm8953_l13>;

	qcom,ssmux-gpio = <&tlmm 139 GPIO_ACTIVE_HIGH>;

	pinctrl-names = "default";

	pinctrl-0 = <&typec_ssmux_config>;

};



/{

	mtp_batterydata: qcom,battery-data {

		qcom,batt-id-range-pct = <15>;

		#include "batterydata-itech-3000mah.dtsi"

		#include "batterydata-ascent-3450mAh.dtsi"

	};

};



&pmi_haptic{

	status = "disabled";

	qcom,actuator-type = "lra";

	qcom,lra-auto-res-mode="qwd";

	qcom,lra-high-z="opt1";

	qcom,lra-res-cal-period = <0>;

	qcom,wave-play-rate-us = <4165>;

};



&flash_led {

	status = "disabled";

};



&pm8953_pwm {

	status = "ok";

};



&pm8953_vadc {

	/delete-node/ chan@13;

};



&pmi8950_gpios {

	pinctrl-names = "default";

	pinctrl-0 = <&pmi_gpio1_default>;

	pmi_gpio1_default: pmi8950_gpio1 {

		pins = "gpio1";

		function = "normal";

		input-enable;

		power-source = <0>;

		status = "okay";

	};

};



&pmi8950_mpps {

	pinctrl-names = "default";

	pinctrl-0 = <&ext_fet_wled_pwr_en_default>;

	ext_fet_wled_pwr_en_default: pmi8950_mpp3 {

		pins = "mpp3";  /* MPP_3 */

		function = "digital"; /* Digital */

		output-high; /* Output */

		drive-strength = <2>; /* 1.8 mA */

		power-source = <1>;

		bias-disable = <0>; /* no pull */

		status = "okay";

	};

};



&pm8953_gpios {

	pinctrl-names = "default";

	pinctrl-0 = <&pm_gpio1_div_clk2_default>;

	pm_gpio1_div_clk2_default: pm8953_gpio1 {

		pins = "gpio1";

		function = "normal";

		output-high;

		power-source = <1>;

		status = "okay";

	};

};



&pm8953_mpps {

	pinctrl-names = "default";

	pinctrl-0 = <&pm_mpp4_wled_pwm_ctrl_default>;

	pm_mpp4_wled_pwm_ctrl_default: pm8953_mpp4 {

		pins = "mpp4"; /* WLED_PWM_CTRL */

		function = "digital"; /* Digital */

		output-high;	/* Output */

		drive-strength = <2>; /* 1.8 mA */

		power-source = <0>; /* VPH_PWR */

		qcom,dtest = <1>; /* DTEST1 */

		bias-disable = <0>; /* no pull */

		status = "okay";

	};

};