Merge branch 'linus' into x86/tracehook (28c3cfd5) · Commits · e / devices / android_kernel_fairphone_FP3

Documentation/ABI/testing/sysfs-firmware-sgi_uv

0 → 100644

+27 −0

Original line number	Diff line number	Diff line
		What: /sys/firmware/sgi_uv/
		Date: August 2008
		Contact: Russ Anderson <rja@sgi.com>
		Description:
		The /sys/firmware/sgi_uv directory contains information
		about the SGI UV platform.

		Under that directory are a number of files:

		partition_id
		coherence_id

		The partition_id entry contains the partition id.
		SGI UV systems can be partitioned into multiple physical
		machines, which each partition running a unique copy
		of the operating system. Each partition will have a unique
		partition id. To display the partition id, use the command:

		cat /sys/firmware/sgi_uv/partition_id

		The coherence_id entry contains the coherence id.
		A partitioned SGI UV system can have one or more coherence
		domain. The coherence id indicates which coherence domain
		this partition is in. To display the coherence id, use the
		command:

		cat /sys/firmware/sgi_uv/coherence_id

Documentation/arm/Samsung-S3C24XX/GPIO.txt

+15 −0

Original line number	Diff line number	Diff line
		@@ -13,6 +13,21 @@ Introduction
		data-sheet/users manual to find out the complete list.


		GPIOLIB
		-------

		With the event of the GPIOLIB in drivers/gpio, support for some
		of the GPIO functions such as reading and writing a pin will
		be removed in favour of this common access method.

		Once all the extant drivers have been converted, the functions
		listed below will be removed (they may be marked as __deprecated
		in the near future).

		- s3c2410_gpio_getpin
		- s3c2410_gpio_setpin


		Headers
		-------

Documentation/arm/Samsung-S3C24XX/Overview.txt

+33 −2

Original line number	Diff line number	Diff line
		@@ -8,9 +8,10 @@ Introduction

		The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
		by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
		S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
		S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.

		Support for the S3C2400 and S3C24A0 series are in progress.

		Support for the S3C2400 series is in progress.

		Configuration
		-------------
		@@ -38,6 +39,22 @@ Layout
		Register, kernel and platform data definitions are held in the
		arch/arm/mach-s3c2410 directory./include/mach

		arch/arm/plat-s3c24xx:

		Files in here are either common to all the s3c24xx family,
		or are common to only some of them with names to indicate this
		status. The files that are not common to all are generally named
		with the initial cpu they support in the series to ensure a short
		name without any possibility of confusion with newer devices.

		As an example, initially s3c244x would cover s3c2440 and s3c2442, but
		with the s3c2443 which does not share many of the same drivers in
		this directory, the name becomes invalid. We stick to s3c2440-<x>
		to indicate a driver that is s3c2440 and s3c2442 compatible.

		This does mean that to find the status of any given SoC, a number
		of directories may need to be searched.


		Machines
		--------
		@@ -159,6 +176,17 @@ NAND
		For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt


		SD/MMC
		------

		The SD/MMC hardware pre S3C2443 is supported in the current
		kernel, the driver is drivers/mmc/host/s3cmci.c and supports
		1 and 4 bit SD or MMC cards.

		The SDIO behaviour of this driver has not been fully tested. There is no
		current support for hardware SDIO interrupts.


		Serial
		------

		@@ -178,6 +206,9 @@ GPIO
		The core contains support for manipulating the GPIO, see the
		documentation in GPIO.txt in the same directory as this file.

		Newer kernels carry GPIOLIB, and support is being moved towards
		this with some of the older support in line to be removed.


		Clock Management
		----------------

Documentation/dontdiff

+2 −0

Original line number	Diff line number	Diff line
		@@ -5,6 +5,8 @@
		*.css
		*.dvi
		*.eps
		*.fw.gen.S
		*.fw
		*.gif
		*.grep
		*.grp

Documentation/filesystems/ext4.txt

+6 −0

Original line number	Diff line number	Diff line
		@@ -26,6 +26,12 @@ Mailing list: linux-ext4@vger.kernel.org

		git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git

		- Note that it is highly important to install the mke2fs.conf file
		that comes with the e2fsprogs 1.41.x sources in /etc/mke2fs.conf. If
		you have edited the /etc/mke2fs.conf file installed on your system,
		you will need to merge your changes with the version from e2fsprogs
		1.41.x.

		- Create a new filesystem using the ext4dev filesystem type:

		# mke2fs -t ext4dev /dev/hda1