[ARM] 5323/1: Remove outdated empeg documentation.

Empeg, Ltd's Empeg MP3 Car Audio Player

The initial design is to go in your car, but you can use it at home, on a

boat... almost anywhere. The principle is to store CD-quality music using

MPEG technology onto a hard disk in the unit, and use the power of the

embedded computer to serve up the music you want.

For more details, see:

	http://www.empeg.com

Infra-red driver documentation.

Mike Crowe <mac@empeg.com>

(C) Empeg Ltd 1999

Not a lot here yet :-)

The Kenwood KCA-R6A remote control generates a sequence like the following:

Go low for approx 16T (Around 9000us)

Go high for approx 8T (Around 4000us)

Go low for less than 2T (Around 750us)

For each of the 32 bits

  Go high for more than 2T (Around 1500us) == 1

  Go high for less than T (Around 400us) == 0

  Go low for less than 2T (Around 750us)

Rather than repeat a signal when the button is held down certain buttons

generate the following code to indicate repetition.

Go low for approx 16T

Go high for approx 4T

Go low for less than 2T

(By removing the <2T from the start of the sequence and placing at the end

 it can be considered a stop bit but I found it easier to deal with it at

 the start).

The 32 bits are encoded as XxYy where x and y are the actual data values

while X and Y are the logical inverses of the associated data values. Using 

LSB first yields sensible codes for the numbers.

All codes are of the form b9xx

The numeric keys generate the code 0x where x is the number pressed.

Tuner		1c

Tape		1d

CD		1e

CD-MD-CH	1f

Track-		0a

Track+		0b

Rewind		0c

FF		0d

DNPP		5e

Play/Pause	0e

Vol+		14

Vol-		15

#!/bin/sh

mknod /dev/display c 244 0

mknod /dev/ir c 242 0

mknod /dev/usb0 c 243 0

mknod /dev/audio c 245 4

mknod /dev/dsp c 245 3

mknod /dev/mixer c 245 0

mknod /dev/empeg_state c 246 0

mknod /dev/radio0 c 81 64

ln -sf radio0 radio

ln -sf usb0 usb