ARM: dts: add a new device tree for qvr845 dvt version

/*

 * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

#include "sdm845-camera-sensor-qvr.dtsi"

/* PMD ToF MD101D */

&cam_cci {

	qcom,cam-sensor@4 {

		cell-index = <4>;

		compatible = "qcom,cam-sensor";

		reg = <0x4>;

		csiphy-sd-index = <3>;

		sensor-position-roll = <270>; /* checked, MTP845 */

		sensor-position-pitch = <0>; /* checked, MTP845 */

		sensor-position-yaw = <180>; /* checked, MTP845 */

		cam_vio-supply = <&pm8998_lvs1>; /* checked, MTP845 */

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_eyetracking_force>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig", "cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

				&cam_sensor_depth_active>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

				&cam_sensor_depth_suspend>;

		gpios = <&tlmm 16 0>, //MCLK1

			    <&tlmm 28 0>, //RESET

			    <&tlmm 23 0>, //vana

			    <&tlmm 24 0>;

		gpio-reset = <1>;   //RESET

		gpio-vana = <2>;

		gpio-vdig = <3>;

		gpio-req-tbl-num = <0 1 2 3> ;

		gpio-req-tbl-flags = <1 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1",

					"CAM_VDIG1";

		sensor-mode = <0>; // 0 -> back camera 2D

		cci-master = <1>; /* checked, MTP845 we are on I2C 0 */

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

/* 6dof */

	qcom,camera@6 {

		cell-index = <6>;

		compatible = "qcom,cam-sensor";

		reg = <0x6>;

		csiphy-sd-index = <1>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&pm8998_s3>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

					"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				&max_6dof_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				&max_6dof_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 30 0>,

			<&tlmm 95 0>,

			<&tlmm 94 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vdig = <3>;

		gpio-req-tbl-num = <0 1 2 3 >;

		gpio-req-tbl-flags = <1 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

					"CAM_RESET3",

					"CAM_VANA3",

					"CAM_VDIG3" ;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};

 */

#include "sdm845-qvr.dtsi"

#include "sdm845-sde-display.dtsi"

#include "sdm845-camera-sensor-qvr.dtsi"

#include "sdm845-camera-sensor-qvr-dvt.dtsi"