Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 249602ea authored by Linux Build Service Account's avatar Linux Build Service Account Committed by Gerrit - the friendly Code Review server
Browse files

Merge "ARM: dts: msm: add camera sensor support for sdm845 rb3 device"

parents a2e5078b 55a5722c

arch/arm64/boot/dts/qcom/sdm845-camera-sensor-rb3.dtsi

0 → 100644
+575 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	led_flash_rear: qcom,camera-flash@0 {

		cell-index = <0>;

		reg = <0x00 0x00>;

		compatible = "qcom,camera-flash";

		flash-source = <&pmi8998_flash0 &pmi8998_flash1>;

		torch-source = <&pmi8998_torch0 &pmi8998_torch1>;

		switch-source = <&pmi8998_switch0>;

		status = "ok";

	};



	led_flash_rear_aux: qcom,camera-flash@1 {

		cell-index = <1>;

		reg = <0x01 0x00>;

		compatible = "qcom,camera-flash";

		flash-source = <&pmi8998_flash0 &pmi8998_flash1>;

		torch-source = <&pmi8998_torch0 &pmi8998_torch1>;

		switch-source = <&pmi8998_switch0>;

		status = "ok";

	};



	led_flash_front: qcom,camera-flash@2 {

		cell-index = <2>;

		reg = <0x02 0x00>;

		compatible = "qcom,camera-flash";

		flash-source = <&pmi8998_flash2>;

		torch-source = <&pmi8998_torch2>;

		switch-source = <&pmi8998_switch1>;

		status = "ok";

	};



	led_flash_iris: qcom,camera-flash@3 {

		cell-index = <3>;

		reg = <0x03 0x00>;

		compatible = "qcom,camera-flash";

		flash-source = <&pmi8998_flash2>;

		torch-source = <&pmi8998_torch2>;

		switch-source = <&pmi8998_switch2>;

		status = "ok";

	};



	actuator_regulator: gpio-regulator@0 {

		compatible = "regulator-fixed";

		reg = <0x00 0x00>;

		regulator-name = "actuator_regulator";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		regulator-enable-ramp-delay = <100>;

		enable-active-high;

		gpio = <&tlmm 27 0>;

		vin-supply = <&pmi8998_bob>;

	};



	camera_ldo: gpio-regulator@2 {

		compatible = "regulator-fixed";

		reg = <0x02 0x00>;

		regulator-name = "camera_ldo";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		regulator-enable-ramp-delay = <233>;

		enable-active-high;

		gpio = <&pm8998_gpios 9 0>;

		pinctrl-names = "default";

		pinctrl-0 = <&camera_dvdd_en_default>;

		vin-supply = <&pm8998_s3>;

	};



	camera_vana_ldo: gpio-regulator@4 {

		compatible = "regulator-fixed";

		reg = <0x04 0x00>;

		regulator-name = "camera_vana_ldo";

		regulator-min-microvolt = <2850000>;

		regulator-max-microvolt = <2850000>;

		regulator-enable-ramp-delay = <233>;

		enable-active-high;

		gpio = <&tlmm 10 0>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam_sensor_rear_vana>;

		vin-supply = <&pmi8998_bob>;

	};

};



&cam_cci {

	qcom,cam-res-mgr {

		compatible = "qcom,cam-res-mgr";

		status = "ok";

	};



	actuator_rear: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		cci-master = <0>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2800000>;

		rgltr-max-voltage = <2800000>;

		rgltr-load-current = <0>;

	};



	actuator_rear_aux: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		cci-master = <1>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2800000>;

		rgltr-max-voltage = <2800000>;

		rgltr-load-current = <0>;

	};



	actuator_front: qcom,actuator@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,actuator";

		cci-master = <1>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2800000>;

		rgltr-max-voltage = <2800000>;

		rgltr-load-current = <0>;

	};



	ois_rear: qcom,ois@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,ois";

		cci-master = <0>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2800000>;

		rgltr-max-voltage = <2800000>;

		rgltr-load-current = <0>;

		status = "ok";

	};



	eeprom_rear: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0 2800000>;

		rgltr-max-voltage = <0 3600000 1050000 0 2800000>;

		rgltr-load-current = <0 80000 105000 0 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 80 0>,

			<&tlmm 79 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA0";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_tof: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		slave-addr = <0xac>;

		num-blocks = <1>;

		i2c-freq-mode = <1>;



		page0 = <0 0x0 2 0x0 1 0>;

		poll0 = <0 0x0 2 0x0 1 0>;

		mem0 = <0x870 0x0 2 0x0 1 0>;



		cam_vio-supply = <&pm8998_lvs1>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 0>;

		rgltr-max-voltage = <0 0>;

		rgltr-load-current = <0 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

			&cam_sensor_tof_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

			&cam_sensor_tof_suspend>;

		gpios = <&tlmm 14 0>,

		      <&tlmm 8 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1","CAM_RESET1";

		cci-master = <0>;



		qcom,cam-power-seq-type ="cam_reset","cam_vio",

			"cam_clk","cam_reset";

		qcom,cam-power-seq-val = "cam_reset","cam_vio",

			"cam_mclk","cam_reset";

		qcom,cam-power-seq-cfg-val = <0 1 24000000 1>;

		qcom,cam-power-seq-delay = <1 0 1 18>;



		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_front: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		cam_vaf-supply = <&actuator_regulator>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk", "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0 2800000>;

		rgltr-max-voltage = <0 3600000 1050000 0 2800000>;

		rgltr-load-current = <0 80000 105000 0 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>,

			<&tlmm 8 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VANA2";

		sensor-position = <1>;

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	eeprom_back: qcom,eeprom@3 {

		cell-index = <3>;

		reg = <0x3>;

		compatible = "qcom,eeprom";

		cam_vana-supply = <>;

		cam_vdig-supply = <>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 0>;

		rgltr-max-voltage = <1800000 0>;

		rgltr-load-current = <80000  0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear4_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear4_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 12 0>,

			<&tlmm 69 0>;

		gpio-reset = <1>;

		gpio-custom1 = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET4",

					"CAM_CUSTOM4";

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@0 {

		cell-index = <0>;

		compatible = "qcom,cam-sensor";

		reg = <0x0>;

		csiphy-sd-index = <0>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		led-flash-src = <&led_flash_rear>;

		actuator-src = <&actuator_rear>;

		ois-src = <&ois_rear>;

		eeprom-src = <&eeprom_rear>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 80 0>,

			<&tlmm 79 0>;

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		reg = <0x1>;

		csiphy-sd-index = <1>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_tof>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 0>;

		rgltr-max-voltage = <0 0>;

		rgltr-load-current = <0 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

						&cam_sensor_tof_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

						&cam_sensor_tof_suspend>;

		gpios = <&tlmm 14 0>,

				<&tlmm 8 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1","CAM_RESET1";

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@2 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		reg = <0x02>;

		csiphy-sd-index = <2>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		eeprom-src = <&eeprom_front>;

		actuator-src = <&actuator_front>;

		led-flash-src = <&led_flash_front>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&camera_vana_ldo>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 2850000 1050000 0>;

		rgltr-max-voltage = <0 2850000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@3 {

		cell-index = <3>;

		compatible = "qcom,cam-sensor";

		reg = <0x03>;

		csiphy-sd-index = <3>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		led-flash-src = <>;

		cam_vdig-supply = <>;

		cam_vana-supply = <>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 0>;

		rgltr-max-voltage = <1800000 0>;

		rgltr-load-current = <100000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

				 &cam_sensor_tracking_active>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

				 &cam_sensor_tracking_suspend>;

		gpios = <&tlmm 16 0>,

			<&tlmm 21 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

					"CAM_RESET3";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@4 {

		cell-index = <4>;

		compatible = "qcom,cam-sensor";

		reg = <0x4>;

		csiphy-sd-index = <2>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		actuator-src = <>;

		led-flash-src = <>;

		eeprom-src = <&eeprom_back>;

		cam_vdig-supply = <>;

		cam_vana-supply = <>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1800000 0>;

		rgltr-max-voltage = <1800000 0>;

		rgltr-load-current = <80000  0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear4_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear4_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 12 0>,

			<&tlmm 69 0>;

		gpio-reset = <1>;

		gpio-custom1 = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET4",

					"CAM_CUSTOM4";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@5 {

		cell-index = <5>;

		compatible = "qcom,cam-sensor";

		reg = <0x05>;

		csiphy-sd-index = <1>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		led-flash-src = <>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&camera_vana_ldo>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 2850000 1050000 0>;

		rgltr-max-voltage = <0 2850000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};

arch/arm64/boot/dts/qcom/sdm845-pinctrl.dtsi

+0 −1
Original line number Diff line number Diff line
@@ -3407,7 +3407,6 @@ 
			};

		};





		trigout_a: trigout_a {

			mux {

				pins = "gpio90";

arch/arm64/boot/dts/qcom/sdm845-rb3.dtsi

0 → 100644
+543 −0

File added.

Preview size limit exceeded, changes collapsed.

arch/arm64/boot/dts/qcom/sdm845-v2.1-rb3.dts

+1 −0
Original line number Diff line number Diff line
@@ -13,6 +13,7 @@ 


/dts-v1/;

#include "sdm845-v2.1-rb3.dtsi"

#include "sdm845-camera-sensor-rb3.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. sda845 v2.1 TurboX-SOM_V01";

arch/arm64/boot/dts/qcom/sdm845-v2.1-rb3.dtsi

+89 −1
Original line number Diff line number Diff line
@@ -18,7 +18,7 @@ 


#include "sda845-v2.1.dtsi"

#include "sdm845-sde-display.dtsi"

#include "sdm845-mtp.dtsi"

#include "sdm845-rb3.dtsi"

#include "sdm845-audio-overlay.dtsi"



&labibb {
@@ -105,3 +105,91 @@ 
	status = "disabled";

};



&tlmm {

	cam_sensor_tof_active: cam_sensor_tof_active {

		/* RESET*/

		mux {

			pins = "gpio8";

			function = "gpio";

		};



		config {

			pins = "gpio8";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};



	cam_sensor_tof_suspend: cam_sensor_tof_suspend {

		/* RESET*/

		mux {

			pins = "gpio8";

			function = "gpio";

		};



		config {

			pins = "gpio8";

			bias-pull-down; /* PULL DOWN */

			drive-strength = <2>; /* 2 MA */

			output-low;

		};

	};



	cam_sensor_tracking_active: cam_sensor_tracking_active {

		/* RESET */

		mux {

			pins = "gpio21";

			function = "gpio";

		};



		config {

			pins = "gpio21";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};



	cam_sensor_tracking_suspend: cam_sensor_tracking_suspend {

		/* RESET */

		mux {

			pins = "gpio21";

			function = "gpio";

		};



		config {

			pins = "gpio21";

			bias-pull-down; /* PULL DOWN */

			drive-strength = <2>; /* 2 MA */

			output-low;

		};

	};



	cam_sensor_rear4_active: cam_sensor_rear4_active {

		/* RESET */

		mux {

			pins = "gpio12","gpio69";

			function = "gpio";

		};



		config {

			pins = "gpio12","gpio69";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};



	cam_sensor_rear4_suspend: cam_sensor_rear4_suspend {

		/* RESET */

		mux {

			pins = "gpio12","gpio69";

			function = "gpio";

		};



		config {

			pins = "gpio12","gpio69";

			bias-pull-down; /* PULL DOWN */

			drive-strength = <2>; /* 2 MA */

			output-low;

		};

	};

};