Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2338b9e4 authored by Mathias Nyman's avatar Mathias Nyman Committed by Greg Kroah-Hartman
Browse files

xhci: define the new default speed ID for SuperSpeedPlus used by xhci hw 



USB 3.1 capable xhci controllers use a new default speed ID "5" in the
PORTSC register to represent a 10Gbps connection speed of a SuperSpeedPlus
device

Make sure the xhci driver can handle the returned SuperSpeedPlus speed ID
properly

Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5693e0b7

drivers/usb/host/xhci-hub.c

+3 −3
Original line number Diff line number Diff line
@@ -713,7 +713,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, 
			status |= USB_PORT_STAT_SUSPEND;

	}

	if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&

			!DEV_SUPERSPEED(raw_port_status)) {

		!DEV_SUPERSPEED_ANY(raw_port_status)) {

		if ((raw_port_status & PORT_RESET) ||

				!(raw_port_status & PORT_PE))

			return 0xffffffff;
@@ -1311,14 +1311,14 @@ int xhci_bus_resume(struct usb_hcd *hcd) 
		u32 temp;



		temp = readl(port_array[port_index]);

		if (DEV_SUPERSPEED(temp))

		if (DEV_SUPERSPEED_ANY(temp))

			temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);

		else

			temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);

		if (test_bit(port_index, &bus_state->bus_suspended) &&

		    (temp & PORT_PLS_MASK)) {

			set_bit(port_index, &port_was_suspended);

			if (!DEV_SUPERSPEED(temp)) {

			if (!DEV_SUPERSPEED_ANY(temp)) {

				xhci_set_link_state(xhci, port_array,

						port_index, XDEV_RESUME);

				need_usb2_u3_exit = true;

drivers/usb/host/xhci-ring.c

+3 −3
Original line number Diff line number Diff line
@@ -1567,7 +1567,7 @@ static void handle_port_status(struct xhci_hcd *xhci, 
			goto cleanup;

		}



		if (DEV_SUPERSPEED(temp)) {

		if (DEV_SUPERSPEED_ANY(temp)) {

			xhci_dbg(xhci, "remote wake SS port %d\n", port_id);

			/* Set a flag to say the port signaled remote wakeup,

			 * so we can tell the difference between the end of
@@ -1595,7 +1595,7 @@ static void handle_port_status(struct xhci_hcd *xhci, 
	}



	if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 &&

			DEV_SUPERSPEED(temp)) {

			DEV_SUPERSPEED_ANY(temp)) {

		xhci_dbg(xhci, "resume SS port %d finished\n", port_id);

		/* We've just brought the device into U0 through either the

		 * Resume state after a device remote wakeup, or through the
@@ -1625,7 +1625,7 @@ static void handle_port_status(struct xhci_hcd *xhci, 
	 * RExit to a disconnect state).  If so, let the the driver know it's

	 * out of the RExit state.

	 */

	if (!DEV_SUPERSPEED(temp) &&

	if (!DEV_SUPERSPEED_ANY(temp) &&

			test_and_clear_bit(faked_port_index,

				&bus_state->rexit_ports)) {

		complete(&bus_state->rexit_done[faked_port_index]);

drivers/usb/host/xhci.h

+4 −0
Original line number Diff line number Diff line
@@ -327,11 +327,15 @@ struct xhci_op_regs { 
#define	XDEV_LS			(0x2 << 10)

#define	XDEV_HS			(0x3 << 10)

#define	XDEV_SS			(0x4 << 10)

#define	XDEV_SSP		(0x5 << 10)

#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0<<10))

#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)

#define DEV_LOWSPEED(p)		(((p) & DEV_SPEED_MASK) == XDEV_LS)

#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)

#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)

#define DEV_SUPERSPEEDPLUS(p)	(((p) & DEV_SPEED_MASK) == XDEV_SSP)

#define DEV_SUPERSPEED_ANY(p)	(((p) & DEV_SPEED_MASK) >= XDEV_SS)



/* Bits 20:23 in the Slot Context are the speed for the device */

#define	SLOT_SPEED_FS		(XDEV_FS << 10)

#define	SLOT_SPEED_LS		(XDEV_LS << 10)